Zumtobel PANOS R LED Downlight
This document provides installation and operation instructions for the Zumtobel PANOS R series of LED downlights, including models R100, R150, and R200.
General Safety and Installation Guidelines
Important: Installation and commissioning, as well as any modifications, must only be performed by authorized personnel (qualified electrician). The manufacturer is not liable for damages resulting from improper installation, operation, or unauthorized modifications.
The luminaire is intended for lighting purposes only and must be installed in accordance with national regulations.
Electrical Safety: Disconnect mains cables and DALI control lines before any maintenance or assembly work. Ensure power is off. Hot plug-in is prohibited and may damage the luminaire or void the warranty.
Interruption of the neutral conductor during operation can cause overvoltage damage. Ensure neutral disconnect terminals are opened only when voltage-free and closed before power is switched back on.
The light source shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.
Installation Notes:
- The luminaire is not suitable for covering with thermally insulating material.
- The IP43 protection rating is valid only when installed in an enclosed ceiling and applies only to the room-facing side.
- Commissioning should occur after the construction phase when mains voltage is continuously present.
- Dispose of packaging and luminaire in accordance with applicable regional regulations.
- Keep these instructions for future reference.
Product Specifications and Dimensions
The PANOS R series includes models R100, R150, and R200, available in different versions (e.g., L, H, SWI/LDO). Detailed dimensions (X, Y, H, D, T) and cut-out dimensions (ØA, ØB, ØA1, ØA2) are provided for each model. Refer to the diagrams for specific measurements.
Example Dimensions for PANOS R R100:
| Model | X (mm) | Y (mm) | H (mm) | D (mm) | T (mm) |
|---|---|---|---|---|---|
| R100 L | Ø100 | Ø165 | 80 | 1-40 | * |
| R100 H | Ø100 | Ø165 | 104 | 1-40 | * |
Cut-out Dimensions:
| Model | ØA | ØB | ØA1 | ØA2 |
|---|---|---|---|---|
| PANOS 3 RET R100 105-145 | 100 | 165 | 165 | |
| PANOS 3 RET R150 155-195 | 150 | 220 | 215 | |
| PANOS 3 RET R200 205-250 | 200 | 270 | 270 |
Mounting Instructions
Detailed step-by-step diagrams illustrate the mounting process, including:
- Preparing the ceiling cut-out.
- Installing the luminaire body.
- Connecting the wiring (SWI, LDO, DIM, DALI).
- Securing the luminaire.
Specific instructions are provided for different connection types:
- SWI/LDO: Standard wiring and looping-in (feed-through) instructions are shown, including cable diameter and maximum current ratings.
- SWI DIM: Instructions for dimmable versions, including DALI connections.
- LDO: Instructions for looping-in and DALI connections.
- 9TW: Wiring instructions for the 9TW module.
- BC: Wiring instructions for the BC module.
Diagrams show the correct way to connect wires, including conductor cross-sections (e.g., 0.75-1.5 mm²) and cable entry diameters (e.g., Ø 4.5-9 mm).
Optional Features and Accessories
- Emergency Lighting: Information regarding optional emergency lighting modules according to EN 60598-2-22 is provided.
- Tridonic basic DIM Wireless ControlApp: Instructions for downloading and using the app for Bluetooth-controlled downlights are included, along with QR codes for app download and documentation.
Maintenance
Reflector Cleaning: Instructions for cleaning the reflector are provided, along with a recommendation for a reflector cleaning cloth.
Dismantling
Step-by-step diagrams illustrate the process for dismantling the luminaire.
Contact Information
For questions or further information, please contact Zumtobel. The manufacturer's address and contact details are provided.
Innovative LED lighting solutions and lighting management - Zumtobel
