2009-11 Toyota Land Cruiser LC200 Wiring Diagram
Hamilton Motor Company
LVDS Connection
A male light blue LVDS connector originates from the Hamilton Box and connects to the original screen rear. This connection also interfaces with the original blue LVDS wire.
Bluetooth/WiFi Antenna
The BT/WiFi Antenna connects to the white port on the Hamilton Box.
Hamilton Interface Power
The Hamilton Interface Main Power Connector is a Tan Long connector.
Accessory Harness
The Accessory Harness Main Connector is a Tan Short connector. Several connections on this harness are marked as "Not used".
CAN Bus Integration
It is necessary to connect the CAN box to the Hamilton main harness for proper system integration.
Factory Screen and Radio Interfaces
Connections to Factory Screen (Upper Unit):
- CAM Power
- Camera
Connections to Factory Radio (Lower Unit):
- Power
- Audio
OEM Camera and USB Functionality
The diagram indicates an OEM Camera connection.
A USB port is provided for wired CarPlay and device charging.
Additional Camera Wiring
Two yellow camera RCA wires are to be connected together using the provided Hamilton harness.
Default System Operation
The system is configured to utilize the factory microphone and camera by default.