S1 Electricity Measure Smart Control Programmable Socket

Product Type and Attributes

This product is available in Bluetooth and smart Wi-Fi versions. Please check the user manual and purchase details. This user manual is suitable for various socket types including CN Plug, US Plug, EU Plug, UK Plug, FR Plug, AU Plug, and others.

Key Operation Method and Interface Introduction

Interface Elements:

• Function title bar: Displays the current function or status.
• Various measurement parameters: Shows Vol (Voltage), Cur (Current), Pwr (Power), Ene (Energy), Fre (Frequency), Factor (Power Factor), PM2.5, Humidity, and Air Temperature.
• Time and online icon: Displays running time when not connected to the internet, or the calendar when connected.
• Power supply indicator: A light that indicates normal power supply.
• Output socket interface: Indicates compatibility with CN/EU/UK/US/FR/AU plug options.
• Buttons:
  • Button (+/-): Short press to switch modes or adjust values. Long press to continuously increase/decrease values or switch interfaces.
  • Button (M): Short press to switch measurement parameters or switch menu items. Long press to enter/exit background settings.

Display Bar Elements:

• Multifunctional display bar: Shows Temperature display (internal temperature when offline, network temperature when online).
• Bluetooth indicator: Illuminates when the Bluetooth version is connected. Not present on the Wi-Fi version.

Interface Operation:

Function Interface Switching and Measurement Interface Value Setting:

Turn on the power. Long press the "+" or "-" button to cycle through different display interfaces. Long press the "M" key to enter the system background settings. On the front-end interface, short press "M" to make a number flash, then use "+/-" to adjust the value. Short press "M" again to switch digits. Long press "M" to save settings immediately. Short press "+/-" to switch between "normally open", "normally closed", and "auto" modes.

Background Setting Interface:

Long press "M" to enter the background interface. Short press "M" to cycle through menus (indicated by color change). Use "+/-" to adjust values. Long press "M" to exit background settings and return to the foreground interface.

Use Settings

Long press the "M" button to enter the background setting interface. Short press "M" to switch setting columns. When a number flashes, short press "+/-" to adjust it. Long press "+/-" to confirm or cancel the adjustment.

Menu Navigation:

• Short press "+": Increment value / Select current column.
• Long press "+": Continuous increment / Confirm selection.
• Short press "-": Decrement value / Select current column.
• Long press "-": Continuous decrement / Cancel selection.
• Short press "M": Switch setting column / Select menu item.
• Long press "M": Enter/Exit background settings.

Menu Options (Example):

ATORCH AT4PBW Menu Vx.x.x:

• 01. Language: Chinese / English
• 02. Display Brightness: (e.g., 9)
• 03. Standby Brightness: (e.g., 3)
• 04. Enter Standby time: (e.g., 60S)
• 05. Key Beep: ON/OFF
• 06. Price: (e.g., 0001.00)
• 07. Over-Voltage: (e.g., 265.0V)
• 08. Over-Current: (e.g., 025.0A)
• 09. Over-Power: (e.g., 7000W)
• 10. Switching Model: Controlled
• 11. Data Zero
• 12. Wi-Fi Device Reset (Not Have)
• 13. System All Default Setting
• 15. Screen rotation

Notes on Settings:

1. Overvoltage, Overcurrent, Undervoltage Protection: Setting thresholds trigger alarms and can turn off output.
2. Standby Screen: If set to simple measurement, it enters a large number display mode after the standby time is reached.
3. Clear Accumulated Data: Press "+" in this column, then "OK" appears to clear electricity bill data.
4. Wi-Fi Settings Reset: Use to reconfigure network if Wi-Fi account/password changes.
5. Restore Factory Settings: Short press "M" to this column, then long press "+" for 3 seconds to reset the system.

Bluetooth Connection or Wi-Fi Connection Steps

Wi-Fi Version:

1. Download the "Smart Life" APP or "Tuya APP" by scanning the QR code on the device or from your app store.
2. Follow the on-screen instructions in the app to connect to the internet.

Bluetooth Version:

1. Search for "E_test" in the Apple App Store or scan the Android QR code to download and install the app.
2. Open the app and tap the Bluetooth icon in the upper left corner.
3. Select the "S1B-BLE" model from the list to automatically return to the app's main interface.
4. The Bluetooth icon on the device will change from gray to blue, and a beeping sound will confirm a successful connection. Data will then be transmitted synchronously.

Warning: If the "S1B-BLE" model does not appear, ensure your mobile phone's settings allow storage and location permissions for the app. Re-open the app after enabling these permissions.

