TONSTAD Chest of 6 Drawers

Safety Warning

⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints. To further reduce the risk of serious injury and death from tip-overs:

Place heaviest items in the lower drawer.
Do not set TVs or other heavy objects on top of this product.
Never let children climb or hang on drawers, doors, or shelves.

Tools Required

The following tools are recommended for assembly:

Phillips head screwdriver
Flat head screwdriver
Hammer
Drill
Drill bits: Ø 8 mm (5/16"), Ø 3 mm (1/8")

Parts List

Ensure all parts are present before beginning assembly:

Dowels: 3x (Part #101339), 14x (Part #101345)
Cam bolts: 24x (Part #145718)
Cam locks: 24x (Part #119030)
Screws: 10x (Part #151705), 10x (Part #151706), 5x (Part #10040201), 1x (Part #190459), 2x (Part #100823), 2x (Part #109049)
Other components: 24x (Part #153552), 1x (Part #100347), 6x Drawer Slides, 1x Wrench (Part #10127303), 2x Wall Brackets (Part #106989)
Wall mounting hardware: 2x Screws (Part #109567), 2x Wall Plugs (Part #10087223), 4x Washers (Part #100823)

Assembly Steps

Follow these steps carefully to assemble your TONSTAD chest of drawers:

Step 1-3: Attaching Drawer Slides to Side Panels

Attach the drawer slides (6 pieces total) to the inner sides of the main cabinet panels using screws (6x Part #10127303). Ensure correct orientation (L for left, R for right).

Step 4-5: Assembling the Main Frame

Connect the base and top panels to the side panels. Use cam bolts (1x Part #10040201, 5x Part #153552) and secure with cam locks (not explicitly numbered here but implied by the mechanism). Insert dowels (3x Part #101339) into pre-drilled holes and join panels.

Step 6-8: Completing the Cabinet Structure

Continue assembling the main cabinet structure by joining the remaining panels using dowels (14x Part #101345) and cam locks (24x Part #145718, 24x Part #119030). Ensure all connections are secure.

Step 9: Attaching Back Panels

Slide or attach the back panels into the grooves on the rear of the cabinet. Secure if necessary with provided fasteners.

Step 10: Attaching Wall Brackets

Attach the wall mounting brackets (2x Part #109049) to the top rear edge of the cabinet using screws (2x Part #100823).

Step 11-13: Assembling Drawer Boxes

Assemble the individual drawer boxes. Connect the drawer sides, front, back, and base using dowels and cam lock systems. Ensure the drawer slides are correctly attached to the drawer sides.

Step 14-16: Attaching Drawer Fronts

Attach the drawer fronts to the assembled drawer boxes using screws (4x Part #151705, 4x Part #151706). Ensure they are aligned correctly.

Step 17-18: Attaching Feet

Turn the cabinet upright. Attach the leveling feet (5x Part #190459) to the bottom of the cabinet.

Step 19-20: Attaching Drawer Slides to Drawers

Attach the corresponding drawer slides to the sides of the assembled drawers. Ensure they are oriented correctly for smooth operation.

Step 21-22: Inserting Drawers

Carefully slide the assembled drawers into the cabinet, aligning them with the drawer slides mounted on the cabinet frame. You should hear a 'click' when they are properly seated.

Step 23-26: Drawer Assembly Details

Further steps detail the assembly of drawer components and their insertion into the main unit.

Step 27-28: Final Drawer Insertion

Complete the insertion of all drawers. Ensure each drawer slides smoothly and locks into place.

Step 29-32: Final Checks

Confirm all drawers are functioning correctly and the unit is stable.

Wall Mounting Instructions

It is crucial to secure the furniture to the wall to prevent tip-over accidents. Use the provided wall mounting hardware and follow the instructions based on your wall type:

Wall Type A: Solid Wall

Drill a Ø 8 mm (5/16") hole. Insert the wall plug (Part #10087223). Screw the bracket (Part #106989) into the plug using screw (Part #109567).

Wall Type B: Hollow Wall