Reedog PATPET 502 User Manual

Main Functions

• Range up to 800 m.
• The receiver is equipped with a flashing LED light to facilitate training and locating your dog.
• The flashlight is designed for night illumination.
• Various dog training modes, adjustable, allowing users to choose the appropriate training level for dogs based on their different sizes and sensitivities.
• Up to 3 dogs can be trained with a single transmitter (additional receiver must be purchased separately).

Receiver Description

• Light: Flashing LED for training and locating.
• Electrodes: For contact with the dog's fur.
• Charging Port: For charging the receiver.
• Power On/Off Button: To turn the receiver on and off.

Transmitter Description

• Display: Shows current settings and battery status.
• Correction Level Adjustment: Buttons to increase (+) or decrease (-) the intensity of the correction.
• LED Indicator Light: Provides visual feedback on the transmitter's status.
• Collar Light: Activates a light on the collar.
• Impulse: Delivers an electric stimulation.
• Vibration: Delivers a vibration.
• Sound: Emits a tone.
• CH Buttons: Selects the dog channel (CH1, CH2, CH3).

Usage

Charging

• Receiver Charging: The receiver needs charging when its light blinks red 5 times every 12 seconds. Use a micro USB cable and a DC5V output voltage. Charging takes up to 2 hours. Do not charge near flammable substances. The light is red while charging and blinks green when fully charged.
• Transmitter Charging: The transmitter needs charging when its indicator light blinks red 5 times every 2 seconds, and a single battery line icon appears on the screen.

Powering On/Off

• To Power On: Press and hold the power button for 3 seconds. The two blue lights will flash for 3 seconds, and the collar will vibrate. A green light blinks once every 10 seconds when the collar is on.
• To Power Off: Press and hold the power button for 3 seconds. The two lights will flash 3 times, and the collar will vibrate.

Pairing

• Press any button to turn on the transmitter.
• Select the desired channel (CH1, CH2, or CH3) by pressing the CH button on the transmitter.
• Adjust the level by pressing the + and – buttons, ensuring the level is above 00.
• Turn on the collar, then press the collar's power button 3 times in a row. The collar's indicator light will flash red, indicating it is in pairing mode.
• Press any of the correction buttons (sound, vibration, or pulse) on the transmitter to complete the pairing. If pairing is successful, the collar's LED will turn blue and emit a double beep.
• If you have additional collars, select another channel and repeat the above steps.

Sending Impulses, Vibrations, and Sounds

• Sending Impulses: The impulse can be sent for up to 10 seconds. Adjust intensity using the 'Increase' and 'Reduce' buttons.
• Sending Vibrations: Vibrations can be sent for up to 15 seconds. Adjust intensity using the 'Increase' and 'Reduce' buttons.
• Sending Sound: Sound can be emitted for up to 15 seconds. There are 3 different sound ranks. Adjust using the 'Increase' and 'Reduce' buttons.

Sending Light to the Collar

• Mode 1: Pressing the light button makes the collar light flash green for up to 10 minutes. Pressing the button again turns off the light.
• Mode 2: Pressing the light button makes the collar light flash blue and red for up to 10 minutes. Pressing again turns off the light.
• Mode 3: Pressing the light button makes the collar light flash violet for up to 10 minutes. Pressing again turns off the light.

Transmitter Tips

• To activate the transmitter, press any button.
• The backlight is active for 20 seconds after pressing a button. The backlight then disappears, but functions are constantly displayed on the transmitter screen.
• Battery Saving Mode: After one minute, the transmitter enters standby mode, and no functions are visible on the transmitter screen.

Compliance and Service

• The device has been approved for use in EU countries and carries the CE mark. All necessary documentation is available on the website: www.reedog.ro.
• Technical parameters, features, and typographical errors are subject to change.
• Service and Distribution: Reedog, s. r. o., Sedmidomky 459/8, 101 00 Prague 10, Czech Republic. Tel: +420 216 216 106, E-mail: info@reedog.ro.