Electrical Parameters

Setting Method and Application of Safety Protection Function

General Safety Protection Settings:

Long press the "+" key to access the security protection page. Short press "M" to select the voltage digits for overvoltage automatic power-off. Use "+/-" to adjust. Continue pressing "M" to adjust tens digits, then over-current, and over-power values. Long press "M" to save or wait for automatic save. The set protection thresholds can be increased by 5-10% for normal use and protection. If thresholds are exceeded, the system cuts power, prompts with a horn, and displays an alarm. The device remains off until a key signal or remote control is received, then returns to the protection interface in an off state, awaiting reset or restart.

Smart Power-Off for Charging (Category A):

Long press "+" to go to the "smart power-off category A" page and select "on". Record the charging power value when the device is fully charged. Add 2-5W to this value for the automatic power-off setting. Enable the "auto" gear. When the system detects that the current power value is less than the set value and continues for the set duration, it displays a power-off icon and cuts power, protecting your device. A longer duration setting ensures fuller charging while maintaining monitoring for safe power-off.

Viewing Progress Bar and Countdown:

When the measured power is less than the set value, a countdown begins, and a progress bar appears. The bar decreases and changes color from yellow to red. If the measured power exceeds the set value, the countdown clears, the progress bar fills instantly, and a new detection round starts.

Smart Power-Off to Prevent Unattended Devices (Category B):

Long press "+" to go to the "smart power-off type B" page and select "on". Record the minimum power value of the connected device when it is powered on. Subtract 5-25W from this value for the setting. Enable the "auto" gear. If the system detects the current power value is greater than the set value, it assumes the device is in use. It then starts a countdown based on the set duration. If the system determines you may have forgotten to turn off the device, it automatically cuts power, preventing energy waste.

Timing Power Supply and Cyclic Timer Switch

Timing Power Supply for Charging Devices:

Long press "+" to access the timing power supply page. Set the expected full charge time for your device. Press "+" again to enter automatic mode. The system powers on and counts down to the set time, then automatically cuts off power with an audible beep and a red interface display.

Cyclic Timer Switch:

This feature can be used for intermittent oxygenation in fish ponds, providing a natural wind-like atmosphere with electric fans, saving electricity bills with exhaust fans, or controlling other devices requiring intermittent power. The opening or closing times can be set as needed. This allows for power saving and cost reduction when devices do not need to run continuously.

Difference Between Timing Switches:

• Timing Power Supply: Power is disconnected after the user-set countdown ends.
• Cycle Timing Switch: Provides automatic cycle power supply (on-off-on) based on user-defined switch durations.
• Countdown Switch: Power is turned on for a user-defined duration and then turned off.

Electrical Energy Monitoring and App Information

The electrical energy monitoring page on the product homepage is designed for measuring and statistics of electrical energy and parameters for various appliances. The product can calculate electricity bills, display current voltage, current, power, and other values. It also offers 24-hour safety protection against overvoltage and overcurrent. It can monitor power consumption for home appliances like refrigerators, washing machines, and induction cookers.

APP Software and Download Address:

Visit: http://www.atorch.cn for more details and app downloads.

Safety Warning:

This product uses strong electricity. Do not touch metal parts with electricity during use. Ensure safety.

APP Interface and Operation

The "Smart Life" or "Tuya" app allows for device management and control.

Connecting a Device (Wi-Fi):

1. Download and install the "Smart Life" app.
2. Ensure your phone is connected to a stable Wi-Fi network.
3. Open the app and tap "Add Device".
4. The device should enter Wi-Fi pairing mode (Wi-Fi LED flashes).
5. Select your Wi-Fi network and enter the password.
6. The app will discover and add the device.

Device Control Interface:

The app interface typically displays:

• Current Temperature (°C/°F)
• Switch status (ON/OFF)
• Socket status (Hot/Colding)
• Heating Mode Settings: Heating Start Temp, Heating Stop Temp.
• Cooling Mode Settings: Cooling Start Temp, Cooling Stop Temp. (Note: Stop temperature must be at least one degree lower/higher than start temperature as applicable).
• Current Voltage, Current, Power, and Total Energy (kWh).
• Timing Settings: Options for switching mode timing, heating mode timing, and cooling mode timing.
• Parameter Settings: Includes Price, Over-Voltage Protection (OVP), Over-Current Protection (OCP), Over-Power Protection (OPP), Temperature Calibration, and Temperature Unit Conversion (°C/°F).
• Temperature Log: Records temperature history over Day, Month, Year.
• Diagram Curve: Visual representation of temperature or other parameters over time.

The app allows remote ON/OFF control and setting of various parameters and timers.