YITAHOME Patio Lounge Chair Assembly Guide
Model Numbers: FTPLDB-2036, FTPLDB-2037, FTPLDB-2038, FTPLDB-2042, FTPLDB-2043
Product Name: Patio Lounge Chairs
Before You Begin
⚠️ Please confirm all parts are present prior to assembly.
Assemble on a flat, clean, and soft surface.
Do not fully tighten screws until all parts are assembled.
Parts List
| Item No. | Reference Description | Quantity |
|---|---|---|
| A | Backrest frame (slatted) | 1 pc |
| B | Seat and backrest assembly (slatted) | 1 pc |
| C | Front leg assembly (two legs connected by a crossbar) | 1 pc |
| D | Armrest support (bracket) | 1 pc |
| E1 | Backrest support (left vertical piece) | 1 pc |
| E2 | Backrest support (right vertical piece) | 1 pc |
| F | Side frame component (angled piece) | 2 pcs |
| G | Base support (horizontal piece) | 2 pcs |
| H | Crossbar support (horizontal piece) | 1 pc |
| a | M6*45 Screw | 22 pcs |
| b | Hex wrench | 1 pc |
Assembly Steps
Step 1
Attach the side frame components (F) to the base support (G). Then attach the seat and backrest slats (B) to the assembled side frames. Secure using screws 'a'.
Diagram depicts: Part B connecting to two F parts, which are attached to G parts. Screws 'a' are indicated for connection points.
Step 2
Attach the backrest supports (E1 and E2) to the seat and backrest slats (B) and the base support (G). Secure using screws 'a'.
Diagram depicts: E1 and E2 connecting to B and G. Screws 'a' are indicated for connection points.
Step 3
Connect the front leg assembly (C) and armrest support (D) to the main structure. Attach the crossbar support (H) between the backrest supports (E1 and E2). Secure all connections using screws 'a'.
Diagram depicts: C and D being attached to the chair frame. H connects between E1 and E2. Screws 'a' are indicated for all new connection points.
Step 4
Attach the backrest frame (A) to the backrest supports (E1 and E2). Secure using screws 'a'.
Diagram depicts: Part A being attached to the top of the chair structure, connecting to E1 and E2. Screws 'a' are indicated.
Step 5
The chair is now adjustable. The diagram shows how to adjust the recline angle using the numbered positions (1-4) on the mechanism.
Diagram depicts: Two views of the chair, with a magnified inset showing the adjustment mechanism. The inset highlights numbered positions 1, 2, 3, and 4 for recline adjustment.
Step 6
Installation Completed.
Contact Information
For any questions about the installation of YITAHOME products, please email after-sale.cs@hotmail.com.
Alternative contact method for Amazon.com orders:
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
