Christmas Tree Assembly Instructions and Guide

Sincere Gratitude and Support

As a manufacturer, we are committed to providing complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, please contact us, and we guarantee complete satisfaction. Please attach your user name, order ID, where you purchased this product, and details of your problem. You can mark the broken/missing parts on the instruction book and take a photo to show us, so that we can assist you better.

Storage Instructions:

• Remove all holiday decorations.
• Gently press tips back into the center branch.
• Raise all branches to their original upright position, taking care not to place undue pressure on the attached ends of the branches.
• When disassembling the tree, a twisting motion will help to separate the sections from each other.
• All tree parts can be replaced in the carton and should be stored in a cool, dry place.

Note: After assembly, it takes 30 to 45 minutes to arrange the leaves. You will need to hang the decorations on the tree yourself.

Video Installation Guide

Dear customers, thank you for purchasing our Christmas series products! To ensure smooth assembly, we have provided video tutorials.

How to Find Assembly Videos:

1. Step 1: Scan the QR code to access the video library.Use your mobile phone camera or a QR code scanning tool to scan the QR code ? [QR Code].(Note: If QR code scanning fails, manually enter the link: https://www.youtube.com/@Christmas Decoration-VCD/videos)
2. Step 2: Search for the SKU code of your product.
   1. After entering the video library page, click the search bar ? at the top.
   2. Enter your product's SKU code (e.g., XMAS-TREE-2023) and press Enter.
   3. Locate the video matching your product name and click to play the complete assembly tutorial.

Notes:

• Ensure the entered SKU code is identical to the label on the product packaging (case-sensitive, pay attention to hyphens).
• Check your network connection. If the loading is slow, try refreshing the page.
• It is recommended to watch in high-definition video in a Wi-Fi environment to save mobile data.
• Product videos demonstrate assembly for the same or similar products. Assembly methods are identical even if product appearance differs.

Can't find the video?

1. Check if the SKU code was entered incorrectly.
2. Visit our customer service center at support@vingli.com and provide the SKU code. We will send you a direct link.

Important Notices

• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• If using other light products to decorate the Christmas tree, please use them safely.
• Do not use this product for other than its intended use.

Parts and Hardware

Hardware:

• BASE SCREW - 1 PC

Parts List:

• (A) TOP SECTION - 1 PC
• (B) MIDDLE SECTION - 1 PC
• (C) BOTTOM SECTION - 1 PC
• (D) BASE - 3 PC

Assembly Requirements: ? Ladder Required | ?‍?‍? 2 Person Assembly | ⏱️ Up to 10 Min Assembly

Note: Wires may come wrapped around frame pieces. Locate and unwrap wires before assembly.

Note: Please be careful at the connection. The interface at the top is different from other parts.

Product Assembly

Assemble the tree.

Note: Bottom section is wider than the middle section. Make sure sections are arranged in the correct order.

Diagram Description: The diagram illustrates the assembly of the tree sections. It shows how parts (A) Top Section, (B) Middle Section, (C) Bottom Section, and (D) Base connect. A separate note indicates: "Please remove the caps on the end of the poles before assembly."

Fluffing Instructions

For optimum appearance and satisfaction, this product MUST be fluffed according to the following directions.

Note: Start from the interior and work outward.

1. Find the innermost branch tips and bend them in a "V" shape.

   Diagram Description: Shows the initial bending of branch tips into a simple 'V' shape.

2. Open the next set of (3) branch tips with pointing outward, and one pointing up.

   Diagram Description: Shows branches opening further, with three tips pointing outwards and one upwards.

3. Open the next set of (4) branch tips with two pointing outward, and two in a wide "Y" shape.

   Diagram Description: Shows branches opening more, with four tips arranged in a wider 'Y' configuration.

4. Open the next set of (5) branch tips in a five-pointed "star" shape.

   Diagram Description: Shows the final fluffing stage, with branches opened into a five-pointed star shape for a full appearance.

Fluff Time Estimates

LED Instructions

Diagram Description: A stylized illustration of a Christmas tree is shown, with sections labeled A, B, and C. This indicates the general areas for light placement or arrangement. The text accompanying the diagram states: "Lighting control buttons and instructions are on the plug."