Product Overview
The Tivoli 24V FUSE - RGB LED strip is a high-quality lighting solution designed for versatile applications. It features a 3-channel RGB system, protected by Tivoli's exclusive eXo Shield for enhanced dust and moisture resistance. The strip utilizes 3-in-1 RGB chips and offers multiple mounting options, compatible with Tivoli's Urban channel series. With tight SMD LED spacing (8mm overall width) for smooth visual delivery and factory-applied 3M VHB adhesive tape for quick installation, it provides a professional finish. The strip is dimmable via DMX protocol and is DMX controllable, also compatible with Tivoli's CUEpro software (sold separately). It operates on low voltage (24V DC) and is rated IP54, backed by a 5-year warranty.
Dimensions
? The LED strip has a width of approximately 0.314 inches (8mm) and a thickness of approximately 0.094 inches. Cut increments are every 2 inches.
Order Guide
The product code for this LED strip is TPLFS. It is designed for Indoor (I) installation and features RGB LED type. The maximum run (MR) is specified, and it operates at 24V DC voltage.
Note: A layout/drawing must accompany each order showing run length and location. Runs with LEAD-C are rounded up to the next cut interval (unless otherwise specified). Runs with LEAD-D are rounded down to the next cut interval (unless otherwise specified).
Specifications
| Category | Item | Red | Green | Blue | RGB |
|---|---|---|---|---|---|
| Output | Kelvin Temperature | 54.9 | 166 | 44.4 | 254 |
| Lumens/ft | 38 | 87 | 26 | 48 | |
| Efficacy (Lm/W) | n/a | n/a | n/a | 58 | |
| CRI | 629 | 523 | 470 | n/a | |
| Wavelength (nm) | 1.4 | 1.9 | 1.7 | 5.3 | |
| Measured Power W/ft | 4.4 | ||||
| Listed Power W/ft. | |||||
| Max Run | 21' | ||||
| Electrical | Input Voltage | 24V DC | |||
| Power Supply | Class 2 | ||||
| Wire Size (End Prep) | 20 AWG, 4 wire | ||||
| Control | ?️ DMX | ||||
| Physical | LED Package | 3535 | |||
| LEDs/ft | 36 | ||||
| Adhesive | 3M VHB Tape | ||||
| Copper Trace | 3 Ounces | ||||
| Dimensions | 0.314" (8mm) | ||||
| Cut Increments | 2" | ||||
| Operating Temperature | ?️ -40°F (-40°C) to 140°F (60°C) | ||||
| Certification and Testing | Certification | UL Listed | |||
| Lumen Maintenance (L70) Hours | 60,000 | ||||
| Binning Tolerance | 2 Step MacAdams Eclipse | ||||
| Environment | ? IP54, Damp Location, Conformal Coated | ||||
| Warranty | ?️ 5 years | ||||
Power Leads and Jumpers
These components are installed by Tivoli's certified solderers.
- TPL-I-LEAD-4-C: ? LEAD/END - 24" standard 4 conductor 22AWG lead wire factory attached to one end of tape.
- TPL-I-LEAD-4-D: ? LEAD/LEAD - 24" standard 4 conductor 22AWG lead wire factory attached to both ends of tape.
- TPL-I-XEP-4: ? EXTRA LEAD WIRE - Additional factory attached 22AWG lead 4 wire to extend lengths of LEAD-C and LEAD-D up to 20 ft. max. Sold per foot.
- TPL-I-CONN: ? BUTT CONNECTORS (18-22AWG) - Used to interconnect factory attached lead wires. Sold individually.
Accessories
- MDRX-LUNA-XX: X = 04, 08, 16 (ports). MADRIX Luna 4, 8, 16 port universe Artnet to DMX interface. Supports 16 port 8192, 8 port 4096, 4 port 2048 DMX channels.
- ARTNET-L-X-512: X = 8 (8 Ports), 16 (Ports). 8 or 16 port universe Artnet to DMX interface, 16 port 8192.
- NTG-SWI-XXPT: XX = 8 (8 Ports), 16 (16 Ports). NETGEAR 16-Port gigabit Unmanaged Switch.
