24V Magic Linear Bar
Tivoli
Product Overview
The Tivoli 24V Magic Linear Bar is designed for demanding architectural facade, bridge, and media display applications, offering a blend of performance, efficiency, and advanced control.
Key Features
- Designed for architectural facade, bridge, and media display applications
- Low power consumption with efficient power management design
- Standard DMX 512 control protocol (Max. 44 frames/second)
- Amazing resolution with 3 pixels per foot
- Perfect light synchronization with Artnet system and ESD protection ⚡
- Electrical protection for short circuit, over current, over voltage, and over temperature ?
- Dynamic resolution control ranging from the entire fixture length down to 4" segments
- IP67 rated ?️
- Mounting brackets included (2 per fixture)
- 3G Vibration Rated ?️
Dimensions
The fixture has a width of 0.71 inches and a depth of 1.5 inches. The overall length for a standard unit is 39.37 inches. Mounting brackets are included.
Specifications
| Specification | Details |
|---|---|
| Output | Red / Green / Blue / White (4000K) |
| LED Channels | 4 |
| Lumens (lm/ft) | 106 (all colors fully on) |
| Efficacy (lm/W) | 78 |
| Beam Angle | 145° x 105° |
| On-Axis Candela | 44 |
| Pixels | 3 pixels/ft |
| Input Voltage | 24V DC |
| Power Consumption (W/ft) | 3 |
| Maximum Run | 32' |
| Control System | DMX 512 / Artnet |
| Address Setting | Auto |
| Dimensions W/ Bracket | 1.12" W x 2.48" D x 39.37" L |
| Dimensions W/O Bracket | 0.71" W x 1.5" D x 39.37" L |
| Housing | Aluminum Powder Coat - Gray |
| Housing Expansion/Contraction | 0.5cm (0.2") |
| Lens | Opal PMMA Acrylic |
| Mounting | Surface Mount |
| Cooling | Passive ❄️ |
| Cable Entry | Bottom |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Storage Temperature | -40°C to 80°C (-40°F to 176°F) |
| Certification | cETLus, CE, RoHS |
| Environment | Wet Location ? |
| IP Rating | IP67 ?️ |
| Vibration | 3G (ANSI C136.31) ?️ |
Order Specification Guide
Orders are specified using the product code MLB, followed by length and pixel density. Example: MLB-3-3-24 for a 3ft fixture with 3 pixels/foot at 24V DC.
- Product Code: MLB = Magic Linear Bar
- Available Lengths: 1ft, 2ft, 3ft, 4ft
- Pixels per Foot: 3
- Voltage: 24V DC
Note: A layout/drawing must accompany each order showing run length and location.
Photometric Performance & Color Data
The photometric data provides detailed light distribution information. Maximum candela is 66.5, located at a horizontal angle of 90° and a vertical angle of 37.5°.
TM-30 Color Rendering
The TM-30 test results evaluate color rendering capabilities across different hue bins.
| Hue Bin | Rf | Chroma | Hue Shift |
|---|---|---|---|
| 1 | 65 | 15% | 5% |
| 2 | 71 | 14% | -8% |
| 3 | 58 | 7% | -21% |
| 4 | 62 | -8% | -20% |
| 5 | 68 | -17% | -10% |
| 6 | 83 | -6% | 7% |
| 7 | 75 | 1% | 14% |
| 8 | 69 | 9% | 15% |
| 9 | 77 | 14% | 11% |
| 10 | 78 | 10% | -2% |
| 11 | 74 | 8% | -10% |
| 12 | 74 | -1% | -16% |
| 13 | 80 | -7% | -8% |
| 14 | 75 | -8% | 11% |
| 15 | 72 | 8% | 11% |
| 16 | 72 | 9% | 12% |
Additional graphical data includes the Spectral Power Distribution (SPD) graph, Color Vector Graphic, and Color Distortion Graphic, which illustrate the light source's spectral output and color accuracy.
