Contact Information
Contact Us:
If you have any questions about the installation of YITAHOME products, please e-mail us at after-sale.cs@hotmail.com.
Alternative contact method (for amazon.co.uk orders only):
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
Important Installation Notes
Once installed, the product cannot be detached. Strictly follow each step in the installation manual.
- Gather and organize all required parts prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Two or more people are needed for the assembly.
- Align the holes before assembly and snap into place with a slight tap.
- Please prepare a rubber mallet in advance for convenient installation.
- The product's structure prevents it from being conveniently assembled in low temperatures, so do not intentionally install at low temperatures.
- During installation, please refer to the accessories guides to ensure that they are installed in the correct directions.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Large, solid panel, likely a side or base. | X2 |
| B | Panel with a series of interlocking grooves along one edge. | X1 |
| C | Large, solid panel, similar to A. | X2 |
| D | Long, slender rod or support bar. | X3 |
| E | Metal bracket with multiple holes, possibly for connecting panels or supports. | X3 |
| G | L-shaped metal bracket. | X1 |
| H | Metal rod with a hinge mechanism, likely for the lid support. | X1 |
| I | Metal bracket, similar to E but with a different shape. | X2 |
| J | Slatted panel, possibly a base or lid component. | X1 |
| L | Standard screw. | X39 |
| T | Metal plate with several holes for fastening. | X7 |
Assembly Instructions
Step 1
Connect panel D to panel J using screws (L) and fastening plates (T). Arrows indicate the insertion points.
Step 2
Attach brackets (E) and an L-shaped bracket (G) to panel J. Part E should tilt to one side, then to the other, for easier installation.
Step 3
Attach panel B to panel A. Arrows show the alignment and insertion points. Use a rubber mallet to tap the connection into place (indicated by 'CLICK!').
Step 4
Attach panel C to panel A. Parts D are used as supports or connectors. A rubber mallet is indicated for assembly.
Step 5
Attach panel D to panel C. Arrows indicate the connection points.
Step 6
Place connectors (T) and screws (L) to secure various parts of the structure.
Step 7
Attach the hinged rod (H) to the main body of the deck box and then to the lid, using screws (L) for fastening. Multiple close-ups show the connection points.
Step 8
The assembly is now complete. The YITAHOME Deck Box is ready for use.
Installation Status: Installation Completed / Installation Abgeschlossen / Installation Complétée / Installazione Completata / Instalación Completada