- DMX-SPLT-8: DMX Splitter, 1 Input to 8 Output, Ethernet or Hardwire Connection.
Controls
- TVOQ-1-WH: White, ? Touchscreen.
- TVOQ-10-XX-7: XX = BK (Black), WH (White), ? Touchscreen.
- TVOQ-2-BK: Black, ? Touchscreen.
- MDRX-AURA-XX: X = 02, 12, 32 (ports). MADRIX Aura is a stand-alone controller for up to 2, 12, or 32 universes per unit.
Software
Cue™ and CuePro™ softwares are specifically designed for the TivoCUE™ in-wall DMX controls. They include an array of tools required by the latest DMX lighting fixtures, offering intuitive, easy-to-use effects that can be dropped into timelines, and multi-zone synchronization capabilities for effortless project programming.
Compatible Extrusions
MCHAN-8-LP
Low profile NO LENS OPTION clear polycarbonate, length 8'.
? Dimensions: Width 0.69" (17.46mm), Height 0.5" (12.70mm), Depth 0.31" (7.93mm).
TPL-I-45-MCH-8-S
White PVC, 45° NO LENS, length 8'.
? Dimensions: Width 0.875" (22.22mm), Height 0.5" (12.70mm), Depth 0.438" (11.12mm).
DWAR-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.69" (17.52mm), Height 0.94" (23.87mm), Depth 2.81" (71.37mm).
EDGE-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 1.75" (44.45mm), Height 0.75" (19.05mm), Depth 1.81" (46.05mm).
MINI-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.69" (17.52mm), Height 0.28" (7.11mm), Depth 0.5" (12.7mm).
MOFT-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.72" (18.28mm), Height 0.71" (18mm), Depth 0.5" (12.7mm).
DYER-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.71" (18mm), Height 0.91" (23.11mm), Depth 1.18" (29.97mm).
WRNR-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.41" (10.41mm), Height 0.71" (18mm), Depth 0.91" (23.11mm).
NOYS-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 1.81" (45.97mm), Height 1" (25.4mm), Depth 1.03" (26.16mm).
VALN-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.6875" (17.46mm), Height 0.625" (15.87mm), Depth 0.94" (23.87mm).
DOME-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 1.03" (26.16mm), Height 1" (25.4mm), Depth 1.375" (34.92mm).
ALTN-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.78" (19.81mm), Height 0.875" (22.22mm), Depth 0.469" (11.91mm).
MRSL-CHAN-SLV-6.5
Anodized aluminum extrusion available in 6.5' length.
? Dimensions: Width 0.78" (19.81mm), Height 0.75" (19.05mm), Depth 0.625" (15.87mm).
HRIZ-CHAN-SLV-6.5
Anodized aluminum extrusion available in 6.5' length.
? Dimensions: Width 0.78" (19.81mm), Height 0.78" (19.81mm), Depth 0.72" (18.25mm).
ASTR-CHAN-SLV-6.5
Anodized aluminum extrusion available in 6.5' length.
? Dimensions: Width 0.625" (15.87mm), Height 0.875" (22.22mm), Depth 0.625" (15.87mm).
EDIN-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.469" (11.91mm), Height 0.625" (15.87mm), Depth 0.78" (19.81mm).
COTA-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.9" (22.8mm), Height 0.39" (9.9mm), Depth 1.37" (34.78mm).
CARU-CHAN-SLV-6.5
Anodized aluminum extrusion, available in 6.5' lengths.
? Dimensions: Width 0.8" (20.32mm), Height 3.46" (87.88mm), Depth 2.42" (61.46mm).
HAYS-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.55" (13.97mm), Height 0.79" (20mm), Depth 0.79" (20mm).
DUET-04-CHAN-XXX-6.5
XXX = SLV (silver), WHT (white), GLD (gold), BLK (black). Aluminum extrusion, 6.5' Length.
? Dimensions: Width 0.89" (22.6mm), Height 2.47" (62.8mm), Depth 0.79" (20mm).
DUET-04-CHAN-M-6.5
Mud-In PC fire-proof extrusion, 6.5' Length. Note: DUET-04-CHAN-SLV-6.5 and DUET-04-CHAN-M-6.5 are required for mud-in application.
