LG S70TY Wireless Soundbar: Simple Manual & Installation Guide

Product Overview

The LG S70TY is a wireless soundbar system designed to enhance your home audio experience. This manual covers specifications, safety guidelines, installation, connection procedures, and warranty information.

Specifications

• Dimensions (W x H x D): Approx. 950.0 mm x 63.0 mm x 115.0 mm (37.4 inch x 2.5 inch x 4.5 inch)
• Bus Power Supply (USB): 5 V ⎓ 500 mA
• Power Requirements & Consumption: Refer to the main label on the product.

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body.

Safety Information & Warnings

General Warnings:

• Risk of Electric Shock: Do not open the cover. Refer servicing to qualified personnel.
• Fire/Electric Shock Hazard: Do not expose this product to rain or moisture. Do not install in confined spaces like bookcases.
• Electrical Safety: Avoid using high voltage products nearby. Do not place naked flame sources (e.g., lighted candles) on the apparatus.
• Ventilation: Do not block ventilation openings. Install according to manufacturer's instructions. Ensure proper ventilation in built-in installations.
• Power: Install near an easily accessible power outlet. Unplug during lightning storms or when unused for long periods.
• Liquids: Do not expose to water (dripping or splashing). Do not place liquid-filled objects on the apparatus.
• Battery Safety: For models with batteries, handle with care to avoid fire or explosion. Dispose of batteries responsibly at designated collection points. Do not expose batteries to excessive heat.

Important Safety Instructions:

1. Read and keep these instructions.
2. Heed all warnings and follow all instructions.
3. Do not use this apparatus near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
6. Do not install near any heat sources (radiators, stoves, etc.).
7. Do not defeat the safety purpose of polarized or grounding-type plugs.
8. Protect the power cord from being walked on or pinched.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with specified carts, stands, or tables.
11. Unplug this apparatus during lightning storms or when unused for long periods.
12. Refer all servicing to qualified service personnel.

Symbols:

• ~ : AC (Alternating Current)
• 0 : DC (Direct Current)
• Π : Class II Equipment
• 1 : Standby
• ! : Power ON
• ⚠ : Dangerous Voltage

Installation and Setup

Follow these steps to connect your soundbar system.

Components:

• A: Soundbar
• B: Remote Control Receiver
• C: Status LED (Indicates connection and status)
• D: Rear Speakers (Sold separately, SPT8-S)
• E: Wireless Subwoofer (Install close to the soundbar)
• F: External Device (e.g., Blu-ray player, game console)

Connection Diagram Description:

The system connects your TV to the soundbar. An external device can connect to the soundbar's HDMI IN. The soundbar connects to the TV via HDMI (ARC/eARC) or Optical. The wireless subwoofer and rear speakers connect wirelessly to the soundbar. Power connections are made in a specific order: Subwoofer, then Rear Speakers, then Soundbar.

Step-by-Step Connection:

1. Connect Soundbar to TV: Use an optical cable or an HDMI cable (ARC/eARC recommended) to connect the soundbar to your TV's corresponding audio output.
2. Connect External Devices: Connect external devices (set-top box, game console) via HDMI to the soundbar's HDMI IN port or directly to your TV's HDMI IN ports.
3. Connect Rear Speakers (Optional): If using separately purchased rear speakers, connect them via speaker cables. Match the black striped cable to the negative terminal and the other cable to the positive terminal on each speaker.
4. Connect Power: Connect power in the following order: Wireless Subwoofer, then Rear Speakers, then the Soundbar.
5. Turn On: Turn on the soundbar. The wireless subwoofer and rear speakers should automatically connect. A green LED on these units indicates a successful wireless connection.

LED Status Indicators:

The Status LED (C) on the soundbar indicates different modes:

• Red blinking: Indicates the soundbar is not connected to the wireless subwoofer or rear speakers. To resolve, turn off the soundbar, press the PAIRING button on the subwoofer/rear speaker until it blinks green, then turn the soundbar back on.
• White blinking: Bluetooth pairing mode.
• Solid White: Bluetooth connected, or general TV connection (Optical/HDMI ARC), or USB connection.
• Golden yellow: External device connected via HDMI IN.

Note: LED behavior can vary. Refer to the product's specific indicators for precise status.

Connecting to Your TV:

1. Press the Function button on the soundbar or remote until the appropriate LED lights up (e.g., White for general TV audio, Golden yellow for HDMI IN).
2. On your TV's settings, select the audio output source as [HDMI ARC], [Optical], or [External Speaker].

Connecting to Your Smartphone via Bluetooth:

1. On your smartphone, go to Settings > Bluetooth and turn it on.
2. Press the Bluetooth pair button on the soundbar. The LED(s) will blink white.
3. On your smartphone, search for Bluetooth devices and select "LG S70TY(XX)".
4. Once connected, the LED(s) will light up solid white.

Connecting to the LG ThinQ App:

Install the LG ThinQ app from Google Play Store or Apple App Store on your smartphone. You can find more information regarding its use by selecting [Help] in [Setting] within the app.

Wireless Interference:

Keep the soundbar, subwoofer, and rear speakers at least 1 meter (3.3 ft) away from devices like wireless routers or microwave ovens to prevent interference.

Audio Output: If some speakers do not play audio, select the BASS BLAST (BASS BLAST+) sound mode.

LG Electronics, Inc. Limited Warranty - USA

LG Electronics warrants this product against defects in material or workmanship under normal use for a period of one (1) year from the original date of purchase for both parts and labor. This warranty is valid only to the original retail purchaser and applies only when purchased and used within the continental United States, Alaska, Hawaii, and U.S. Territories. Proof of Purchase is required. LG will, at its option, repair or replace the product. Shipping costs are paid by LG during the warranty period.

Warranty Exclusions: This limited warranty does not apply to service trips for installation, education, or unauthorized repairs. It also excludes damage or failure resulting from power failures, misuse, abuse, negligence, improper maintenance, acts of nature, unauthorized modifications, or use with non-approved accessories or components. Cosmetic damage, scratches, dents, chips, and damage resulting from institutional or commercial use are also excluded.

For full terms and conditions, please refer to the complete warranty documentation.

Customer Support

For assistance, troubleshooting, or to find an Authorized Service Center:

• Website: www.lg.com
• Phone: 1-800-243-0000 (Consumer) or 1-888-865-3026 (Commercial)
• Mail: LG Customer Interactive Center, P.O Box 240007, 201 James Record Road, Huntsville, Alabama 35813
• LG Electronics U.S.A., Inc.: 111 Sylvan Avenue, Englewood Cliffs, NJ 07632 USA

Register your product online at www.lg.com.