JLab Studio Pro Wireless Headphones

Warranty and Support

Your Warranty: All warranty claims are subject to approval by JLab Audio at its sole discretion. Keep your proof of purchase to ensure warranty coverage.

Contact Us: Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact

Register Today: Visit intl.jlabaudio.com/register for product updates, useful tips, and FAQs.

First Setup: Bluetooth Pairing

1. Turn on Bluetooth via your device's settings.

   [Illustration: Screenshot of device settings showing Bluetooth turned on.]

2. Press and hold the power button (Power) for approximately 8 seconds when the wireless Studio Pro headphones are turned off.

   The headphones search for available Bluetooth devices when the light blinks red and blue rapidly.

3. Tap 'JLab Studio Pro' in your device's settings menu to connect.

   [Illustration: Screenshot of device settings showing 'JLab Studio Pro' selected for connection.]

   When the headphones are connected (paired), this is confirmed by two beeps and a slow blue blinking light.

Pair New / Multiple Devices

Turn Bluetooth OFF on the device that was last connected, and turn Bluetooth ON on the new device you want to connect to. Repeat the FIRST SETUP procedure for all new devices.

Note:

• Bluetooth is a wireless radio technology, meaning it can be weakened or interfered with by objects or obstacles between the headphones and the connected device. The headphones are designed to be used within 10 meters (33 feet) of the connected device, without major obstacles in between (walls, etc.).
• Upon successful pairing, the headphones will remember your device and automatically connect the next time you turn them on. Only one device can be connected at a time. To connect another device, you must first disconnect the existing device via your device's Bluetooth settings.
• If the Bluetooth connection is lost, you can reconnect the Bluetooth device manually.

Button Functions

• VOLUME UP: Press once
• SEEK FORWARD: Press and hold 2+ seconds
• VOLUME DOWN: Press once
• SEEK BACKWARD: Press and hold 2+ seconds
• POWER ON / OFF: Press and hold 2+ seconds
• PLAY / PAUSE / ANSWER / END CALL: Press once
• REJECT INCOMING CALL: Press and hold 1+ second
• ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID): Press twice
• BLUETOOTH PAIRING: See FIRST SETUP

EQ Settings:

Press both buttons simultaneously (Studio Pro cycles through 3 EQ settings):

• JLab Signature (One Pip): JLab C3™ signature sound with enhanced vocals and bass.
• Balanced (Two Pips): Even sound without additional audio enhancements.
• Bass Boost (Three Pips): Enhanced bass and sub-bass.

Charging

Connect the USB Type C charging cable (included) to the headphones and the other end to a computer or a USB 5v/1amp power adapter (not included). Ensure the USB cable is connected to power.

• Red light indicates the headphones are charging.
• Blue light indicates charging is complete.

[Illustration: USB Type-C cable connected to headphones and a power source. Indicators: Red light for charging, Blue light for fully charged.]

Precautions

• Avoid getting moisture and liquid on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the headphones, pulling hard on or applying other extreme force to the cable, or bending the cable at a sharp angle.
• Wax can build up in the headphone cups, which can degrade sound quality. Gently remove wax with a q-tip or other small tool to improve sound quality.
• If you experience discomfort or pain, try turning down the volume or discontinuing use of the product for a period.
• If you experience persistent discomfort while using this product, discontinue use and consult a doctor.
• We recommend treating the headphones the same way you treat expensive sunglasses, and storing them in a safe place when not in use.

Resources

Buy Products | Product Alerts | Burn-in Your Headphones

JLab Audio + Burn-in Tool

Download on the App Store | Get it on Google Play

Visit us at: intl.jlabaudio.com