JLab Audio

First Time Setup: Bluetooth Pairing

1. Step 1: Enable Bluetooth

   Turn on the Bluetooth in your device settings.

   [Image: Smartphone screen showing Bluetooth settings with Bluetooth turned on.]

2. Step 2: Enter Pairing Mode

   When the JBuddies Studio Wireless Headphones are powered off, press and hold the Power Button [▶️] for approximately 10 seconds. A fast blinking red and blue light indicates searching for a Bluetooth device.

   [Image: JLab JBuddies Studio Wireless Headphones with the Power Button highlighted, showing a blinking red and blue indicator light.]

3. Step 3: Connect to Device

   Select "JLab JBuddies Studio BT" in your device settings to connect.

   [Image: Smartphone screen showing available Bluetooth devices, with "JLab JBuddies Studio BT" selected.]

   When the headphones are paired, voice prompts will say "You are connected," and the blue light will flash slowly.

Notes:

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.
• The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.
• Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

Charging

Connect the Micro USB cable to a computer or USB 5V 1A (or less) output device.

[Image: Micro USB cable connected to the headphones and a power source. Indicator lights show "CHARGING" and "FULLY CHARGED" states.]

Controls

Headphone Controls

• VOLUME + / TRACK CONTROL
• POWER ON / OFF
• AUX INPUT / OUTPUT
• CHARGING PORT

Bluetooth Operations

• BLUETOOTH PAIRING: Follow First Time Setup: Bluetooth Pairing.
• POWER ON / OFF: Press and hold 3 seconds. (Slow blinking blue light indicates power is on).
• PLAY / PAUSE / ANSWER / HANG UP CALLS: 1 Click.
• ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID): 2 Clicks.
• RE-PAIRING AND ADDITIONAL DEVICES: When power is off, press and hold 10 seconds.
• VOLUME UP / VOLUME DOWN: 1 Click.
• TRACK FORWARD / TRACK BACKWARD: 2 Second hold.

Share Mode

Connect the included AUX CABLE to either side to another JBuddies Studio or any other wired headphone/earbud for Share Mode.

Option 1:

[Image: Diagram showing two pairs of headphones connected side-by-side using an AUX cable, labeled "EITHER SIDE".]

Option 2:

[Image: Diagram showing two pairs of headphones connected side-by-side using an AUX cable, labeled "EITHER SIDE".]

Go Wired

Connect the AUX CABLE to a device for a wired connection.

[Image: Smartphone connected to headphones via an AUX cable, labeled "WITH" and "EITHER SIDE".]

Cautions

• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones

JLab Audio + Burn-in Tool

[Image: Icons for App Store and Google Play.]

jlabaudio.com