EcoFlow STREAM Microinverter Accessories
Installation and Connection Information
EcoFlow STREAM BKW-AC Cable
Applicable to: ⚡ EcoFlow STREAM Microinverter
This document outlines the connection and usage of the EcoFlow STREAM BKW-AC Cable. The BKW-AC Cable connects to the EcoFlow STREAM Microinverter. The connection process is illustrated through numbered steps (1-4) indicating specific connection points or stages.
Ensure correct and secure connection by checking the device status in the EcoFlow app. To disconnect the AC connector, press down the clip with a slotted screwdriver and pull the connectors apart.
EcoFlow STREAM Solar Panel Extension Cable
Applicable to: ⚡ EcoFlow STREAM Microinverter, ⚡ EcoFlow STREAM Pro, ⚡ EcoFlow STREAM Ultra
Details the EcoFlow STREAM Solar Panel Extension Cable, designed for connecting solar panels to various EcoFlow STREAM microinverter models. The Solar Panel Extension Cable connects to the PV terminal of the STREAM device. The connection is shown in two steps (1-2).
Connect the cable to the PV terminal of your STREAM device. The number of cables required depends on your specific solar connection needs.
Important Safety Note: Never connect the leads of a solar panel to different PV terminals (e.g., negative to PV1- and positive to PV2+) to prevent short circuits.
To reconnect the PV terminals, use a PV wrench and pull the connectors apart.
EcoFlow STREAM BKW DIY Cable
Applicable to: ⚡ EcoFlow STREAM Microinverter
Warning: QUALIFIED ELECTRICIAN REQUIRED
This section covers the EcoFlow STREAM BKW DIY Cable, which requires installation by a qualified electrician. The BKW DIY Cable connects to the EcoFlow STREAM Microinverter. The connection process is illustrated through numbered steps (1-5) indicating specific connection points or stages.
Ensure correct and secure connection by checking the device status in the EcoFlow app. To disconnect the AC connector, press down the clip with a slotted screwdriver and pull the connectors apart.
EcoFlow PV Clamp Holder
Applicable to: ⚡ EcoFlow STREAM Microinverter
Information on the EcoFlow PV Clamp Holder, used for mounting solar panels. The PV Clamp Holder is shown in three steps (1-3), illustrating its form and application with an M6 screw for panels 30-35 mm thick.
Designed for solar panel frame thickness of 30-35 mm.
Utilizes an M6 screw for secure fastening.
