ATORCH S1BWT WiFi Intelligent Temperature Controller
Key Features & Overview
The ATORCH S1BWT is a WiFi networking curve electric measurement version super intelligent temperature controller. It offers multiple safety protections, including automatic power-off for low-voltage, over-voltage, over-current, and thermal faults.
Key features include:
- New temperature and electrical measurement hyperbolic display on the main screen.
- Added historical electricity bar chart, standby display calendar, and screen shutdown.
- New power-off travel calendar and peak value recording for electrical measurements.
- New temperature control fault six-fold alarm.
- New independent 18-bit ADC sampling temperature measurement chip.
- Mobile APP networking for remote control and testing with unlimited distance.
- Intelligent temperature control measurement with four operating modes: Heating, Cooling, Normally ON, and Normally OFF.
Connectivity options include Bluetooth distribution network, WiFi networking, and Bluetooth data transmission. ? ?
Operating Modes
The device supports four primary operating modes:
- Heating Mode: Automatically turns on power when the temperature is below the set heating start temperature and turns off when it reaches the heating stop temperature.
- Cooling Mode: Automatically turns on cooling when the temperature is above the set cooling start temperature and turns off when it reaches the cooling stop temperature.
- Normally ON: The device remains powered on.
- Normally OFF: The device remains powered off.
Mobile APP Control
The ATORCH S1BWT can be controlled remotely via the Smart Life app. This allows for:
- Remote control and testing from anywhere.
- Functional control, temperature data detection, and statistics.
- Daily, monthly, and annual power consumption monitoring.
- Setting schedules for automatic operation (e.g., start heating at 9 AM).
- Parameter adjustments including Over-Voltage Protection (OVP), Under-Voltage Protection (LVP), Over-Current Protection (OCP), Over-Power Protection (OPP), and temperature units (°C/°F).
- Setting fault alarm thresholds and notification services (SMS, phone calls).
The app supports managing multiple devices simultaneously.
Display Interfaces & Data Visualization
The device offers multiple display interfaces, switchable via buttons:
- Large font display interface.
- Over-voltage, power protection, temperature fault interface.
- Heating/cooling interface.
- Electricity price setting/billing interface.
- Current voltage curve interface.
- Temperature curve interface.
- Switch (ON/OFF) interface.
- Daily, Monthly, and Annual Energy Record Interface.
The device also displays real-time voltage, current, power, and energy consumption data. It supports curve display for voltage, current, and temperature (in Celsius and Fahrenheit), with peak value recording for both current session and entire process.
Safety and Alarm Functions
The ATORCH S1BWT prioritizes safety with several alarm and protection mechanisms:
- Double Alarm, Quadruple Power OFF: Protects against over-voltage, over-current, over-power, and low-voltage conditions with audible and visual alerts, followed by automatic power-off.
- Fault Alarm: Alerts for abnormal temperature, damaged probes, short circuits, or relay issues.
- Alarm Types: Includes full-screen display alarms, buzzer sounds, APP notifications, preset SMS, and preset telephone alarms.
- Parameter Settings: Users can configure protection thresholds like OVP (e.g., 265.0V), LVP (e.g., 75.0V), OCP (e.g., 16.00A), and OPP (e.g., 3600W).
Connectivity and Upgrades
- WiFi Networking: Connects to your home WiFi for remote control via the Smart Life app.
- Bluetooth: Used for initial setup and local communication.
- Firmware Updates: Supports lifetime free firmware updates via WiFi (OTA) and PC connection, ensuring the device stays optimized with new features.
Electricity Fee Calculation
The device supports three electricity fee calculation modes to manage costs:
- Single Rate Price: Calculates bills based on a single tariff.
- Ladder Price: Applies different rates based on consumption tiers (e.g., >200kWh:1.00, >1000kWh:1.50).
- Peak Valley Price: Allows setting 4 levels of peak and valley electricity prices for time-of-use billing.
Temperature Probes
The controller is compatible with two types of temperature probes:
- Waterproof Temperature Probe: Suitable for wet environments.
- Magnetic Metal Temperature Probes: Designed for attachment to metal surfaces like radiators or boilers.
Both probe types are typically 3 meters in length.
Product Specifications
Brand/Model/Version: ATORCH/S1BWT/WiFi version
Product Name: WiFi networking hyperbolic intelligent temperature controller
Input Voltage: AC85-265V 50/60Hz
Power Range: AC85-265V 50/60Hz
Maximum Current: 0~16A
Measurement Accuracy: ±1%
Temperature Measurement Range: -20°C to +120°C
Bluetooth Connection: Supports Android only (contact customer service for software).
Power Off Memory: Supported.
Firmware Update: WiFi Networking Upgrade.
Calendar/Time: Synchronized from network data.
Mobile Remote: WiFi Remote Operation.
Product Size: Approximately 75.5mm (width) x 133mm (height) x 29.5mm (depth).
Product Versions
Available in two main versions:
- Waterproof Probe Version: Includes a 3m waterproof temperature probe.
- Magnetic Metal Probe Version: Includes a 3m metal magnetic temperature probe.
Both versions typically feature an EU plug.