Accessories
A range of accessories are available to complement the Magic Linear Bar:
- MLB-PWR-2P: Power Feed Cable (IP67)
- MLB-JUMPER-M15-4P-X: Jumper Cable (IP67)
- JUMPER-XLR3P-X: Jumper Cable 3-PIN XLR
- DMX3-CAT5-ADPTR: DMX Adapter (3-pin XLR Female to RJ45)
- MLB-TERM-CAP: End Cap for M15 Female Connector
- MLB-T-CONN-3P: T Connector (IP67)
- NTG-SWI-XXPT: NETGEAR Gigabit Unmanaged Switch
- DMX-SPLT-8: DMX Splitter
- ARTNET-L-X-512: Artnet to DMX Interface
- MDRX-LUNA-XX: MADRIX Luna Artnet to DMX Interface
Control Systems & Software Integration
MADRIX Software Levels
MADRIX software offers various license levels (Start, Entry, Basic, Professional, Ultimate, Maximum) that determine the output capabilities for DMX channels, universes, and voxels.
| Level | MADRIX 5 Order Code | DMX Channels | DMX Universes | RGB Voxels | DVI Voxels |
|---|---|---|---|---|---|
| START | MDRX-LC-5S | 1,024 | 2 | 341 | N/A |
| ENTRY | MDRX-LC-5E | 4,096 | 8 | 1,365 | N/A |
| BASIC | MDRX-LC-5B | 16,384 | 32 | 5,461 | N/A |
| PROFESSIONAL | MDRX-LC-5P | 65,536 | 128 | 21,845 | N/A |
| ULTIMATE | MDRX-LC-5U | 262,144 | 512 | 87,381 | N/A |
| MAXIMUM | MDRX-LC-5M | 1,048,576 | 2,048 | 349,525 | N/A |
Control Devices
Various control devices are supported:
- Touchscreen Controllers: TVOQ-10-XX-7 (XX = BK/WH), TVOQ-2-BK
- ARTNET-S-8-512: 8-port universe Artnet to DMX interface for playback and live support.
- MDRX-AURA-XX: MADRIX Aura stand-alone controller for up to 2, 12, or 32 universes.
Power Supplies
Compatible power supplies ensure reliable operation:
ADNM Series - Non Dimming
| Description | CAT NO | Application | Primary Voltage | Secondary Voltage | Circuit Breakers | Max Load | Circuit Capacity |
|---|---|---|---|---|---|---|---|
| ADNM Series Class 2 Transformer | ADNM-90-1-4-24-D | Indoor / Outdoor | 100-277V AC 50/60 HZ | 24V DC | 1 | 90W | 3.75A |
| ADNM-120-1-4-24-D | 1 | 96W | 4A | ||||
| ADNM-240-2-4-24-D | 2 | 2x96W | 2x4A | ||||
| ADNM-320-3-4-24-D | 3 | 3x96W | 3x4A |
INFINITY Series - MLV / ELV / 0-10V / PWM / TRIAC
| Description | CAT NO | Application | Primary Voltage | Secondary Voltage | Circuit Breakers | Max Load | Min Load | Circuit Capacity |
|---|---|---|---|---|---|---|---|---|
| INFINITY Series Class 2 Transformer | INF-J-30-1-1.3-24 | Indoor / Outdoor | 100 - 277V AC | 24V DC | 1 | 30W | 3W | 1.3A |
| INF-J-60-1-2.5-24 | 1 | 60W | 6W | 2.5A | ||||
| INF-J-96-1-4-24 | 1 | 96W | 9W | 4A | ||||
| INF-J-192-2-4-24 | 2 | 2x96W | 2x9W | 2x4A | ||||
| INF-J-288-3-4-24 | 3 | 3x96W | 3x9W | 3x4A |
Wiring Diagrams & Commissioning
Offline Wiring Configurations
Diagrams illustrate standalone wiring setups for media applications using the ARNET-S interface for Artnet-based control, or for preset playback via a MicroSD card with TivoCUE control hardware.
Online Wiring Configuration
The online wiring diagram details a live control setup using MADRIX Live, which requires a network connection for real-time performance manipulation and communication between software and fixtures.
Tivoli Commissioning Service
Tivoli offers a DMX Commissioning service to ensure seamless setup and configuration of lighting and control systems. For more information, contact sales@tivoliusa.com or 714-957-6101 (Engineering Tech Support).
Services include:
- Tivocue Wall Controllers: Remote and Onsite commissioning for TIVOCUE 2 and 10 dmx wall controllers.
- ARTNET-S: Remote and Onsite commissioning for ARTNET-S recorders.
- MADRIX DMX System: Onsite commissioning for MADRIX setups with varying universe counts (2U, 8U, 16U, 24U, 32U).
