YITAHOME NBKTHS-V3 Outdoor Storage Shed Assembly Instructions
Model Numbers: FTPLDB-3001, FTPLDB-3006, FTPLDB-3002, FTPLDB-3007, FTPLDB-3005, FTPLDB-3008
Important Information & Assembly Guidelines
IMPORTANT: Retain for future reference. Read carefully.
German: WICHTIG, FÜR SPÄTERE NACHSCHLAGE AUFBEWAHREN: SORGFÄLTIG LESEN
Spanish: IMPORTANTE, GUARDAR PARA REFERENCIA FUTURA: LEER ATENTAMENTE
Italian: IMPORTANTE, CONSERVARE PER RIFERIMENTI FUTURI: LEGGERE ATTENTAMENTE
French: IMPORTANT, À CONSERVER POUR RÉFÉRENCE FUTURE : LIRE ATTENTIVEMENT
General Assembly Guidelines:
- Gather and organize all required parts prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Two or more people are needed for the assembly.
- Align the holes before assembly and snap into place with a slight tap.
- Please prepare a rubber mallet in advance for convenient installation.
- The product's structure prevents it from being conveniently assembled in low temperatures, so do not intentionally install at low temperatures.
- During installation, please refer to the accessories guides to ensure that they are installed in the correct directions.
Parts List
Main Components:
| Part Identifier | Description | Quantity |
|---|---|---|
| A | Side Panel (Left) | 1 pc |
| B | Base Panel | 1 pc |
| C | Front Door Panel (Left) | 1 pc |
| D | Front Door Panel (Right) | 1 pc |
| E | Side Panel (Right) | 1 pc |
| F | Back Panel (Left) | 1 pc |
| G | Back Panel (Right) | 1 pc |
| H | Roof Panel | 1 pc |
Hardware and Accessories:
| Item No. | Description | Quantity |
|---|---|---|
| 1 | Hinge | 6 pcs |
| 2 | Screw M8x20mm | 12 pcs |
| 4 | Screw M5x16mm | 1 pc |
| 5 | Screw M8x20mm | 1 pc |
| 7 | Screw M4x12mm | 1 pc |
| 8 | Locking Mechanism Component | 1 pc |
| 9 | Locking Mechanism Component | 1 pc |
| 10 | Screw M8x20mm | 18 pcs + 1 extra |
| 11 | Screw M5x16mm | 24 pcs + 4 extra |
| 12 | Screw M4x12mm | 12 pcs + 2 extra |
Assembly Steps
Step 1: Attach Roof to Base
Diagram Description: The base panel (B) is laid flat. Part H (roof panel) is shown above. A close-up shows part B and part H with triangularly marked spots. Another close-up shows part H being inserted into part B.
Instructions:
Note: The triangularly marked spots on parts B and H should be on the same side.
Insert part H into part B's slot first, then make sure it can slide backward to the full extent.
Step 2: Attach Left Back Panel
Diagram Description: The base panel (B) with the roof panel (H) attached is shown. Part F (left back panel) is shown being inserted into slots on part B.
Instructions:
Insert part F into part B's slots first, then make sure it can slide right to the full extent.
Step 3: Attach Right Side Panel
Diagram Description: The structure from Step 2 is shown. Part E (right side panel) is shown being inserted into slots on part B.
Instructions:
Insert part E into part B's slots first, then make sure it can slide right to the full extent.
Step 4: Attach Right Back Panel
Diagram Description: The partially assembled structure is shown. Part G (right back panel) is shown being attached to the base panel (B). The diagram indicates to follow the same step for parts G and B.
Instructions:
Follow the above step for parts G and B.
Step 5: Attach Front Door Panels
Diagram Description: The main structure (base B, roof H, side E, back F & G) is shown. Front door panels C (left) and D (right) are shown being attached.
Instructions:
Attach front door panels C and D to the structure.
Step 6: Install Hinges on Left Door
Diagram Description: Close-ups show the installation of hinges (item 1) onto the left front door panel (C) using screws (item 2 and 11).
Instructions:
Install hinges (item 1) onto the left front door panel (C) using screws (item 2 and 11).
Note: Part 1 (hinge) has two sides that differ in width. Before fixing the installation position, either side can be selected to ensure that all hinges installed use the same side width.
Step 7: Install Hinges on Right Door
Diagram Description: Close-ups show the installation of hinges (item 1) onto the right front door panel (D) using screws (item 2, 4, 5, 7, 11, 12).
Instructions:
Install hinges (item 1) onto the right front door panel (D) using screws (item 2, 4, 5, 7, 11, 12).
Note: Part 1 (hinge) has two sides that differ in width. Before fixing the installation position, either side can be selected to ensure that all hinges installed use the same side width.
Step 8: Attach Side Panels to Base
Diagram Description: The structure is shown with side panels E, F, G, H attached to the base B. Hardware item 11 (screws) is shown being used.
Instructions:
Attach side panels E, F, G, H to the base B using hardware item 11.
Step 9: Install Locking Mechanisms
Diagram Description: Close-ups illustrate the installation of locking mechanism components (items 8, 9, 11, 12) onto the doors and frame.
Instructions:
Install locking mechanism components (items 8, 9, 11, 12) to secure the doors.
Note: Part 1 (hinge) has two sides that differ in width. Before fixing the installation position, either side can be selected to ensure that all hinges installed use the same side width.
Step 10: Final Assembly and Locking States
Diagram Description: Shows the final assembled shed. Close-ups illustrate the door in an "Unlocked State" and a "Locked State" using the locking mechanism.
Instructions:
The installation is now complete. The shed doors can be operated between unlocked and locked states.
