STRONG SRT 8215

Installation Instructions

This document provides installation instructions in multiple languages, starting with English.

Key features indicated by icons:

• ? USB recording
• 700 channels
• ? Programme guide (EPG)
• ? Teletext function
• ? Parental control
• ? RSS Feeds

DVB-T2 High Definition

Dolby Audio

Supported technologies include DV3T2, HDMI, HEVC, Advance, and Dolby Audio.

Visit: www.strong.tv

Product Overview

Fig. 1: Receiver Top View

Diagram shows the top of the STRONG SRT 8215 receiver with numbered components.

Fig. 2: Receiver Rear Panel

Diagram shows the rear panel with numbered ports:

• 1. ANT IN: Antenna input for terrestrial signals.
• 2. ETHERNET: RJ-45 port for RSS feeds and weather information.
• 3. HDMI: Port for connecting to a TV via HDMI cable.
• 4. AUDIO L/R: Audio output for connecting to an analog amplifier or receiver (using 2 x RCA).
• 5. TV SCART: Port for connecting to a TV via SCART cable.
• 6. 12V Power Input: For connecting the 100-240V AC ~ 50/60 Hz to 12V DC / 1A power adapter.

Fig. 3: Remote Control

The remote control has the following numbered buttons:

• 1. [POWER Button] ?: Turns the receiver ON or puts it into Standby mode.
• 2. [MUTE Button] ?: Mutes all audio outputs.
• 3-9: Number buttons for direct channel input or menu navigation.
• 4. [FAV Button]: Opens the favorites group selection.
• 5. [Back Button]: Moves one step back in menus or returns to the previous channel.
• 6. [INFO Button]: Displays information about the current channel and event. Pressing twice shows technical details like signal level and quality.
• 7. [EPG Button] ?: Opens the Electronic Program Guide (EPG) in TV mode.
• 8. [Channel Up/Down Buttons] ▲▼: Changes channels.
• 9. [Volume Up/Down Buttons] ▲▼: Adjusts audio volume.
• 10. [OK Button]: Confirms selections or opens the channel list.
• 11. [MENU Button]: Opens the main menu.
• 12. [Exit Button]: Exits menus or submenus.
• 13. [Pause Button] II: Pauses playback or starts Time-Shift function.
• 14. [Rewind Button] ◀◀: Fast rewind.
• 15. [Fast Forward Button] ▶▶: Fast forward.
• 16. [Record Button] ?: Starts recording the current program.
• 17. [Media Button]: Opens the multimedia playback menu.
• 18. [Stop Button] ▶|: Stops playback.
• 19. [Colored Buttons]: Used for specific functions in various menus (e.g., RED, GREEN, YELLOW, BLUE).

Fig. 4: Battery Installation

Instructions for installing two AAA batteries into the remote control, emphasizing correct polarity.

Fig. 5: Remote Control Usage

The remote control should be pointed towards the front of the receiver. It operates within a range of approximately 5 meters and an angle of up to 30 degrees.

Connections

The following connection diagrams are provided:

Fig. 6: Basic Connections

Shows connecting an antenna via coaxial cable to ANT IN, an HDMI cable to the TV, and a SCART cable to the TV. Also illustrates connecting a USB device and the power adapter.

Fig. 7: Ethernet Connection

Illustrates connecting the receiver to a router using an Ethernet cable.

Fig. 8: HDMI Audio/Video Setup

Shows connecting the receiver to a TV and speakers using HDMI cables for high-quality audio and video output.

Service Center

Contact information for STRONG support is provided for various regions:

• AT: support_at@strong.tv, 0820 400 150
• FR: support_fr@strong.tv
• BG: support_bg@strong.tv, +359 32 634451
• IT: support_it@strong.tv, 199 404 032
• CEE: support_hu@strong.tv, +36 1 445 26 10
• NL: support_nl@strong.tv
• DE: support_de@strong.tv, 0180 501 49 91
• PL: support_pl@strong.tv, 801 702 017
• DK: support_dk@strong.tv
• UA: support_ua@strong.tv, +380 (44) 238 61 50

Supplied by STRONG AUSTRIA

Represented by STRONG Ges.m.b.H
Teinfaltstraße 8/4.Stock
A-1010 Vienna, Austria
Email: support_at@strong.tv

Document last updated: 18 Oct 2021 20:07

Summary of Detailed Manual Content (Greek Sections)

The following sections, primarily in Greek, provide in-depth information on the receiver's operation:

Safety and Handling (Section 1.1, 1.2)

Details on safe placement, avoiding environmental hazards, proper storage, and handling precautions.

Equipment Setup (Section 1.3)

Guidance on connecting the receiver, including using HDMI and SCART cables, and understanding menu symbols.

Accessories (Section 1.4)

Lists included accessories such as the remote control and batteries.

USB Device Usage (Section 1.5)

Information on using USB storage devices for media playback and recording, including compatibility and formatting.

Receiver Description (Section 2.0-2.3)

Detailed descriptions of the front and rear panel interfaces and the default PIN (0000).

Remote Control Operation (Section 2.4-2.6)

Instructions on using the remote control, including battery installation and button functions.

Connections (Section 3.0-3.7)

Comprehensive guide on connecting the receiver to terrestrial antennas, TVs (HDMI, SCART), USB devices, Ethernet for network features (RSS, weather), and home entertainment systems.

First-Time Setup (Section 4.0)

Walkthrough of the initial setup wizard, including selecting region, language, and performing channel scans.

Quick Start Guide (Section 5.0)

A brief overview of basic operations for users eager to start using the receiver.

Operation (Section 6.0-6.7)

Covers changing channels, accessing information (INFO), selecting audio languages, using Teletext, EPG, subtitles, recording, time-shifting, and media playback.

Main Menu (Section 7.0)

Overview of the main menu structure: Installation, Channels, System Settings, Media, and Network.

Channel Installation (Section 7.1)

Details on manual and automatic channel scanning, country selection, antenna power settings, and scan modes.

Channel Editing (Section 7.2)

Managing TV and radio channel lists, including creating favorites, reordering channels, locking channels with PIN, and deleting channels.

System Settings (Section 7.3)

Configuration options for display, time zone, audio/video output, network settings, timers, parental controls, and screen menu behavior.

Media Playback (Section 7.4)

Instructions for playing video, audio, and image files from a connected USB device.

Tools (Section 7.5)

Accessing system information, resetting to factory defaults, network IP settings, RSS feed configuration, weather information, and USB device management.

USB Upgrade (Section 7.6)

Procedure for updating the receiver's firmware via a USB drive.

Troubleshooting (Section 8.0)

A table listing common problems, their potential causes, and recommended solutions.

Technical Specifications (Section 9.0)

Detailed technical data including tuner, demodulator, input signal requirements, power, operating environment, and supported media formats.