A4000381,382 - Assembly Instructions
Product by Signature Design by Ashley
Important Safety Information
Before beginning assembly, read the following safety notices carefully:
- Always use proper tools.
- Follow the assembly steps in order; do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep these instructions for future reference.
- Be very careful when handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors by yourself.
- When assembling products with electric cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, use a step ladder; do not stand on lower shelves to assemble upper shelves.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not designed to support the weight of a person.
- Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Disclaimer: Ashley Furniture Industries, LLC is not liable for damages or injuries that may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Part Identifier | Quantity | Description |
|---|---|---|
| A | 1 | Cabinet Base Unit |
| B | 1 | Top Panel |
| C | 4 | Legs/Posts |
| D | 4 | Top Panel Connectors/Screws |
Assembly Steps
Important Assembly Note: This unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
-
Step 1: Attach Legs to Base
Place the Cabinet Base Unit (A) on a flat, protected surface. Insert the four Legs (C) into the designated holes on the underside of the base. Secure each leg by inserting a bolt from the underside of the base through the leg. (Diagram visual: Part A with four legs C being attached from below).
-
Step 2: Attach Top Panel
Carefully place the Top Panel (B) onto the assembled Legs (C). Align the holes on the underside of the top panel with the tops of the legs. Secure the top panel by inserting the four Top Panel Connectors/Screws (D) through the designated holes on the underside of the top panel and into the legs. (Diagram visual: Part B being placed on top of the legs C, with parts D being inserted from below into the legs).
-
Step 3: Final Assembly
Ensure all parts are securely fastened and all connectors are tightened. The unit is now fully assembled. (Diagram visual: The fully assembled accent cabinet).
Customer Support & Contact Information
For replacement parts or assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
