ITEM NO. :T5304DU-C-N ASSEMBLY INSTRUCTIONS

Assembly Steps

1. Attach the lamp holder (A) to the lampshade (B) using the nut (C) to secure.
2. Drill holes on the wall according to the size of the plastic drywall anchor and gently tap the plastic drywall anchor (D) into the hole. [Visual: A wall section with a plastic anchor labeled 'D' and an upward arrow indicating insertion.]
3. Screw the hook (E) into the plastic drywall anchor. [Visual: A screw hook labeled 'E' with a rotation symbol indicating screwing action.]
4. Wrap the wires around the hook on the 8-shaped fastener (F) and hang the 8-shaped fastener (F) to the hook (E). [Visual: Wires being wrapped around fastener 'F', which is then hung on hook 'E'.]
5. Screw the bulb (G) into the lamp holder. [Visual: A bulb labeled 'G' being screwed into the lamp holder labeled 'A'.]
6. Screw the lampshade (H) into the lamp holder gently. [Visual: The lampshade labeled 'H' being attached to the lamp holder assembly.]

Please consult a qualified Electrician if you are not familiar with electrical wiring. ?

Product Specifications and Components

Item Number: T5304DU-C-N

Bulb Requirements:

• Type: E26-LED ONLY
• Maximum Wattage: 20W
• Maximum Dimensions: 1.46 inches Wide x 4.4 inches High. [Visual: A diagram of a bulb with width and height dimensions marked.]

Included Components:

• Lamp Holder (A)
• Lampshade (B)
• Nut (C)
• Bulb (G)
• Lampshade component/ring (H)
• Power cord with integrated ON/OFF switch and plug. [Visual: An ON/OFF switch and a two-pin power plug.]

Mounting Hardware:

• Plastic Drywall Anchors (D) [Visual: Three anchors.]
• Screw Hooks (E) [Visual: Three hooks.]
• 8-Shaped Wire Fasteners (F) [Visual: Three fasteners.]

Assembly Diagram Overview: The visual guide demonstrates the installation process. It shows how to prepare the wall by inserting a drywall anchor (D) and then screwing in a hook (E). The lamp's electrical cord is secured to the hook (E) using an 8-shaped fastener (F). The main lamp structure, comprising the lampshade (B), nut (C), and lamp holder (A) with bulb (G) and component (H), is then connected. The power cord includes an ON/OFF switch and a plug for connection to an electrical outlet.