Diodes LSC04065FW Silicon Carbide Schottky Diode

Overview

Features

• Positive temperature coefficient for safe operation and easy paralleling
• 175°C maximum operating junction temperature
• Essentially no reverse or forward recovery
• Extremely fast switching not dependent on temperature
• Qualification according to AEC-Q101 Rev_D
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. "Green" Device (Note 3)
• For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact Diodes Incorporated or your local Diodes representative. https://www.diodes.com/quality/product-definitions/

Application

• Switch mode power supplies
• Power factor correction
• Power factor correction modules

Mechanical Data

• Package: JEDEC TO-220ACFP
• Package Material: "Green" molding compound, UL flammability classification 94V-0, "Halogen-free".
• Lead free finish, RoHS compliant
• Weight: 1.497 grams (Approximate)
• Marking code: LSC04065FW

Ratings and Electrical Characteristics

Ratings at 25°C ambient temperature unless otherwise specified.

Absolute Ratings

Static Electrical Characteristics

Dynamic Electrical Characteristics

Thermal Characteristics

Notes

1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
4. 300µs pulse width, 2% duty cycle.
5. Measured at 1.0MHz and applied voltage of 1.0V DC.
6. Thermal resistance test performed in accordance with JESD-51.
7. The unit mounted on Aluminum fin-type Heatsink 24mm x 42 mm x 24mm.

Rating and Characteristic Curves

Figure 1: Forward Current Derating Curve

This graph shows the Average Forward Current (A) on the y-axis versus Case Temperature (°C) on the x-axis. It illustrates how the maximum allowable forward current decreases as the case temperature increases.

Figure 2: Non-Repetitive Peak Surge Forward Current

This graph displays Peak Forward Surge Current (A) on the y-axis against Pulse Duration (tp) (mS) on the x-axis. It shows the maximum surge current capability for half sine-wave pulses at different temperatures (T_J=25°C and T_J=125°C).

Figure 3: Typical Forward Characteristics

This graph plots Instantaneous Forward Current (A) on the y-axis against Instantaneous Forward Voltage (V) on the x-axis. Multiple curves represent typical characteristics at different junction temperatures (T_J = -55°C, 25°C, 100°C, 125°C, 150°C, 175°C).

Figure 4: Typical Junction Capacitance

This graph shows Capacitance (pF) on the y-axis versus Reverse Voltage (V) on the x-axis. The curve represents typical junction capacitance measured at T_J=25°C, f=1MHz, and a voltage level of 1V.

Figure 5: Typical Reverse Characteristics

This graph plots Instantaneous Reverse Current (µA) on the y-axis against Rated Peak Reverse Voltage (V) on the x-axis. Multiple curves illustrate typical reverse characteristics at various junction temperatures (T_J = 25°C, 125°C, 150°C, 175°C).

Figure 6: Typical Capacitive Charges

This graph displays Total Capacitive Charge (nC) on the y-axis versus Reverse Voltage (V) on the x-axis. It shows the typical capacitive charge values.

Ordering and Marking Information

Ordering Information

Marking Information

The device marking includes a LOGO, LT YXWW, Terminal sign, and the product code LSC04065FW. The marking codes are defined as follows: Y=Year Code, X=1.2.T.R.3... Manufacturer's Internal Code, X=A.B.V.K.C... Green Compound Code, WW=Week Code, and Product Type Marking Code.

Packaging Information

1. TUBE: Diagram shows a long, rectangular tube with dimensions labeled A, B, and C.

2. AIR BAG: Diagram shows a rectangular bag with circular perforations, labeled with dimensions A and B.

3. INNERBOX: Diagram shows a rectangular box with dashed lines indicating depth, labeled with dimensions A, B, and C.

4. CARTON: Diagram shows a larger rectangular box, labeled with dimensions A, B, and C.

Packaging Details

Important Notice

1. DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

2. The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes' products described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes' products. Diodes' products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for (a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes' products for their intended applications, (c) ensuring their applications, which incorporate Diodes' products, comply the applicable legal and regulatory requirements as well as safety and functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their applications.

3. Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such use, and will hold Diodes and all companies whose products are represented herein or on Diodes' websites, harmless against all damages and liabilities.

4. Products described herein may be covered by one or more United States, international or foreign patents and pending patent applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties (including third parties whose products and services may be described in this document or on Diodes' website) under this document.

5. Diodes' products are provided subject to Diodes' Standard Terms and Conditions of Sale (https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

6. Diodes' products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is prohibited under any applicable laws and regulations. Should customers or users use Diodes' products in contravention of any applicable laws or regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with the applicable laws and regulations, as well as any unintended or unauthorized application.

7. While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes.

8. Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such unauthorized use.

9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-and-conditions/important-notice.

The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries. All other trademarks are the property of their respective owners. © 2025 Diodes Incorporated. All Rights Reserved.