JLab Audio Studio Pro Wireless Headphones

Welcome & Support

Thank you for choosing JLab Audio! We are proud of our products, which is why we always guarantee availability and support.

Warranty: All warranty claims are subject to JLab Audio authorization and are granted at our sole discretion. It is recommended to always keep the purchase receipt to request warranty service.

Contact: For any inquiries, you can write to support@jlabaudio.com or visit the page intl.jlabaudio.com/contact.

Register Today: Visit intl.jlabaudio.com/register for product updates, tutorials, and FAQs.

First Configuration: Bluetooth Pairing

1. Step 1: Turn on the Bluetooth in your device settings.
2. Step 2: When the Studio Pro wireless headphones are off, press and hold the Power Button for approximately 8 seconds. A rapidly flashing red and blue light indicates the headphones are searching for a Bluetooth device.
3. Step 3: Select "JLab Studio Pro" in your device's settings to establish the connection. When the headphones are paired, you will hear two beeps, and the blue light will flash slowly.

Pairing New or Additional Devices

To pair a new or additional device: Turn off Bluetooth on the previously paired device and turn it on for the new device. Repeat the steps from the 'First Configuration: Bluetooth Pairing' for new devices.

Important Notes:

• Bluetooth is a wireless radio technology, meaning it is sensitive to objects between the headphones and the connected device. The headphones are designed to be used within 10 meters (33 feet) of a connected device, without large objects (like walls) in between.
• Once a connection is established, the headphones will remember the device and automatically pair in the future when powered on. Only one device can be connected at a time. To pair a different device, you must first unpair the currently connected device through its Bluetooth settings.
• If, for any reason, the Bluetooth connection is interrupted, manually reconnect the Bluetooth device.

Button Functions

• Volume Up: Single click.
• Next Track: Press and hold for at least 2 seconds.
• Volume Down: Single click.
• Previous Track: Press and hold for at least 2 seconds.
• Power On/Off: Press and hold for at least 2 seconds.
• Play/Pause / Answer & End Call: Single click.
• Reject Incoming Call: Press and hold for 1 second.
• Activate Siri (iOS) or "OK Google" (Android): Double click.
• Bluetooth Pairing: Refer to the 'First Configuration' section.

EQ Modification:

Press both buttons simultaneously. The Studio Pro will cycle through 3 EQ settings:

• JLab Signature (One Beep): Audio with amplified vocals and bass.
• Balanced (Two Beeps): Uniform audio without additional enhancements.
• Bass Boost (Three Beeps): Amplified bass and deep bass.

Charging

Connect the included USB Type-C charging cable to the headphones and connect to a computer or a device with a 5V/1amp USB port (not included). Ensure the USB connection has a power source.

A solid red light indicates the headphones are charging. A solid blue light indicates charging is complete.

Precautions

• Avoid moisture or liquids entering the earcups.
• Avoid exposure to extreme temperatures and humidity.
• Avoid dropping or crushing the headphones; avoid bending the cable and subjecting it to excessive stress, pulling quickly or with too much force.
• Accumulated earwax in the earcups may compromise sound quality. Carefully remove it with a cotton swab or a similarly sized tool to improve sound quality.
• If you experience discomfort or pain, lower the volume or temporarily stop using the earbuds.
• If you experience persistent discomfort during use, discontinue use and consult your doctor.
• It is recommended to handle the headphones with care and store them in a safe place when not in use.

Shop & Resources

Shop Products | Product Alerts | Headphone Burn-in. JLab Audio + Burn-in Tool.

Available on the App Store and Google Play.

Visit us at: INTL.JLABAUDIO.COM