Dasqua Digital Gauge Instruction Manual

Use Steps

1. Before use, please make sure that the battery is installed.
2. Press the ON/SET OFF button to check whether the measuring tool works normally.
3. Release the locking state anticlockwise (↺) and close the measuring head with appropriate force. After the measuring head contacts in place, press the ON/ZERO OFF button to reset (for C type, press the ON/SET OFF button to reset). After setting, the measurement can be used.

Product Characteristics

• Relative capacitance measurement system.
• Automatic power-off function (product powers off automatically after approximately 5 minutes of inactivity).
• Type A / B gauges are suitable for measuring the thickness of various plates. Type C gauges are suitable for measuring inner diameters, etc.
• Uses a CR2032 lithium battery with a lifespan of over 1 year.
• Working environment requirements: 0-40 °C, ≤ 80% RH.
• Storage environment requirements: -10-60 °C, ≤ 80% RH.
• When the battery voltage is too low, the screen displays "B" to remind the user to replace the battery.

Product Figure and Buttons

The document illustrates different types of digital gauges: Type A, Type B with Handle, Type C, and Type C with Handle. Key components and buttons are identified as:

• 1. LCD: Displays measured values.
• 2. mm/in/F button: Short press to switch between metric (mm) and inch (in) measurement modes. 'F' indicates fraction mode.
• 3. ON/ZERO OFF button: Short press to turn the device on or set the zero point. Long press to turn the device off.
• 4. HOLD button: Short press to lock or unlock the currently displayed measurement value.
• 5. ON/SET OFF button: Short press to start measurement or reset the initial value. Long press to turn the device off.
• 6. Battery cap: Allows for battery replacement.
• 7. Locking screw: Turn clockwise (↻) to lock the current position; turn anticlockwise (↺) to release it.
• 8. Measuring Head: The part that contacts the object being measured.
• 9. Wrench: A tool possibly included for adjustments or maintenance.
• 10. Handle: Provides grip for certain models.

Detailed diagrams show the physical arrangement of these parts on the various gauge types.

Specifications

Caution

While you own a high-quality product, appropriate attention is necessary, as with any electronic product:

1. This data display instrument is a precise measuring tool. Avoid contact with liquids, exposure to direct sunlight, disassembly, or impact.
2. Regarding the battery: Do not force charging or attempt to burn it. Dispose of old batteries according to local laws and regulations.
3. To ensure the measuring tool remains in good condition for a long time, clean off any oil contamination or liquid with a soft cloth after use.
4. To protect the metal components, apply some anti-rust oil to the metal surfaces.