JLab Audio [registered-trademark] Studio Pro Wireless Headphones
Welcome and Warranty Information
We love that you move with JLab Audio [registered-trademark]! We are proud of our products and stand behind them completely.
YOUR WARRANTY All warranty claims are subject to JLab Audio authorization and our sole discretion. Keep your proof of purchase to ensure warranty coverage.
CONTACT US You can contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
REGISTER NOW Visit intl.jlabaudio.com/register for product updates, tips, and FAQs.
Initial Setup: Bluetooth Connection
Follow these steps to connect your Studio Pro Wireless headphones via Bluetooth:
- Step 1: Activate Bluetooth
On your device (smartphone, tablet, etc.), go to the Bluetooth settings and turn Bluetooth ON.
- Step 2: Power On Headphones
With the Studio Pro wireless headphones turned OFF, press and hold the power button for approximately 8 seconds. A rapid flash of the blue and red indicator light on the headphones signifies that they are in Bluetooth search mode.
- Step 3: Connect to Device
On your device's Bluetooth settings, select "JLab Studio Pro" from the list of available devices to establish the connection. Once connected, you will hear two beeps, and the blue indicator light will flash slowly.
Visual Aid Description: The initial setup is illustrated with three steps. Step 1 shows a smartphone screen with Bluetooth settings enabled. Step 2 shows the headphones with the power button being held, and an indicator light flashing blue and red. Step 3 shows the smartphone screen listing "JLab Studio Pro" as a connectable device, and the headphones with a slow-fading blue light indicating a successful connection.
Connecting New / Additional Devices
To connect to a new device:
- Turn OFF Bluetooth on your previously connected device.
- Turn ON Bluetooth on the new device.
- Repeat the initial Bluetooth connection process (Steps 1-3 above) with the new device.
Notes:
- Bluetooth is a wireless radio technology sensitive to obstructions between the headphones and the connected device.
- For optimal performance, use the headphones within a maximum distance of 33 feet (10 meters) from the connected device, avoiding large objects like walls.
- Once successfully paired, the headphones will be remembered by your device and will automatically connect when turned on.
- Only one device can be connected simultaneously. To connect a different device, first disconnect the currently paired device via its Bluetooth settings.
- If the Bluetooth connection is lost, reconnect your device manually through its Bluetooth settings.
Button Functions
Understand the controls for your JLab Studio Pro headphones:
- VOLUME UP: Single click the volume plus button.
- NEXT SONG: Click and hold the volume plus button for 2 seconds.
- VOLUME DOWN: Single click the volume minus button.
- PREVIOUS SONG: Click and hold the volume minus button for 2 seconds.
- POWER ON / OFF: Click and hold the power button for 2 seconds.
- PLAY / PAUSE / ANSWER / ACCEPT CALLS: Single click the power button.
- REJECT INCOMING CALL: Click and hold the power button for 1 second.
- ACTIVATE SIRI (iOS) or “OK GOOGLE" (ANDROID): Double click the power button.
- CONNECT TO BLUETOOTH: Refer to the Initial Setup section.
- CHANGE EQ: Press both the volume up and volume down buttons simultaneously. The headphones will cycle through 3 EQ presets.
EQ Presets:
- JLab Distinctive (One Beep): JLab C3™ technology with amplified voice and bass.
- Balanced (Two Beeps): Uniform sound without additional enhancements.
- Bass Boost (Three Beeps): Amplified bass and sub-bass.
Visual Aid Description: A diagram illustrates the headphone buttons and their functions. It details single clicks, double clicks, and press-and-hold actions for volume, playback, calls, and voice assistant activation. EQ presets are described with their corresponding beep indicators and sound profiles.
Charging
To charge your headphones:
Connect the included USB Type-C charging cable to the headphones and plug the other end into a USB power source (e.g., a computer or a 5V/1A USB adapter, not included). Ensure the USB connection provides adequate power.
Charging Indicators:
- A solid red light indicates the headphones are currently charging.
- A solid blue light indicates that charging is complete.
Visual Aid Description: A diagram shows a USB Type-C cable connected to the headphone's charging port and plugged into a power source. It also illustrates the charging status lights: red for charging and blue for fully charged.
