JLab Studio Wireless Headphones
Thank you for choosing JLab Audio! We are proud of our products, which is why we always guarantee availability and assistance. ?
Warranty & Support
?️ Warranty: All warranty claims are subject to JLab Audio authorization and are granted at our sole discretion. It is recommended to always keep the purchase receipt to request warranty service.
✉️ Contacts: For any inquiries, you can write to support@jlabaudio.com or visit the page intl.jlabaudio.com/contact.
✍️ Register Today: intl.jlabaudio.com/register
Product Updates | ? Tutorial | ❓ FAQ and more
First Configuration: Bluetooth Connection
Activate Bluetooth: Go to your device's settings and turn on Bluetooth.
[Diagram: Smartphone screen showing Bluetooth settings with the Bluetooth toggle switched ON.]
Pairing Mode: Once the Studio Wireless headphones are turned off, press and hold the power button for approximately 8 seconds.
The fast-blinking red and blue light indicates that the device is searching for Bluetooth.
[Diagram: Illustration of the JLab Studio Wireless headphones with a visual indicator of the red and blue blinking light.]
Connect Device: Select 'JLab Studio' in your device's Bluetooth connection settings.
Once connected, the headphones will emit 2 beeps and a blue light will flash slowly.
[Diagram: Smartphone screen showing Bluetooth settings with 'JLab Studio' selected and connected. The JLab Studio headphones are shown next to the phone.]
Connecting New / Additional Devices
Turn off Bluetooth on the previously connected device and turn it on for the new device. Repeat the FIRST CONFIGURATION procedure for new devices.
Important Notes
- Bluetooth is a wireless radio technology sensitive to objects between the headphones and the connected device. The headphones are designed for use within a maximum distance of 10 meters (approx. 33 feet) from the connected device, without intervening objects like walls.
- Once connected, the headphones remember the device and will automatically connect on each future power-on. Only one device can be connected at a time. To connect a different device, turn off Bluetooth from the currently connected device's settings.
- If the Bluetooth connection is lost, reconnect the device manually.
Button Functions
- VOLUME +: Press 1 time
- TRACK FORWARD: Press and hold for 2 seconds
- VOLUME -: Press 1 time
- TRACK PREVIOUS: Press and hold for 2 seconds
- POWER ON / OFF ⚡: Press and hold for 2 seconds
- PLAY / PAUSE ▶️ / ⏸️ | ANSWER / HANG UP ?: Press 1 time
- REJECT INCOMING CALL ??: Press and hold for 1 second
- ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID) ?️: Press 2 times
- BLUETOOTH CONNECTION ?: Follow the FIRST CONFIGURATION procedure
EQ Change ?️
Press both buttons simultaneously (Studio switches between 3 different EQ settings):
- JLab SIGNATURE (One Beep ?): Audio with amplified vocals and bass.
- BALANCED (Two Beeps ??): Uniform audio without added enhancements.
- BASS BOOST (Three Beeps ???): Amplified bass and deep bass.
Voice Notifications
- POWER ON: Audible tone
- BLUETOOTH CONNECTED: Two beeps
- LOW BATTERY: "Low battery" voice prompt (Less than 20%)
- POWER OFF: Audible tone
Charging ?
Important: For optimal performance, charge overnight using a micro USB cable before use. A full charge takes approximately 3 hours.
Connect the micro USB cable (included) to the headphones and the USB end to a computer or AC adapter (not included). Ensure the USB connection has a power source.
The indicator light is red during charging and turns blue when the battery is fully charged.
Note: The Studio Bluetooth headphones can also be used while charging. After starting the charge, turn on the headphones and connect them to a device.
[Diagram: Illustration showing a micro USB cable connected to the headphones. Two states are indicated: 'CHARGING' with a red light, and 'CHARGE COMPLETE' with a blue light.]
Precautions ⚠️
- Avoid moisture or liquids entering the earcups.
- Avoid exposure to extreme temperatures and humidity.
- Avoid dropping or crushing the headphones; avoid bending the cable and subjecting it to excessive stress, pulling quickly or with too much force.
- Earwax buildup in the earcups may affect sound quality. Carefully remove it with a cotton swab or a similarly sized tool to improve sound quality.
- If you experience discomfort or pain, lower the volume or temporarily discontinue use of the headphones.
- If you experience persistent discomfort during product use, discontinue use and consult your doctor.
- It is recommended to handle the headphones with care and store them in a safe place when not in use.
