YITAHOME TZSKHS-V1 Storage Shed Assembly Instructions
Model: TZSKHS-V1 | Part Number: FTPLDB-3015
Contact Information
For any questions regarding the installation of YITAHOME products, please contact YITAHOME at:
- Phone: +1 (888) 717-8084 (Monday-Friday: 8:00 AM - 4:30 PM PST / Saturday: 8:00 AM - 12:00 PM PST)
- Email: after-sale.cs@hotmail.com
For Amazon.com orders only:
- Log into your Amazon account.
- Navigate to "Your Orders" and locate the purchase.
- Click on "Contact Seller".
General Assembly Guidelines
- Gather and organize all required parts before beginning assembly.
- Assemble the shed on a flat, clean, and soft surface.
- It is recommended that two or more people assist with the assembly.
- Align the holes correctly before assembly and gently tap parts into place.
- A rubber mallet is recommended for easier installation.
- Avoid assembly in low temperatures, as the product's structure may be affected.
- Refer to the accessories guide to ensure all parts are installed in the correct orientation.
Parts List
| Item No. | Reference Image | Quantity |
|---|---|---|
| A | [Door Panel] | X1 |
| B | [Door Panel] | X1 |
| C | [Door Panel] | X1 |
| D | [Door Panel] | X1 |
| E | [Base Panel] | X1 |
| G | [Wall Panel] | X1 |
| H | [Side Panel] | X2 |
| J | [Roof Panel] | X1 |
| K | [Hinge] | X2 |
| L | [Locking Mechanism] | X1 |
| M | [Base Support] | X1 |
| P | [Connector] | X1 |
| Q | [Connector] | X1 |
| S | [Support Bar] | X1 |
| U | [Screw M3.9x19mm] | X3 |
| V | [Screw M4x25mm] | X24 |
Assembly Steps
Step 1
Attach side panels (H) to the base panel (E). Ensure a secure connection by aligning holes and tapping gently. A click sound indicates proper attachment.
Parts used: H (x2), E (x1)
Step 2
Attach the back panel (G) to the assembled base and side panels. Ensure the panel is correctly oriented and secured.
Parts used: G (x1)
Step 3
Attach the front door panels (C, D) to the structure. Align the panels and secure them.
Parts used: C (x1), D (x1)
Step 4
Secure the structure using screws (V). Insert screws into the designated holes to reinforce the assembly.
Parts used: V (x11)
Step 5
Assemble the floor supports (S) and attach them to the base panel (E). Ensure they are firmly in place.
Parts used: S (x1)
Step 6
Install the locking mechanism (L) and hinges (K) onto the door panels. Attach the U-shaped connectors.
Parts used: L (x1), K (x2), U (x3)
Step 7
Attach the roof panel (J) to the top of the assembled structure. Ensure it clicks into place securely.
Parts used: J (x1)
Step 8
Secure the roof and side panels using screws (V). Insert screws into the designated holes for added stability.
Parts used: V (x7)
Step 9
Assemble the door components. Attach the door panels (B) using connectors (P, Q) and screws (U). Rotate the assembly 180 degrees.
Parts used: B (x1), P (x1), Q (x1), U (x1)
Step 10
Attach the assembled door structure to the main shed body. Align the panels and ensure they click into place.
Parts used: A (x1)
Step 11
Install the side panels (H) and attach them using screws (V). Ensure the hinges (K) are correctly positioned.
Parts used: H (x1), K (x1), V (x3)
Step 12
Attach the base supports (M) and side panels (H) using screws (V). Ensure the hinges (K) are properly aligned.
Parts used: M (x1), H (x1), K (x1), V (x1)
Step 13
Secure the door panels (B) to the shed using screws (V). Ensure the hinges (H) are correctly attached.
Parts used: B (x1), H (x1), V (x3)
Step 14
Installation is now complete. The YITAHOME storage shed is ready for use.
