HULALA Home Z6SFXW0524 Sectional Sofa
Thank you for purchasing the Sectional sofa. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At HULALA home, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great designs to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have.
Parts List
Carton A
- A: Seat Cushion (x 2)
- B: Seat Frame (x 2)
- C: Seat Panel (x 2)
- D: Support Bar (x 8)
- E: Back Frame (x 2)
- F: Back Cushion (x 2)
- G: Wood Leg (x 8)
Carton B
- J: Console (x 1)
Carton C
- H: Left Armrest (x 1)
- I: Right Armrest (x 1)
Hardware List
Carton A
- 1: Metal Hook (x 4)
- 2: Connecting Plate (x 2)
- 3: Plastic Clip (x 4)
- 4: Bolt M6*20mm (x 12+1)
- 5: Plastic Washer (x 8+1)
- 6: Allen Key (x 1)
Carton B
- 1: Metal Hook (x 4)
- 4: Bolt M6*20mm (x 8+1)
- 6: Allen Key (x 1)
Carton C
- 1: Metal Hook (x 4)
- 4: Bolt M6*20mm (x 8+1)
- 6: Allen Key (x 1)
Assembly Instructions
STEP 1
Unpack [Carton A]. Lay out all components: Seat Cushions (A x 2), Seat Frames (B x 2), Seat Panels (C x 2), Support Bars (D x 8), Back Frames (E x 2), Back Cushions (F x 2), Wood Legs (G x 8), and hardware including Metal Hooks (1 x 4), Connecting Plates (2 x 2), Plastic Clips (3 x 4), Bolts M6*20mm (4 x 12+1), Plastic Washers (5 x 8+1), and Allen Key (6 x 1).
STEP 2
Unpack Seat Cushions (A) and Back Cushions (F). ✂️ Cut here to open packaging. ℹ️ NOTE: Allow 48 hours for cushions to fully expand after unpacking.
The diagram shows cushions being removed from packaging, with a note about expansion time.
STEP 3
Attach Wood Legs (G x 8) to the bottom of the Seat Frames (B x 2) using Plastic Washers (5 x 8). The diagram shows four legs per frame, secured with washers.
Close-up views show the leg being screwed into the frame with a washer.
STEP 4
Attach Support Bars (D x 8) to the inside of the Seat Frames (B x 2). The diagram shows two bars per frame, attached near the top edge.
Close-up views show the support bar being screwed into the frame.
STEP 5
Attach Metal Hooks (1 x 4) and Bolts (4 x 8) to the Back Frames (E x 2). The diagram shows two hooks and four bolts per frame, positioned along the bottom edge of the back frame.
Close-up views show the hook and bolt assembly.
STEP 6
Attach the Back Frames (E x 2) to the Seat Frames (B x 2). The diagram shows the back frames slotting into the rear of the seat frames. ℹ️ NOTE: Keep the side of the backrest flush with the side of the seat frame.
Close-up views show the connection points.
STEP 7
Connect the assembled Seat Frame and Back Frame units. Attach Connecting Plates (2 x 2) to the rear of the units using Bolts (4 x 4). The diagram shows two plates connecting two units together.
Close-up views show the connecting plate and bolt assembly.
STEP 8
Prepare the Seat Panels (C x 2). The diagram shows two seat panels, ready to be placed.
STEP 9
Unpack [Carton C]. Lay out Left Armrest (H x 1), Right Armrest (I x 1), and hardware including Metal Hooks (1 x 4), Bolts M6*20mm (4 x 8), and Allen Key (6 x 1).
STEP 10
Attach Metal Hooks (1 x 4) and Bolts (4 x 8) to the Armrests (H and I). The diagram shows two hooks and four bolts per armrest.
Close-up views show the hook and bolt assembly.
STEP 11
Attach the Armrests (H and I) to the assembled Seat/Back Frame units (B and E). The diagram shows the armrests slotting into place.
Close-up views show the connection points between armrests and the seat/back frames.
STEP 12
Assemble multiple units together to form the base of the sofa. The diagram shows several seat/back frame modules being joined, with armrests attached to the ends.
Arrows indicate the direction of connection.
STEP 13
Attach Plastic Clips (3 x 4) to the underside of the assembled sofa base units. The diagram shows clips being pressed into designated slots.
Close-up views show the plastic clip being inserted.
STEP 14
Place the Seat Panels (C x 2) onto the assembled sofa base. The diagram shows the panels being lowered into place over the frame.
Close-up views show the panel resting on the frame.
STEP 15
Place the Seat Cushions (A x 2) onto the assembled sofa base. The diagram shows the cushions being lowered into place.
STEP 16
Place the Back Cushions (F x 2) onto the assembled sofa. The diagram shows the cushions being lowered into place.
STEP 17
Unpack [Carton B]. Lay out the Console (J x 1) and hardware including Metal Hooks (1 x 4), Bolts M6*20mm (4 x 8), and Allen Key (6 x 1).
STEP 18
Attach Metal Hooks (1 x 4) and Bolts (4 x 8) to the Console unit (J). The diagram shows two hooks and four bolts per side of the console.
Close-up views show the hook and bolt assembly.
STEP 19
Insert the Console unit (J) into the assembled sofa structure, between the Seat/Back Frames (B and E) and Armrests (H and I). The diagram shows the console sliding into position.
Close-up views show the connection points for the console.
STEP 20
Place the Seat Panels (C x 2) over the Console area. The diagram shows the panels being lowered into place.
STEP 21
Place the Seat Cushions (A x 2) onto the assembled sofa, over the Console area. The diagram shows the cushions being lowered into place.
STEP 22
The final assembled sofa is shown. This configuration uses 1*Carton A + 1*Carton B.
Configuration Options
Option 1
A straight sofa configuration. Requires 2*Carton A + 1*Carton C.
The diagram shows a long, straight sectional sofa.
Option 2
A sectional sofa with a console and one armrest. Requires 2*Carton A + 1*Carton B + 1*Carton C.
The diagram shows a sectional sofa with a central console unit.
Option 3
A corner sectional sofa with a console and chaise. Requires 3*Carton A + 1*Carton B + 1*Carton C.
The diagram shows an L-shaped sectional sofa with a chaise lounge section.
Option 4
A large sectional sofa with a console and additional seating. Requires 4*Carton A + 2*Carton B + 1*Carton C.
The diagram shows a spacious sectional sofa arrangement.
Maintenance and Warning
- ⚠️ Keep furniture away from heat.
- Do not clean furniture with harsh cleansers or polish. Do not use detergents, solvents, abrasives, spray packs, or leather cleaner. Use non-colored mild soap with warm water for cleaning spills (Mix 1:10 soap to water).
- Do not place furniture under direct sunlight, as material may fade over time.
- Do not use on-site dry cleaning machines.
- Children should not climb or jump on the furniture.
- Do not write on furniture without a padded barrier to protect the surface.
- Not for commercial use; for residential use only.
- The maximum load is 330 LBS of each seat.
Warranty
HULALA home strives to offer high-quality products and aims to satisfy each customer with product or service as needed. A 30-day warranty is provided starting from the time the item is received. Each customer must provide a record of their order, such as the order number or item receipt, for any items outside the warranty period. Replacement parts may still be available for purchase from the company if they are available.
Are you having difficulty with assembly? Missing parts? Please send an email with your order number to customerservice@hulalahome.com.
For returns, please check the return policy with the retailer or marketplace where you bought the product. We appreciate your purchase from us. Pop up your life with our furniture piece!
