Reedog T800Pro Wireless Dog Fence and Collar User Manual

Important Safety Information

• This product is not suitable for aggressive dogs. Consult a veterinarian or trainer if unsure.
• Do not test this product directly on humans, as it violates local regulations.
• Ensure safety when training on a leash by using a strong leash and being physically capable of restraining the dog.
• Take precautions to avoid skin damage.
• Avoid connecting the receiver's audio to your dog's computer.
• Turn off or remove the receiver before playing with your dog.
• Store the product away from stoves and high temperatures.
• Do not open the product casing to prevent lithium leakage or fire risk.

Components

Overview

Transmitter

TFT Screen: Displays information.

Up/Down Buttons: Adjust settings.

Impulse Button: Delivers static stimulation.

Sound Button: Delivers tone warning.

Dog Selection Button: Selects the dog (1/2/3).

Charging Port *: For charging the transmitter.

Wrist Strap Hole: For attaching the wrist strap.

Lock Button: Locks/unlocks the transmitter.

Mode Button: Cycles through functions (Training, Anti-bark, Fence).

Vibration Button: Delivers vibration warning.

Transmitter Screen

• Fence Mode: Shows fence status, level, and dog selection.
• Training Mode: Shows training level and dog selection.
• Anti-bark Collar Mode: Shows mode, sensitivity, and dog selection.
• Selected Dog: Indicates which dog is currently active (1/2/3).
• Real-time Status: Shows battery status for transmitter and receiver, and active function.

Receiver

Strap: Adjustable strap for the dog's neck.

Buckle: Secures the strap.

On/Off Button: Powers the receiver on/off.

LED Indicator: Shows status (charging, fully charged, operating, active mode).

Charging Port (with cover): For charging the receiver.

Contact Points: Deliver stimulation.

Receiver LED Indicator

Instructions

Step 1: How to Charge

Tip: Fully charge the battery before use!

Charging the Transmitter: Use the provided Type-C cable. The battery icon shows animated bars during charging and full bars when fully charged. It turns on automatically after unplugging the charging cable.

Charging the Receiver: Use the provided Type-C cable. The white LED flashes slowly during charging and shows a solid light when fully charged. It turns on automatically after unplugging the charging cable.

[Image: Transmitter and Receiver charging]

Step 2: How to Turn On/Off

Transmitter: Short press the lock button to turn on. Long press the lock button (hold for 3 seconds) to turn off.

Receiver:

1. Short press the on/off button to turn on. The device will emit one beep and vibrate once.
2. Press and hold the on/off button for 3 seconds to turn off. The device will emit two beeps and vibrate twice.

[Image: Short press vs. Long press on receiver]

Step 3: How to Switch Between Three Functions

Press and hold the mode button to enter function switching. Then, short press the mode button to select one of the three functions: dog training, anti-bark collar, and fence.

[Image: Transmitter screen showing different modes: Training, Anti-bark, Fence]

Step 4: How to Pair the Remote with the Receiver

Successful pairing before starting training.

Turn on the transmitter and switch to the training function. Long press the dog 1/2/3 button on the transmitter to switch channels, then short press the button to change the channel. Turn off the receiver and long press the on/off button for 3-5 seconds. The receiver will vibrate and enter pairing mode, with the LED flashing for 5 seconds. Within 15 seconds, press the tone/vibration button on the transmitter; a beep will confirm successful pairing. After pairing, the transmitter will display the receiver's battery level. (Repeat the above steps if the time limit is exceeded.)

[Image: Pairing process showing transmitter and receiver]

Step 5: How to Use the Fence

Tip: The default setting has the fence function turned off.

Turning On and Off: After entering the fence function, select the desired dog channel, then short press the lock button to turn the function on or off.

[Image: Transmitter screen showing Fence mode ON and OFF]

Note: As this function consumes more energy, turn it off when not in use.

Adjusting the Fence Radius: Use the up/down buttons to adjust the level from 1 to 8.

Note: Each dog may have a different setting level. Select the appropriate dog channel before setting the level.

Please choose the appropriate setting based on the actual usage of the device by the user.

The data above shows the maximum effective distance in an open environment. In actual usage conditions, obstacles or signal interference may reduce the range. Test the device in your own environment, as actual performance may vary.

Adjusting the Warning Mode: Press the vibration or static button to directly switch modes. When the dog crosses the boundary, the collar will issue a warning and automatically increase the signal intensity from level 1 to 6. The transmitter will immediately emit a reminder sound, and the fence icon corresponding to the dog will flash slowly.

