EcoFlow STREAM Solar Panel Extension Cable
Applicable Models
- EcoFlow STREAM Microinverter (used as the example product in this guide)
- EcoFlow STREAM Pro
- EcoFlow STREAM Ultra
Connection Overview
The diagram illustrates the process of connecting solar panels to an EcoFlow STREAM device. It depicts a house structure containing the EcoFlow STREAM unit. Cables originate from the STREAM device's PV input ports, marked with an upward arrow labeled '1', and extend towards the right. On the right side of the illustration, two solar panels are shown connected to a terminal block. An arrow labeled '2' indicates the connection path from this terminal block to the STREAM device.
Connection Instructions
- ? Connect the cable to the PV terminal of your STREAM device. The actual number of cables required depends on your solar connection needs.
- ❌ Never connect the leads of a solar panel to different PV terminals (e.g., negative to PV1- and positive to PV2+) to prevent short circuits.
- ⚙️ To disconnect the PV terminals, use a PV wrench and pull the connectors apart.
