Main Unit
Hamilton Motor Company Main Unit
LVDS 3.001.106 To OEM Monitor
LVDS 3.001.107 To OEM LVDS Wire
RF Connects to RF input
DIP Switches Configuration (1-8)
OUT Port Output port
IN Port Input port
Antenna Installation
It is best to install the antenna away from metal objects. Antenna installs behind the factory radio/screen.
OEM Radio Integration
The system integrates with the OEM Radio through several connections:
Connect OEM Radio Harness Main connection to OEM Radio
Audio Connects to OEM Radio Audio
Power Wire Connects to OEM Radio Power
Media CAN or Mouse Connects to Media CAN
REVERSE Not used
Speaker Not used
Front Panel Ports
The main unit features a front panel with the following ports:
360 CAM 360 Camera input
TOUCH Touch interface input
USB Connects to USB 3.001.132
POWER Power input
Additional Cables and Connections
14GX/13LX.16LC IF 3.001.114 Identifier for a specific cable/interface
USB 3.001.132 Connects to front panel USB port. Used for wired CarPlay and system updates.
Ext MIC External Microphone input - Not used
GND Ground connection
ACC OUT Accessory Output - Not used
Cam Power Camera Power output
AV-OUT Audio/Video Output
Front Cam Front Camera input
CAMERA Rear Camera input
USB General USB connection - Not used
System will use factory microphone and camera by default.
Support and Revision
For assistance, please contact Hamilton Motor Company:
Email: support@hamiltonmotorcompany.com
Phone: (919) 858-2890
Revision: 6.25