? Dimensions: Width 0.90" (22.8mm), Height 0.5" (12.6mm), Depth 0.79" (20.1mm).
DUET-04-CHAN-SLV-6.5
Anodized aluminum extrusion available in 6.5' length. Note: DUET-04-CHAN-SLV-6.5 and DUET-04-LNS-R-XXX-6.5 are required for recessed application.
? Dimensions: Width 0.73" (18.6mm), Height 0.625" (15.87mm), Depth 1.1" (28mm).
NOVA-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.79" (20mm), Height 0.625" (15.87mm), Depth 0.46" (11.6mm).
MOSR-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.5" (12.70mm), Height 0.82" (20.8mm), Depth 0.75" (19.05mm).
TPL-I-45-MCH-8
White PVC 45° extrusion.
INF-X-LNS-8
X = C (clear), F (frosted) Polycarbonate lens, available in 8' length.
? Dimensions: Width 0.625" (15.87mm), Height 1.18" (30mm).
INF-X-CHAN-8
X = C (clear), F (frosted) Polycarbonate extrusion, available in 8' length.
? Dimensions: Width 0.625" (15.87mm), Height 1.18" (30mm).
FRE-CHAN-SLV-6.5
Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.98" (24.9mm), Height 0.82" (20.82mm), Depth 1.97" (50mm).
RIDG-CHAN-SLV-8
Anodized Aluminum Extrusion, length 8'.
? Dimensions: Width 0.59" (14.99mm), Height 1.81" (46mm), Depth 1.97" (50mm).
ANZI-CHAN-XXX-6.5
XXX=SLV (Silver), BLK (Black), WHT (White). Anodized Aluminum Extrusion, available in 6.5' lengths.
? Dimensions: Width 0.78" (19.81mm), Height 0.625" (15.87mm), Depth 0.78" (19.81mm).
Power Supplies
ADUL - DMX SINGLE ADDRESS
| DESCRIPTION | CAT NO | APPLICATION | PRIMARY VOLTAGE | SECONDARY VOLTAGE | CIRCUIT BREAKERS | MAX LOAD | CIRCUIT CAPACITY |
|---|---|---|---|---|---|---|---|
| ADUL Series Class 2 Transformer | ADUL-120-1-4-24-DIN | Indoor / Outdoor | 100-277V AC 50/60 Hz | 24V DC | 1 ⚡ | 96W | 4A |
| ADUL-240-2-4-24-DIN | 2 ⚡ | 2x96W | 2x4A | ||||
| ADUL-320-3-4-24-DIN | 3 ⚡ | 3x96W | 3x4A |
ADUL - DMX MULTI ADDRESS
| DESCRIPTION | CAT NO | APPLICATION | PRIMARY VOLTAGE | SECONDARY VOLTAGE | CIRCUIT BREAKERS | MAX LOAD | CIRCUIT CAPACITY |
|---|---|---|---|---|---|---|---|
| ADNM Series Class 2 Transformer | ADNM-240-2-4-24-DIN-2 | Indoor / Outdoor | 100-277V AC 50/60 Hz | 24V DC | 2 ⚡ | 2x96W | 2x4A |
| ADNM-320-3-4-24-DIN-3 | 3 ⚡ | 3x96W | 3x4A |
ADNM - DMX/DALI FLICKER-FREE FOR TV STUDIO
| DESCRIPTION | CAT NO | APPLICATION | PRIMARY VOLTAGE | SECONDARY VOLTAGE | CIRCUIT BREAKERS | MAX LOAD | CIRCUIT CAPACITY |
|---|---|---|---|---|---|---|---|
| ADNM Series Class 2 Transformer | ADNM-120-1-4-24-DTV | Indoor / Outdoor | 100-277V AC 50/60 HZ | 24V DC | 1 ⚡ | 1x96W | 1x4A |
| ADNM-240-2-4-24-DTV | 2 ⚡ | 2x96W | 2x4A | ||||
| ADNM-320-3-4-24-DTV | 3 ⚡ | 3x96W | 3x4A |
