4modernhome 7076-2BK Operations Manual

Product Overview

This document provides operations and installation instructions for the 4modernhome 7076-2BK outdoor wall light. This fixture features an intelligent dusk-to-dawn sensor that automatically adjusts lighting based on ambient light levels, turning on at nightfall (below 20 LUX) and off in the morning (above 90 LUX), saving energy and eliminating the need for manual operation.

Where to Place Your Outdoor Wall Lights

Proper placement ensures optimal illumination and sensor function. For a single light next to an entryway or garage door, position it at approximately 1/3 of the door's height. If placing lights on both sides, position them at approximately 1/4 of the door's height. Measure the door height from the floor to the top, then divide by 4 for two lights or 3 for one light. For example, on an 80-inch tall door, lights should be 20 inches tall. Lights should also be mounted 66 inches from the floor or ground for effective illumination of the lock and handle, and positioned 6 inches from the edge of the door. If using a single light, place it on the side of the door closest to the door handle.

? Helpful Tip: Ensure no objects like eaves obstruct the dusk-to-dawn sensor, as this can cause the light to remain on constantly.

Diagram: Outdoor Light Placement

Illustration showing an outdoor wall light fixture mounted on a house exterior. Dimensions are indicated: 20.3" Tall Fixture, 80" height for the door, 80" Door x 0.75 = 60" height for each fixture. The light is positioned relative to the door and ground.

Frequently Asked Questions

1. Does it feature a dusk-to-dawn sensor?

   Yes, this fixture boasts an intelligent dusk-to-dawn sensor that seamlessly transitions from off to on as nightfall approaches, automatically adjusting to ambient light levels below 20 LUX. In the morning, when brightness exceeds 90 LUX, it turns off, saving energy and eliminating the need for manual operation.

2. What could be the reason if the lamp does not turn on during installation?

   If the lamp remains off during installation, it is likely due to the dusk-to-dawn sensor's natural deactivation during daylight hours. To verify functionality, cover the sensor with your hand or a cloth after turning on the power switch. If the lamp illuminates, it confirms the lamp is working as intended, and the issue relates to the sensor's automatic day/night cycle.

3. What if I do not need the dusk-to-dawn functionality?

   This fixture is designed with a convenient rubber cap that allows you to easily disable the dusk-to-dawn feature. Simply slide the cap over the sensor for manual control over the lamp's operation.

4. What should I do if the glass lampshade I received is cracked or broken?

   If your glass lampshade is cracked, broken, or not in perfect condition, please contact customer service immediately. The team is dedicated to providing the best possible solution and ensuring your satisfaction.

Assembly & Installation Instructions

Dear Customer:

Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please contact us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction. We encourage you to share your experience by leaving a product review.

Best regards!
[Support Team]

Applicable Bulb Type:

B10, B11, C35, C7, C9

Warnings & Cautions:

• ⚠️ Warning: If any special control devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If questions arise, contact a qualified electric contractor.
• ⚠️ California Residents Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
• ⚠️ Caution: It is highly recommended to have an electrician install this light. Ensure electricity is turned off at the main circuit breaker before beginning installation. All glass is fragile; use care when handling glass components and/or lamps.

Parts Included:

Wire Connection Diagram:

Wires meeting safety standards are required to connect the electrical circuit.

CAUTION: Risk of fire

Please read all instructions carefully. Before proceeding with installation, ensure the power supply is turned off and remains off until installation is completed.

Diagram showing electrical wiring connections for the light fixture. It depicts the junction box (A), wire caps (B), mounting bracket (C), mounting screws (D), nuts (E), lamp cover (F), lamp body (G), mounting screws (H), light bulb (I), studs (J), mounting screws (K), eye nut (L), flat washer (M), and photoelectric switch (N). Arrows indicate connections to the main power supply (L, N, Ground).

Diagram: Sealing the Gap

Drawing 1: After securing the fixture to the wall, it is recommended that the gap between the wall and the fixture backplate be sealed on the top and both sides with a good quality waterproof caulk or silicone sealant (NOT INCLUDED).

Illustration depicting the sealing of the gap between the fixture's backplate and the wall. A bead of caulk is shown applied to the top and sides of the gap to prevent water ingress.

7076-2BK Installation Steps:

1. Unscrew parts H and K from the lamp body and remove the frame G.
2. Screw off nut E and remove the hanging plate C.
3. Install the hanging plate C lock onto the junction box A using screw D.
4. Transfer the ring L and rubber pad M to the lamp body.
5. Use terminal B to connect the lamp body's black, white, and ground wires to the input lines respectively.
6. Lock the lamp body onto the hanging board C with nut E.
7. Turn the bulb I knob into the lamp head.
8. Install the frame G, locking it onto the lamp body with screws H and K.

Installation completed.