Note: You can also short press the sound button so the collar does not issue a warning when the dog leaves the fence. The transmitter will still emit a sound, and the owner must manually trigger the warning to recall the dog.

Step 6: How to Use the Training Function

Adjust Levels: After entering the training function, select the desired dog channel, then short press the mode button to switch between tone, vibration, and static signal modes. Use the up/down buttons to adjust the level of tone, vibration, and static signals.

[Image: Transmitter screen showing Training mode with levels]

Tone Warning: Short or long press the "beep" button to issue a tone command (8 levels of tone, each with a different pitch).

Vibration Warning: Press and hold the vibration button to emit a vibration command (levels 1-8, higher levels mean stronger vibrations).

Static Stimulation Warning: A short or long press of the impulse button sends static stimulation commands (levels 1-16, higher levels result in stronger impulses).

Lock/Unlock Static Stimulation: Short press the lock button to lock/unlock the static stimulation mode.

Step 7: How to Use the Anti-bark Mode

Tips: The collar is set to automatic warning.

Turning the Anti-bark Collar Mode On or Off: Select the desired dog channel for the anti-bark collar function, then short press the lock button to turn this function on or off.

Selecting the Warning Mode: Ensure the anti-bark collar mode is on, then short press the vibration or static button to select vibration or static warning mode. Tips: After activating the warning mode, it will automatically proceed from level 1 to 6, with higher levels providing stronger warnings.

Adjusting Sensitivity Level: Use the up/down buttons to adjust the sensitivity level, choosing from levels 1 to 5, with higher levels being more prone to triggering.

Tips: The warning in anti-bark mode will not be triggered if the dog crosses the boundary, but the fence warning will be activated.

[Image: Transmitter screen showing Anti-bark mode settings]

Step 8: Real-time Monitoring

Tips: This function is effective within a radius of approximately 180 meters from the remote. Beyond this distance, it will not be displayed.

[Icons representing: Stay, Walk, Run, Jump]

Step 9: How to Install Contact Points

[Image: Installing contact points and tightening contact points]

Install contact points

Tighten contact points

[Image: Test light]

Take test light

Step 10: How to Use the Test Light

Tip: Check that the contact points are installed correctly and the device is paired.

Ensure the training function is on and the static stimulation mode is unlocked. Place the test light on the contact points and press the static button. If the test light turns on, it means the static stimulation is working correctly.

[Image: Test light showing correct and incorrect stimulation]

Step 11: How to Assemble the Strap

Step 1: Thread the strap through the receiver.

Step 2: Thread the strap through the buckle.

Step 3: Thread the excess strap through the silicone ring.

[Image: Diagram showing how to assemble the strap]

Step 12: How to Put on the Collar

Turn off the receiver and ensure the dog is in a comfortable position before putting on the collar.

Place the receiver in the middle of the dog's neck, with the switch facing upwards and the contact points aligned with the throat.

Ensure you can freely slide a finger between the collar and the dog's neck. Proper fit is crucial for the device's effectiveness.

Mark the desired collar length with a pen, remove excess material, and carefully secure the cut edges with a lighter to prevent fraying.

[Images: Dog standing, correct collar placement, incorrect collar placement, checking fit, trimming excess strap]

Wearing Precautions

1. To prevent skin irritation in dogs, avoid prolonged or tight wearing of the collar.
2. Ensure the dog does not wear the collar for more than 12 hours daily.
3. Adjust the collar's position on your pet's neck every 1-2 hours.
4. Regularly check that the collar is securely fastened to prevent excessive pressure.
5. Do not attach a leash to the collar to avoid excessive pressure on the device.
6. Once a week, clean the neck area and the receiver area of your pet with a damp cloth.
7. Check the contact area daily for signs of rash or discomfort.
8. If you notice a rash or discomfort, discontinue use until the skin heals. If symptoms persist for more than 48 hours, seek veterinary assistance immediately.

Follow the steps below to ensure your pet's safety and comfort. While millions of pets find the stainless steel contacts comfortable, some may be sensitive to pressure. Over time, your pet may become more tolerant of the collar, allowing you to relax some precautions. However, it is important to regularly check the contact area for redness or sores. If any are found, discontinue use until the skin has fully healed.

Frequently Asked Questions

Problem: Transmitter/Receiver Cannot Be Charged

• Problem: Charging cable does not fit. Solution: Use the charging cable included with the device (5V, 1A).
• Problem: Charging cable is damaged. Solution: Replace the charging cable and try again.

Problem: Product Not Used for a Long Time

• If the product remains on the skin and is not used for a long time, it will lose power. Please turn it on each time it is used.
• If the device is not used for a long time, refer to the charging instructions before charging and use.

