Important Safety Information
READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
Parts Included
Assembly requires two or more people.
DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
- A: Main Base Unit (x1)
- B: Cushion (x1)
- C: Cylindrical Component (x1)
- D: Legs (x4)
Assembly Instructions
Please follow these steps carefully:
Step 1: Preparation
Unpack all components and verify you have all parts listed. Ensure you have the necessary tools. It is recommended that two or more people assemble this unit.
Step 2: Attach Legs
Take the main base unit (A) and attach the four legs (D) to the underside. Screw each leg securely into the designated mounting points. Ensure all legs are firmly attached.
Step 3: Position Cushion
Place the cushion (B) onto the main base unit (A). The cylindrical component (C) is also provided.
Step 4: Secure Cushion
The cushion (B) attaches to the base unit (A) via a zipper mechanism. Align the zipper on the cushion with the corresponding zipper on the base unit and zip them together securely. Ensure the zipper is fully closed for a snug fit.
Customer Support
For replacement parts or assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809