YITAHOME 7-Drawer Storage Chest
Model: QS-V1
Product Codes: FTBFSD-0009, FTBFSD-0021
Contact Us
If you have any questions about the installation of YITAHOME products, please email: after-sale.cs@hotmail.com.
For Amazon.co.uk orders: 1. Log into your Amazon account. 2. Go to "Your Orders" and find the purchase. 3. Click on "Contact Seller".
Important Assembly Notes
Attention: Do not tighten screws until assembly is complete.
The drawer storage towers are lightweight. Pulling them down could be dangerous, especially when children are playing nearby. Professional installation is highly recommended.
Parts and Hardware List
| Item No. | Description of Reference Image | Quantity |
|---|---|---|
| 1 | Image of a screw | X6 |
| 2 | Image of a screw | X4 |
| 3 | Image of a screw | X4 |
| 4 | Image of a screw | X2 |
| 5 | Image of a screw | X4 |
| 6 | Image of a screw | X2 |
| 7 | Image of a screw | X2 |
| 8 | Image of a wooden dowel/connector | X1 |
| A | Image of a left side panel | X1 |
| B | Image of a right side panel | X1 |
| C | Image of a top panel | X1 |
| D | Image of an upper back panel | X1 |
| E | Image of a lower back panel | X1 |
| F | Image of a shelf panel | X2 |
| G | Image of a bottom panel | X1 |
| H | Image of a drawer front panel | X3 |
| I | Image of a left drawer side panel | X3 |
| J | Image of a right drawer side panel | X3 |
| K | Image of a drawer back panel | X2 |
| L | Image of a drawer bottom panel | X2 |
| M | Image of a drawer pull/handle | X2 |
Assembly Steps
Step 1
Attach part A (left side panel) to part C (top panel) and part G (bottom panel) using six pieces of screw (1). Attach part B (right side panel) to part C and G using six pieces of screw (1). Insert one dowel (8) into the top of part A and B. Attach shelves (F) to side panels (A, B) using screws (2) and (3). The diagram indicates the use of 2x (2) and 4x (3) for attaching the shelves.
Diagram shows side panels (A, B) being attached to top (C) and bottom (G) panels with screws (1). Shelves (F) are attached to side panels with screws (2, 3). Dowel (8) is inserted into top of side panels.
Step 2
Slide back panels D (upper) and E (lower) into the grooves on the back of the assembled frame. Secure the frame by attaching part B (right side panel) to the back panels using screws (2) and (3).
Diagram shows back panels D and E being slid into place and then secured with screws (2, 3) to the right side panel.
Step 3
Assemble the drawers. For each drawer, attach the front panel (H) to the side panels (I, J) and back panel (K) using screws (2) and (5). Slide the drawer bottom panel (L) into the grooves. Attach the drawer pull (M) to the drawer front (H) using screws (4). This process is repeated for the remaining drawers.
Diagram shows one drawer assembly: Front (H), sides (I, J), back (K), bottom (L). Drawer pull (M) attached to front with screws (4). Main assembly uses screws (2) and (5).
Step 4
Insert the assembled drawers into the chest frame.
Diagram shows drawers being slid into the chest.
Step 5
Insert the assembled drawers into the chest frame.
Diagram shows drawers being slid into the chest.
Step 6
Attach the top panel (C) to the assembled frame using two pieces of screw (6).
Diagram shows the top panel (C) being attached to the frame with screws (6).
Step 7
Fixing the fabric dresser to the wall is recommended. Please follow the instructions.
Diagram indicates the back of the dresser and suggests wall mounting.
Step 8
Installation Completed.
Diagram shows the fully assembled chest.