Problem: Product Does Not Work

• Problem: Product enters low power protection mode. Solution: The battery must be charged. Connect the charging cable and fully charge the battery.
• Problem: Cannot turn it on. Solution: Test after charging.
• Problem: Remote and receiver are not paired well. Solution: Repair the remote with the receiver.

Problem: Dog Bites the Device, Damaging It

• Dogs should not see or reach for the device they are wearing.

Problem: Product Does Not Turn On

• Problem: No display/sound signal. Solution: Check if the touch is normal; lack of response means the key is damaged. Recharge.
• Problem: Product enters low power protection mode. Solution: Connect the charging cable and wait for charging.
• Problem: Incorrect activation method. Solution: Long press the power on/off button.

Problem: No Static Stimulation/No Vibration

• Problem: Static level is set too low or static stimulation is locked. Solution: Increase the level or unlock static stimulation and try again.
• Problem: Vibration level is set too low. Solution: Adjust to a high vibration level and try again.
• Problem: Battery is weak. Solution: Fully charge the receiver.
• Problem: Dog's fur is too long. Solution: Adjust the device so that the contact points touch the dog's skin.
• Problem: Collar is too loose. Solution: The receiver is worn on the dog's neck, with a finger's width gap between the collar and the neck.

Problem: Collar is Easy to Put On and Not Tight Enough

• Problem: Collar is too loose. Solution: Place the receiver in the middle of the dog's neck, leaving a finger's width gap between the collar and the neck.
• Problem: Excess has not been trimmed on the collar during the first use. Solution: The collar straps should be properly tightened in each buckle so that the collar fits snugly against the dog's neck, and then the excess should be trimmed.
• Problem: Collar strap is damaged and needs replacement. Solution: Information on wearing the collar can be found in the user manual.

Problem: Distorted Characters on the Remote Display

• Problem: Low battery level. Solution: Use after fully charging.

Problem: Device Cannot Be Used Violently

• This type of damage is not covered by warranty. Keep the transmitter and receiver out of the dog's sight when not in use.
• If, after receiving the device, the characters on the display are unclear, contact customer service for repair or replacement.

Problem: Dog's Skin is Irritated

• Problem: Worn for too long. Solution: Do not wear for more than 12 hours and check every 2 hours.
• Problem: If the device is worn when the dog is wet or swimming, the static stimulator irritates the skin. Solution: Keep the dog's neck dry and clean, do not wear the product while swimming or playing with the owner. Use silicone caps to reduce friction of the contact points.
• Problem: Dog has a rash. Solution: Discontinue use of the product for a few days. If the condition persists for more than 48 hours, consult a veterinarian for assistance.
• Problem: Dog is less than 6 months old. Solution: The animal should be at least 6 months old before starting to use the training collar, and the dog should be able to recognize basic obedience commands such as "sit" or "stay."

Problem: Lack of Accessories, Damaged Accessories, etc.

• Problem: Damaged during transport or incorrect packaging. Solution: Contact customer service to initiate repair/return. Photos or videos may be required.

Problems with Product Compatibility

• The remote and receiver must match. If you buy a remote or receiver from another manufacturer, it will not work with our product. Solution: Purchase the same model from us to pair it.

Safety of Vibration/Static

• Continuous use of vibration and static should not exceed 30 seconds. The dog training collar requires user interaction and animal training to achieve the desired effect.
• Our vibration and static functions have been tested on various dog breeds over a long period.

Remote Range is Not Consistent

• The actual remote range may vary depending on terrain, weather, vegetation, battery capacity, and interference from other devices. Solution: Change location and try training in a place with fewer obstacles.

Product Does Not Change Dog Behavior

• The training collar for dogs is a product that assists in training, requiring user interaction and animal training to achieve the desired effect. Solution: Seek training support from a professional dog trainer. Proper training time. The training course should be active and short, with the effect of reinforcement lasting about 10-15 minutes each time.

Compliance

Indicates CE certification, guaranteeing compliance with local regulations of the European Economic Area (EEA).

Indicates that the electromagnetic interference of the device is lower than the limit approved by the Federal Communications Commission (FCC).

Packaging materials should be disposed of according to type. Cardboard and paper can be recycled as waste paper, while packaging should be recycled appropriately.

The system is intended for EU countries and others where the categorical collection of recyclable materials is possible.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this device causes harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to eliminate the interference by applying one or more of the following methods:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

To comply with FCC guidelines for radio frequency exposure, the equipment should be installed and operated maintaining a minimum distance of 20 cm between the