Signature Design by Ashley A4000702 Accent Cabinet Assembly Instructions
Model: A4000702
Important Safety Notice
Always use proper tools. Follow assembly steps in order; do not skip any steps. Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. Periodically check to ensure that all connectors (bolts, screws, etc.) are tight. Keep these instructions for future reference.
Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
When assembling products that have electrical cords (lamps, lights, motors, power strips, etc.), always:
- (1) Make sure the electrical cord is unplugged before assembling.
- (2) Be careful not to twist or pinch the electrical cord during and after assembly.
- (3) DO NOT USE AN EXTENSION CORD WITH THIS PRODUCT.
Note: During charging, the device and the charger could heat up; this is normal. If the battery gets hotter than usual, the device may stop charging.
WARNING: Remove all metal objects like coins and keys from the charging surface and remove any metal objects attached to your mobile phone before placing the device on the charging surface. Some mobile devices or cases may attract metal objects.
When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
Do not sit or stand on tables, including but not limited to, end tables, cocktail tables, and dining tables, as tables are not engineered or designed to support the weight of a person.
Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| Ax1 | Main cabinet unit with shelves and doors. | 1 |
| Bx4 | Small cylindrical components, possibly feet or connectors. | 4 |
| Cx8 | 1/4" x 2" bolts. | 8 |
| Dx1 | A tool, likely a screwdriver or Allen wrench for assembly. | 1 |
| Ex1 | Anti-tip restraint kit, including a strap and mounting hardware. | 1 |
Assembly Instructions
Important Note: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
Step 1: Base Assembly
Attach the base component (Part A) to the main cabinet structure using four (4) Cx8 (1/4" x 2") bolts. Use the provided tool (Part D) for tightening.
Step 2: Door and Shelf Installation
Install the doors and shelves into the cabinet unit. The diagram illustrates the process of attaching hinges and inserting shelves into their designated slots.
Step 3: Install Anti-Tip Restraint
WARNING: The use of the included tipping restraint may reduce, but not eliminate, the risk of furniture tip over. Follow the instructions on the plastic bag for proper installation.
The anti-tip restraint (Part Ex1) should be installed to secure the unit to the wall. This helps prevent accidental tipping.
Adjusting Levelers
Use only a hand tool screwdriver to adjust the levelers located at the base of the unit.
- Turn the leveler in a clockwise direction to extend (raise the cabinet).
- Turn the leveler in a counterclockwise direction to retract (lower the cabinet).
Replacement Parts and Support
For replacement parts or further assistance, please contact:
Email: RTAParts@ashleyfurniture.com
Website: www.ashleyfurniture.parts
Phone: 1-844-966-0809
