Reedog PATPET T800 PRO Wireless Fence User Manual

Conditions of Use

• Verify the fit to avoid excessive pressure, follow the instructions in this manual.
• Never attach a leash to the collar; it causes excessive pressure on the contacts.
• Every week, wash the dog's neck area and the collar's metal contact points with a damp cloth.
• For your dog's comfort, place silicone covers on the contact points.
• Not suitable for aggressive dogs.
• The collar is not a toy; keep it out of the reach of children.
• Ensure your dog is healthy before using the collar. If in doubt, consult your veterinarian.
• When the collar is on, the human body should not directly touch the product's contact points.
• If a rash or soreness appears at the contact points, discontinue use.
• Use the product until the skin heals.
• The collar should not be worn for more than 12 hours a day and should be checked every 1 or 2 hours.
• This product is suitable for dogs weighing over 3 kg and over 6 months old.
• Long hair around the dog's neck can be trimmed, but complete shaving is not recommended.
• Do not use the collar while playing with your dog.
• Do not remove the collar's battery cover.

Visit us at: www.reedog.es | www.electro-collares.es

Package Contents

1. Transmitter
2. Collar with receiver
3. USB-C charging cable
4. Short contact points
5. Long contact points
6. Test lamp
7. Wrist strap
8. User manual

Visit us at: www.reedog.es | www.electro-collares.es

Product Description - Transmitter

Transmitter Components:

• TFT Display
• Up/Down Buttons
• Impulse Button
• Sound Button
• Dog 1/2/3 Button
• Charging Port
• Wrist Strap
• Lock Button
• Settings Button
• Vibration Button

Transmitter Display: The display shows the current mode (Fence, Training, Bark Collars), dog selection, fence level, sensitivity, and battery status.

Visit us at: www.reedog.es | www.electro-collares.es

Transmitter Screen Examples

• Fence Mode: Shows Dog 1, Fence ON/OFF, Mode, Fence Level.
• Training Mode: Shows Dog 1, Training, Mode, Fence Level, and battery status.
• Bark Collars Mode: Shows Dog 1, Bark Collars, Mode, Sensitivity, and battery status.

System Description:

• Selected Dog: Indicates which dog profile is active (e.g., Dog 1).
• Real-time Tracking: Provides status updates.
• Radio Battery Status: Shows the battery level of the transmitter.
• Receiver Battery Status: Shows the battery level of the collar receiver.
• Selected Function: Indicates the currently active function (Fence, Training, Bark Collar).

Visit us at: www.reedog.es | www.electro-collares.es

Receiver

Receiver Components:

• Collar Strap
• Buckle
• LED Indicator
• Charging Port with Cover
• Contact Points
• On/Off Button

LED Indicator Signals:

• Slowly flashing white LED: Receiver is charging.
• Solid white LED: Receiver is fully charged.
• Flashing once every 5 seconds: Receiver is functioning normally.
• Flashing white LED: Sound/Vibration/Pulse mode is active.

Visit us at: www.reedog.es | www.electro-collares.es

Getting Started

Charge completely before first use.

1. Charge the Transmitter: Use the included Type-C charging cable. The battery status icon shows moving bars during charging and solid bars when fully charged. It will automatically turn on when the charging cable is disconnected.
2. Charge the Receiver: Use the included Type-C charging cable. The white LED will flash slowly during charging and stay solid when fully charged. It will automatically turn on when the charging cable is disconnected.

Visit us at: www.reedog.es | www.electro-collares.es

Turning the Product On/Off

If no action is taken, the collar will automatically switch to training mode.

• To turn on the transmitter: Briefly press the lock button to turn it on; press and hold the lock button to turn it off.
• Turning on the receiver: Briefly press the On/Off button to turn it on. The device will beep and vibrate once. Press and hold the power button to turn it off. The device will emit two beeps and vibrate twice.

To activate test mode: Press the power button, the number 0 will appear on the screen. Then, imitate a dog's bark into the microphone sensor located on the back of the collar receiver.

How to Switch Between Functions

Press and hold the Settings button to enter function switching mode, then briefly press the Settings button to select one of the 3 functions: training collar, anti-bark collar, or fence.

Function Display Examples:

• Dog 1 Training Mode: Shows Dog 1, Training, and status.
• Dog 1 Bark Collars Mode: Shows Dog 1, Bark Collars, Mode, and Sensitivity.
• Dog 1 Fence Mode: Shows Dog 1, Fence ON/OFF, Mode, and Fence Level.

Visit us at: www.reedog.es | www.electro-collares.es

How to Pair the Transmitter with the Receiver

Before using the training and fence functions, the transmitter and receiver must be paired correctly. One transmitter can be paired with up to 3 receivers.

1. Turn on the transmitter and switch to training mode.
2. Press and hold the Dog 1/2/3 button on the remote to enter channel switching mode, then briefly press the button to change channels.
3. Turn off the receiver and press and hold the power button for 3-5 seconds. The receiver will vibrate and enter pairing mode. The LED indicator will flash for 15 seconds.
4. Within the next 15 seconds, press the Sound/Vibration button on the transmitter. A beep will confirm pairing. Once paired, the transmitter will display the receiver's battery level. (Repeat the above steps after the timeout).

Pairing Process Visual: The diagram shows the transmitter and receiver being brought close together for pairing.

