JLab JBuds Air Pro Wireless Earbuds
User Manual and Guide
Welcome and Support
Thank you for purchasing JLab products. We stand behind our products with pride.
Product Warranty: All warranty claims are determined at JLab's discretion. Please retain your proof of purchase to receive warranty service.
Inquiries: Contact support@jlab.com or visit intl.jlab.com/contact.
Register Now: Visit intl.jlab.com/register for product updates, usage tips, and FAQs.
Certification: FCC ID: R-R-JLA-JBUDSAIRPRO. Manufacturer: JLAB AUDIO. Model Name: IAPEBJBAIRPRORBLK82. Country of Origin: China. This device complies with specific low power radio wave regulations for wireless data communication systems.
Bluetooth Pairing
Remove the stickers from the earbuds and place them in the case. Close the lid. The earbuds will automatically enter Bluetooth pairing mode. Connect to 'JLab JBuds Air Pro' in your device's settings.
Diagram Description: Two earbuds are shown in their charging case. One earbud is removed. A smartphone screen displays Bluetooth settings, with 'JLab JBuds Air Pro' selected.
The blue indicator light on the case indicates charging. Remove the earbuds from the case.
A flashing blue/white light on one earbud indicates it is ready to pair with your device. Select 'JLab JBuds Air Pro' in your device's Bluetooth settings.
Button Functions and Audio Prompts
Earbud Controls
Left Earbud
- Tap once: Volume Down ?
- Tap twice: Activate Voice Assistant (Siri/OK Google) ?️
- Long press (1 sec): Activate Media Mode ?
- Long press (3 sec): Power On ?
- Triple tap: Cycle through EQ settings ?️
Right Earbud
- Tap once: Volume Up ?
- Tap once: Answer/End Call ?
- Long press (1 sec): Reject Call ??
- Tap twice: Play/Pause ▶️ / ⏸️
- Long press (1 sec): Next Track ⏭️
- Long press (3 sec): Power On ?
- Triple tap: Cycle through EQ settings ?️
Audio Prompts
- Power On: Chime
- Bluetooth Connected: Two beeps
- Low Battery: Voice prompt "Low Battery" (below 20%) ?⬇️
- Power Off: Chime
Custom EQ3 Sound Modes
Tap either earbud three times to cycle through the 3 EQ settings:
- JLab Signature (1 beep): Boosted vocals and bass.
- Balanced (2 beeps): Even sound with no extra enhancement.
- Bass Boost (3 beeps): Amplified bass and sub-bass.
Diagram Description: Three distinct icons representing the JLab Signature, Balanced, and Bass Boost EQ modes.
Charging Your Earbuds and Case
Earbud Charging
Place earbuds in the charging case to automatically turn off and begin charging. The blue indicator light shows the earbuds are charging and will turn off when fully charged. Removing the earbuds will automatically turn them on and connect to the last paired device.
Diagram Description: Earbuds are shown being placed into the charging case. An indicator light is shown on the case.
Case Charging
Connect JBuds Air Pro to a computer or USB 5V 1A (or lower) power source. The LED will flash white while charging and turn solid white when fully charged.
Diagram Description: The charging case is shown connected to a power source via a USB cable, with an LED indicator.
Multipoint Connection
Connect to two devices simultaneously:
- After connecting to the first device, turn off Bluetooth on that device. The JBuds Air Pro will automatically enter Bluetooth pairing mode.
- Open Bluetooth settings on the second device and connect to 'JLab JBuds Air Pro'.
- Open Bluetooth settings on the first device. Turn on Bluetooth and connect to 'JLab JBuds Air Pro'.
Diagram Description: A sequence of smartphone screens illustrating the process of connecting to two devices, showing Bluetooth settings and connection status.
Wearing Your Earbuds
For optimal fit and proper noise isolation, use all Cush Fin™ and ear tip options. Insert into your ear and rotate to adjust for the most comfortable fit.
Diagram Description: An earbud is shown with its Cush Fin and ear tip. An illustration demonstrates inserting the earbud into the ear and rotating it for a secure fit.
Troubleshooting: Connection Issues or Earbud Separation (Manual Reset)
- Place both earbuds in the charging case. You do not need to disconnect them from your device's Bluetooth settings.
- Quickly tap one earbud in the charging case 7 times. The earbud will flash blue 4 times.
- Quickly tap the other earbud in the charging case 7 times. The earbud will flash blue 4 times.
- Remove both earbuds from the charging case. One earbud will flash blue/white, indicating it is ready to pair with your device.
Diagram Description: A step-by-step visual guide showing earbuds in the case, tapping actions, and the resulting flashing light indicating pairing readiness.
Video Guide: Visit INTL.JLAB.COM/MANUALS for a video tutorial.
Quick Tips
- You can connect both earbuds to your device to use them independently. Simply remove the earbuds from the charging case, and they will automatically connect.
- Choosing the right ear tip will significantly improve audio quality by providing proper noise isolation for the driver. Experiment with all ear tips for the best results.
Warnings and Precautions
Warnings
- To prevent damage to the case, ensure earbuds are completely dry before placing them in the charging case. Earbuds are sweat and water-resistant, but the case is not. ⚠️
Precautions
- Avoid extreme heat, cold, and humidity. ?
- Do not drop or apply excessive force to the earbuds.
- Earwax may build up on the earbud tips, affecting sound quality. Carefully remove earwax using a dry cotton swab or other small tool to improve sound quality.
- If you experience discomfort or pain during use, lower the volume or temporarily discontinue use.
- If you continue to experience discomfort, discontinue use and consult a physician.
- Treat your earbuds with care, similar to protective eyewear. Store them in a safe place when not in use.
Get the App
Download the JLab Store and Burn-in Tool app for product updates and more.
