INSTALLATION Product Manual

Important Information & Safety Warnings

❓IMPORTANT INFORMATION! Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.

⚠️AVOID SCRATCHES! In order to avoid scratching this furniture, it should be assembled on a soft layer, like a rug.

?IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

⚠️ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT! It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months - in order to assure stability throughout the lifespan of the product. For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

Tools and Parts

?Please prepare the following tools:

When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.

Component Parts: 1 (Base), 2 (Drawer Side), 3 (Drawer Front/Back), 4 (Drawer Side), 6 (Drawer Bottom), 7 (Side Panel), 8 (Side Panel), 9 (Divider Panel), 10 (Bottom Panel), 11 (Feet), 12 (Leg Assembly), 13 (Back Panel/Support), 14 (Top Panel), 15 (Drawer Runners - mounted on side panels), 16 (Back Support).

Assembly Instructions

ASSEMBLED BY 2 ADULTS

⚠️A WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install Anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Step 1

Insert quickfit screws (A) to part 1. Fix handle (D) to part 1 using bolts (E), as shown.

Diagram shows screws (A) being inserted into part 1, and handle (D) attached with bolts (E).

Step 2

Attach parts 2 and 4 to part 3 using screws (C), as shown. Slide part 6 into the available slot of parts 2, 3, and 4, as shown.

Diagram shows drawer sides (2, 4) attached to drawer front/back (3) with screws (C), and drawer bottom (6) sliding into grooves.

Step 3

Insert cam locks (B) into parts 2 and 4 and attach part 1. Turn cam locks clockwise to tighten.

Diagram shows cam locks (B) inserted into parts 2 and 4, then connecting to part 1, and being tightened.

Step 4

Fix right inner drawer runner (DR) and left inner drawer runner (DL) to the assembled unit using screws (F), as shown.

Diagram shows drawer runners (DR, DL) being screwed (F) onto the sides of the main unit.

Step 5

Fix rail (CL) and (CR) to parts 7 and 8 respectively using screw (F) as shown. Insert quickfit screw (A) into parts 7 and 8 as shown.

Diagram shows rails (CL, CR) attached to side panels (7, 8) with screws (F) and quickfit screws (A).

Step 6

Fix rail (CR) to part 9 using screw (F) and insert quickfit screw (A) first. Flip the part to the back, fix rail (CL) and insert quickfit screw (A) as well.

Diagram shows rail (CR) attached to divider (9) with screw (F) and quickfit screw (A), then the part is flipped and rail (CL) is attached.

Step 7

Fix leg supports (J) to part 10 using screws (I), as shown.

Diagram shows leg supports (J) being screwed (I) onto the bottom panel (10).

Step 8

Fix part 11 (feet) by rotating clockwise to the leg support as shown. Fix part 12 (leg assembly) to part 10 and adjust feet (I) to leg 12 as shown.

Diagram shows feet (11) being attached to leg supports, and leg assembly (12) attached to bottom panel (10) with feet (I) adjusted.

Step 9

Attach part 13 to part 9 using long wooden dowel (V), insert cam lock (B) and turn clockwise to tighten, as shown.

Diagram shows part 13 attached to divider (9) with dowel (V) and cam lock (B).

Step 10

Fix part 16 to part 9 using screw (C), as shown.

Diagram shows back support (16) attached to divider (9) with screw (C).

Step 11

Attach another part 13 to part 9, turn cam lock (B) to tighten. Insert short wooden dowel (M) into one part 13 first. Attach part 8 to part 13 and 16, turn cam lock (B) to tighten, as shown.

Diagram shows part 13 attached to divider (9), then part 8 attached to parts 13 and 16 using dowel (M) and cam locks (B).

Step 12

Insert short wooden dowel (M) into another part 13 first. Attach part 7 to part 13 and 16, turn cam lock (B) to tighten, as shown.

Diagram shows part 7 attached to parts 13 and 16 using dowel (M) and cam locks (B).

Step 13

Insert screws (A) into part 14, as shown.

Diagram shows screws (A) being inserted into the top panel (14).

Step 14

Cover part 14 to the top using wooden dowel (M), and turn cam lock (B) to tighten, as shown.

Diagram shows top panel (14) being attached to the main structure using dowels (M) and cam locks (B).

Step 15

Insert wooden dowels (M) into the assembled unit. Attach part 10 into the assembled unit using screws (C), as shown.

Diagram shows dowels (M) inserted into the unit and bottom panel (10) attached with screws (C).

Step 16

Fix parts 15 (drawer runners) using screw (N) and square washers (O) into the assembled unit, as shown.

Diagram shows drawer runners (15) being attached to the side panels with screws (N) and washers (O).

Step 17

The drawer slides must be aligned with the internal rails, otherwise the drawer will tilt.

Diagram shows drawers being inserted into the chest, with an arrow indicating correct insertion.

Step 18

For extra stability, it is recommended that you fix your drawer to the wall using the additional hardware (C, P, Q, R), as shown. Should you choose not to affix the product to the wall, serious injury may be caused if the product tips over.

Please note: the maximum recommended weight for this is 5kg by drawer and 30kg in total. Please spread load evenly between the shelf and drawer. Your chest of 6 drawers is ready for use.

Diagram shows anti-tip hardware (C, P, Q, R, I) being used to secure the chest to a wall.

Warranty Information

WARRANTY CLAIMS

There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.

Before making a claim, please call to inquire. Provide your purchase order number and details of the problem for replacement parts. We will arrange within 48 hours. If out of stock, we will reply with a shipping date.

The product must be used in accordance with the instructions provided. For health reasons.

For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

Failure to follow the furniture instructions will invalidate the warranty. Attention please.

Does not include damage during installation, but includes damage during transportation.

Scope of responsibility

Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.

After using, the damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns Policy

CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?

PLEASE FOLLOW THE BELOW INSTRUCTIONS:

• If you have purchased and have simply changed your mind, follow the retailer's instructions for returns.

DEFECTIVE ITEMS

If your item is defective in any way, i.e. it doesn't work but you can't identify why, in the first instance, please call us.

DAMAGED ITEMS

If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.

In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.

AFTER-SALES CONTACT

✉️ feedbackstation@163.com

? (303)800-6387