JLab JBuds Air Pro Wireless Earbuds

Warranty and Support

Your Warranty: All warranty claims are subject to JLab authorization and our sole discretion. Keep your proof of purchase to ensure your warranty is valid.

Contact Us: Reach us at support@jlab.com or visit intl.jlab.com/contact.

Register Today: Visit intl.jlab.com/register for product updates, tips, and FAQs.

Bluetooth Pairing

Adding New Bluetooth Devices: Turn off Bluetooth on any previously paired device. Activate it on your new device. The earbuds will automatically enter Bluetooth pairing mode. Select 'JLab JBuds Air Pro' in your new device's settings to establish the connection.

1. Take the earbuds out of the case and remove the stickers. Place the earbuds back into the case and close the lid.

   [Image Description: Earbuds being removed from charging case, then placed back inside.]

2. The blue lights on the case indicate charging. Remove the earbuds from the case.

   [Image Description: Charging case with blue indicator lights.]

3. One earbud will flash blue/white, indicating it is ready to pair with your device. Select 'JLab JBuds Air Pro' in your device's Bluetooth settings.

   [Image Description: Earbud flashing blue/white. Phone screen showing Bluetooth settings with 'JLab JBuds Air Pro' selected.]

Button Functions

Left Earbud:

• Volume Down: Single press.
• Siri (iOS) or OK Google (Android): Double press.
• Music/Movie Mode: Press and hold for over 1 second.
• Turn On: Press and hold for over 3 seconds.
• Change Equalizer: Triple press (cycles through 3 EQ settings).

Right Earbud:

• Volume Up: Single press.
• Answer Call: Single press.
• Hang Up Call: Double press.
• Reject Incoming Call: Press and hold for over 1 second.
• Play/Pause: Double press.
• Fast Forward: Press and hold for over 1 second.
• Turn On: Press and hold for over 3 seconds.
• Be Aware: Triple press.

Turn Off Without Case: Turn off Bluetooth from your device settings. The earbuds will turn off automatically after 3 minutes.

Vocal Instructions

• Power On: Tone
• Bluetooth Connected: Two beeps
• Low Battery: "Low battery" (less than 20%)
• Power Off: Tone

Custom EQ3 Sound Settings

Press the right or left earbud three times to cycle through sound profiles. The JBuds Air Pro offers three distinct sound settings:

• JLab Signature (One Beep): JLab C3™ signature sound with amplified vocals and bass.
• Balanced (Two Beeps): Harmonious sound without extra amplification.
• Amplified Bass Frequencies (Three Beeps): Amplified bass and sub-bass.

Charging Earbuds and Case

Charging Earbuds: Placing the earbuds in the charging case will automatically turn them off and begin charging. Blue lights indicate the earbuds are charging and will turn off when fully charged. Removing the earbuds will automatically turn them on and connect to the last paired device.

[Image Description: Left and Right Earbuds being placed into the charging case.]

Charging Case: Connect the JBuds Air Pro to a computer or a USB power source (5V 1A or less). The case's LEDs will pulse white while charging and turn solid white when fully charged.

[Image Description: Charging case connected via USB cable to a power source.]

Multipoint: Connect 2 Devices Simultaneously

1. Once the FIRST device is connected, turn off Bluetooth in its settings. The JBuds Air Pro will automatically enter Bluetooth pairing mode.
2. Go to your SECOND device's Bluetooth settings and connect to JBuds Air Pro.
3. Go back to your FIRST device's Bluetooth settings. Turn Bluetooth back on and connect to JLab JBuds Air Pro.

[Image Description: Sequence of phone screens showing Bluetooth connection status for two devices.]

Fit Adjustment

Cush Fin™ Ear Tip: Try all the included ear fins and ear tips for optimal fit and a good seal. Place the earbud in your ear and rotate it for the best fit.

[Image Description: Close-up of an earbud with an ear fin. Earbud being inserted and rotated in an ear.]

Troubleshooting: No Sound or Disconnected Earbuds (Manual Reset)

1. Leave the earbuds in the charging case and remove 'JLab JBuds Air Pro' from your Bluetooth device settings.
2. Quickly tap one earbud in the charging case 7 times. The earbud will flash blue 4 times.
3. Quickly tap the other earbud in the charging case 7 times. The earbud will flash blue 4 times.
4. Remove both earbuds from the charging case. One earbud will flash blue/white, indicating it is ready to pair with your device.

[Image Description: Earbuds in case, showing 7 taps. Earbuds removed, one flashing blue/white.]

For video tutorials, visit: INTL.JLAB.COM/MANUALS

Quick Tips

• Either earbud can connect to your device and be used independently. Simply remove an earbud from the charging case for it to connect automatically.
• Choosing the correct ear tip significantly improves sound quality through a better seal. Try all ear tips for the best results.

Attention and Warnings

Attention: Carefully dry the earbuds before placing them in the charging case to avoid damaging the case. The earbuds are sweat and water resistant, but the case is not.

[Image Description: Water droplet near an earbud.]

Warnings:

• Avoid exposing the product to extreme heat, cold, or humidity.
• Avoid dropping the earbuds or stepping on them.
• Earwax can accumulate in the ear tips, degrading audio quality. Carefully remove earwax with a cotton swab or other small object to improve audio quality.
• If you experience discomfort or pain, try lowering the volume or temporarily stop using the device.
• If you experience recurring discomfort while using this product, stop using it and consult a doctor.
• We recommend taking care of your earbuds as you would a pair of sunglasses, and storing them in a secure place when not in use.