Visit us at: www.reedog.es | www.electro-collares.es

How to Use the Fence

By default, the fence function is disabled.

Turning On and Off: After entering the fence function, select the desired channel for the dog and then briefly press the lock button to enable or disable the function.

Fence Mode Display: Shows Dog 1, Fence ON/OFF, Mode, and Fence Level.

Note: Because this function consumes more power, turn it off when not in use. To adjust the fence range level, use the up and down buttons to adjust the level from 1 to 8.

Note: Each dog can have a different adjustment level. Before adjusting the level, first select the corresponding dog channel.

Visit us at: www.reedog.es | www.electro-collares.es

Fence Function Details

The effective maximum distance is in an open environment. In real-use conditions, obstacles or signal interference may reduce the range. Test the device in your environment as actual performance may vary.

Alert Configuration: The default setting is vibration. Briefly press the vibration button or the pulse button to switch modes. When the dog crosses the boundary, the collar will activate an alert and automatically increase the intensity from level 1 to 6. The transmitter will immediately emit an audible reminder, and the corresponding dog fence icon will flash slowly.

Note: You can also briefly press the sound button to prevent the collar from emitting an alert when the dog leaves the permitted fence radius. The transmitter will issue an alert, and the owner must manually recall the dog.

How to Use the Training Function

Level Adjustment: After accessing the training function, select the desired channel for your dog and briefly press the Settings button to cycle through sound, vibration, and pulse modes. Use the up/down buttons to adjust the sound, vibration, and pulse levels.

Alert Types:

• Sound Alert: Briefly or long-press the Sound button to emit an alert: 8 sound levels, each with a different tone.
• Vibration Alert: Briefly or long-press the Vibration button to emit a vibration alert: 8 vibration levels, with higher levels indicating stronger vibrations.
• Pulse Alert: Briefly press or hold the Pulse button to emit a pulse alert (16 pulse levels, higher levels indicate a stronger pulse).
• Pulse Lock/Unlock: Briefly press the lock button to lock/unlock the pulse mode.

Visit us at: www.reedog.es | www.electro-collares.es

How to Use the Anti-Bark Collar

By default, the collar is configured for automatic warning.

How to Turn the Anti-Bark Collar On/Off:

After activating the anti-bark collar function, select the desired dog channel and then briefly press the lock button to activate or deactivate the function.

Warning Mode Selection: Ensure the anti-bark collar is activated. Briefly press the vibration or static button to select vibration or pulse mode. Tips: After activating the warning mode, the level will automatically increase from 1 to 6; higher levels will provide stronger warnings.

Sensitivity Level Adjustment: Use the Up/Down buttons to adjust the sensitivity level from 1 to 5, with higher levels being more likely to activate.

Real-Time Tracking

This function is effective up to an approximate distance of 180 meters from the transmitter. Beyond this distance, the information will not be displayed.

Tracking Status Examples: Standing, Walking, Running, Jumping.

Visit us at: www.reedog.es | www.electro-collares.es

How to Install Contact Points

1. Attach the contact points.
2. Take the test lamp.
3. Tighten the contact points using the test lamp.

How to Use the Test Plug

Ensure the contact points are installed correctly and the device is paired. Activate the training function and unlock the impulse mode. Place the test lamp on the contact points and press the pulse button. If the test lamp lights up, it means the pulse (static stimulation) is working correctly.

Test Result Visual: Diagram shows correct (green checkmark) and incorrect (red X) placement of the test lamp on contact points.

Visit us at: www.reedog.es | www.electro-collares.es

How to Assemble a Collar

1. Pass the strap through the receiver.
2. Pass the strap through the buckle.
3. Pass the excess strap through the silicone ring.

Visit us at: www.reedog.es | www.electro-collares.es

How to Put a Collar on Your Dog

Ensure the product is snug but loose enough for one finger to fit between the collar and your dog's neck. Place the receiver in the center of the neck with the power button facing up and the contact points flush with the neck.

Note: If your dog has long hair, it may be necessary to trim the hair around the metal contact points and use longer metal contact points. The excess strap can be cut off.

Safety Precautions for Collar Use

1. Avoid wearing the collar for prolonged periods or too tightly to prevent skin irritation on your dog.
2. Ensure your dog does not wear the collar for more than 12 hours a day.
3. Adjust the collar's position on your pet's neck every 1 or 2 hours.
4. Periodically check that the collar is snug to prevent excessive pressure.
5. Do not attach the leash to the collar to avoid unnecessary pressure on the device.
6. Clean your pet's neck area and the receiver's contact area with a damp cloth every week.
7. Check the contact area daily for signs of rash or discomfort.
8. If you notice a rash or discomfort, stop using the collar until the skin has healed. If symptoms persist for more than 48 hours, seek veterinary attention immediately.

Visit us at: www.reedog.es | www.electro-collares.es

Approvals and Contact Information

The device has been approved for use in EU countries.

CE Marking. All necessary documentation is available on the web.

Website: www.electro-collares.es

All rights reserved. Changes in technical parameters, features, and printing errors are reserved.

Service and Distribution Center:

Reedog, s.r.o.

Apartment of seven rooms 459/8

101 00 Prague 10

Phone: +420 +34900963443

Email: info@reedog.es