Nyxi Hyperion Pro Wireless Controller User Manual

Introduction

This manual provides instructions and information for the Nyxi Hyperion Pro Wireless Controller, designed for the Nintendo Switch gaming console.

Product Overview

The Nyxi Hyperion Pro is a high-performance, ergonomic wireless controller offering advanced features for an enhanced gaming experience on the Nintendo Switch.

Key Features:

• Ergonomic design for comfortable extended play.
• Programmable back buttons for customized control.
• Adjustable vibration intensity for immersive feedback.
• Integrated Turbo function for rapid button presses.
• Wireless Bluetooth 5.0 connectivity.
• Rechargeable Lithium-ion battery.
• USB-C charging port.
• Compatibility with Nintendo Switch.

Connectivity and Setup

Connecting to Nintendo Switch:

1. Ensure your Nintendo Switch console is powered on.
2. Press and hold the SYNC button on the Nyxi Hyperion Pro controller until the LED indicator begins to blink.
3. On your Nintendo Switch, navigate to the main menu and select 'System Settings'.
4. Scroll down to 'Controllers and Sensors' and select 'Change Grip/Order'.
5. The controller will automatically pair with your console. The LED indicator will turn solid blue upon successful connection.

LED Indicators:

• Solid Blue: Controller is successfully connected to the console.
• Blinking Blue: Controller is in pairing mode.
• Red: The controller's battery is low.

Advanced Features

Back Button Programming:

1. Press and hold the dedicated PROG button on the back of the controller.
2. While holding PROG, press the back button you wish to assign a function to.
3. Press the PROG button again to confirm and save the assignment.
4. Repeat this process for any other programmable back buttons.

Adjusting Vibration Intensity:

To customize the vibration feedback:

1. On your Nintendo Switch, go to 'System Settings' > 'Controllers and Sensors'.
2. Select 'Controller Vibration'.
3. Choose your preferred vibration intensity level.

Turbo Function:

To enable the Turbo function for a specific button:

1. Press and hold the button you want to set to Turbo.
2. While holding the button, press and hold the TURBO button.
3. Release both buttons. The button will now repeatedly activate when pressed.
4. To disable Turbo for a button, repeat the process or turn the controller off and on again.

Charging the Controller

The Nyxi Hyperion Pro features a built-in rechargeable battery.

Charging Procedure:

1. Connect the included USB-C cable to the USB-C port located on the top of the controller.
2. Connect the other end of the USB-C cable to a compatible USB power source (e.g., Nintendo Switch dock, USB wall adapter).
3. The LED indicator will display a red light while charging and will turn off or change color when fully charged.

Battery Life:

The controller provides up to 10 hours of playtime on a full charge. Charging typically takes approximately 2 hours.

Specifications

• Model: Nyxi Hyperion Pro
• Connectivity: Bluetooth 5.0
• Battery Type: Rechargeable Lithium-ion
• Playtime: Up to 10 hours
• Charging Time: Approximately 2 hours
• Input Port: USB-C
• Compatibility: Nintendo Switch

Compliance and Safety

This product complies with relevant safety and environmental standards.

• [CE marking]
• [RoHS compliant]

Please refer to the Nyxi website for detailed compliance information and safety guidelines.

Firmware Updates

To ensure optimal performance, it is recommended to keep the controller's firmware up to date.

Visit the official Nyxi website to download the latest firmware updates and the necessary update tool. Follow the on-screen instructions provided with the update software for the installation process.

Troubleshooting

Controller not connecting:

• Ensure the controller is charged.
• Make sure Bluetooth is enabled on your Nintendo Switch.
• Try re-pairing the controller by following the setup steps.
• Restart both the controller and the Nintendo Switch console.

Buttons not responding:

• Check if the controller is connected.
• Ensure no physical obstructions are preventing button presses.
• If a specific button is programmed, check its assignment.

For further assistance, please visit the Nyxi support website.