Welcome to JLab Audio!
We are excited that you chose JLab Audio to rock out! We are proud of our products and stand fully behind them.
Your Warranty
All warranty claims are subject to approval by JLab Audio and are at the sole discretion of JLab. Please retain your proof of purchase to claim warranty service.
Contact Us
Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
Register Today
Visit intl.jlabaudio.com/register for product updates, useful tips, FAQs, and more.
Initial Setup: Bluetooth Pairing
- Turn on Bluetooth in your device settings.
- When the Studio Pro wireless headphones are turned off, press and hold the power button for approximately 8 seconds.
- Select "JLab Studio Pro" in your device settings to connect.
A quickly blinking red and blue light indicates searching for a Bluetooth device.
When the headphones are paired, two beeps will sound, and the blue light will blink slowly.
New Pairing / Additional Devices
Turn off Bluetooth on your previously paired device and turn on Bluetooth on a new device. Repeat the INITIAL SETUP for new devices.
Notes:
- Bluetooth is a wireless radio technology, meaning it is sensitive to objects between the headphones and the connected device. The headphones can be used within a 10-meter (33 ft) range of a connected device, provided there are no larger objects (like walls, etc.) in between.
- Once connected, the headphones will remember your device and automatically pair when turned on. Only one device can be connected at a time. To pair a different device, disconnect the current device first via Bluetooth settings.
- If the Bluetooth connection is interrupted for any reason, reconnect the Bluetooth device manually.
Button Functions
Headphone Controls
- Volume Up: Single click
- Next Track: Click and hold for 2+ seconds
- Volume Down: Single click
- Previous Track: Click and hold for 2+ seconds
- Power On/Off: Click and hold for 2+ seconds
- Play/Pause / Answer Call / End Call: Single click
- Reject Incoming Call: Click and hold for 1 second
- Activate Siri (iOS) or "OK Google" (Android): Double click
- Bluetooth Pairing: See Initial Setup
EQ Settings
Press both buttons simultaneously (Studio Pro will cycle through 3 EQ settings):
- JLab Signature (One beep): JLab C3™ Signature Sound with enhanced vocals and bass.
- Balanced (Two beeps): Even sound without additional amplification.
- Bass Boost (Three beeps): Enhanced bass and sub-bass.
Charging
Connect the USB Type-C charging cable (included) to the headphones and plug it into a computer or a USB 5V/1A output device (not included). Ensure the USB connection has a power source.
A solid red light indicates the headphones are charging.
A solid blue light indicates the charging process is complete.
Charging Status: Red light indicates charging; Blue light indicates fully charged.
Caution
- Avoid moisture or liquids entering the earcups.
- Avoid extreme heat, cold, and humidity.
- Do not drop or crush the headphones, strain the cable with quick pulls or excessive force, or bend the cable at sharp angles.
- Wax can accumulate in the earcups, which may affect sound quality. Carefully remove wax with a cotton swab or other small tool to improve sound quality.
- If you experience discomfort or pain, try lowering the volume or temporarily discontinuing use. If you regularly experience discomfort while using this product, stop use and consult your doctor.
- We recommend treating your headphones like a pair of sunglasses and storing them in a safe place when not in use.
