JLab JBuds Band Neckband Headphones

Welcome

We are pleased you are using JLab Audio headphones! We are proud of our products and fully confident in their quality.

Your Warranty

All warranty claims require JLab Audio approval and are handled at our sole discretion. To ensure warranty validity, keep your proof of purchase.

Contact Us

Email us at support@jlabaudio.com or visit our website at intl.jlabaudio.com/contact.

Register Today

Visit intl.jlabaudio.com/register for product updates, tutorials, and FAQs.

First-Time Bluetooth Pairing

1. Turn on Bluetooth on your device.

   [Visual: Smartphone screen displaying Bluetooth settings with the Bluetooth toggle switched ON.]

2. Press and hold the button on the headphones for 10 seconds. Release the button. The indicator light will flash red and blue, signaling pairing mode.

   [Visual: Close-up of the JLab JBuds Band control module showing a button. An indicator light is shown flashing red and blue. Text indicates to press and hold the button for 10 seconds.]

3. Select 'JLab JBuds Band' from your device's Bluetooth settings to connect. The blue indicator light will flash slowly during pairing.

   [Visual: Smartphone screen showing Bluetooth settings with 'JLab JBuds Band' selected and connected.]

Repeated Use

If your JLab JBuds Band is already paired, the headphones will automatically connect to your Bluetooth device after powering on. (Refer to the 'Button Functions' section for detailed instructions.)

Button Functions

• Volume Up: Single press.
• Next Track: Press and hold for 2+ seconds.
• Power On/Off: Press and hold for 2 seconds.
• Play/Pause / Answer Call / End Call: Single press.
• Reject Call: Press and hold for 1 second.
• Activate Siri (iOS) or OK Google (Android): Double press.
• Previous Track: Press and hold for 2 seconds.

Equalizer Modes

To select different equalizer settings, quickly press both buttons (JLab JBuds Band 3 equalizer settings activate sequentially):

• JLab SIGNATURE: Single beep. Provides JLab C3™ sound, highlighting vocals and bass.
• BALANCED: Two beeps. Offers an even sound profile without additional processing.
• BASS BOOST: Three beeps. Delivers enhanced bass and deep bass.

Indicator Sounds

• Power On: Chime sound.
• Bluetooth Connected: 2 beeps.
• Low Battery: "Low Battery" notification (when battery is below 20%).
• Power Off: Chime sound.

Charging

1. Open the USB port cover and connect the cable to a computer or USB power source.

   [Visual: USB port cover being opened and a USB cable being connected to the port.]

2. The red indicator light stays ON during charging. The light turns blue when charging is complete.

   [Visual: Indicator light showing red during charging and turning blue when fully charged.]

Fitting

1. Choose the appropriate ear tip size for a secure fit.

2. Adjust the earbud position using the adjustable ear tip housing for your preferred fit.

   [Visual: Earbud with an adjustable housing. Text describes two positions: Position 1: Snug, deeper fit. Position 2: Relaxed, shallower fit.]

3. Place the neckband around your neck, with the control module positioned on the right side.

   [Visual: Person wearing the neckband headphones around their neck.]

Troubleshooting Connection Issues

I Don't See My JLab JBuds Band on My Device

1. Turn Bluetooth OFF and then ON again in your device's settings.

   [Visual: Smartphone screen showing Bluetooth settings with the toggle being switched OFF and then ON.]

2. If you still do not see the JLab JBuds Band, repeat the steps outlined in the 'First-Time Bluetooth Pairing' section.

JLab JBuds Band Does Not Automatically Connect After Powering On

1. Open your device's settings and select 'Forget JLab JBuds Band' to remove the previous pairing.

   [Visual: Smartphone screen showing Bluetooth settings and the option to 'Forget' or 'Unpair' the device.]

2. Turn Bluetooth OFF and then ON again in your device's settings.

3. Repeat the steps in the 'First-Time Bluetooth Pairing' section.

Bluetooth is Connected to the Wrong Device

Note: The JLab JBuds Band can remember up to 8 devices. It will automatically attempt to connect to the last used device.

1. If the JLab JBuds Band has been connected to multiple devices, turn OFF Bluetooth on the other devices. Then, turn Bluetooth ON for the device you wish to connect to.

   [Visual: Smartphone screen showing Bluetooth settings with multiple devices listed. Bluetooth is shown being turned OFF on one device and ON on another.]

2. Press and hold the button for 10 seconds. Release. The indicator light will flash red and blue, signaling pairing mode. Select 'JLab JBuds Band' from your device's Bluetooth settings to connect. The blue indicator light will flash slowly during pairing.

   [Visual: Close-up of the headphone control module with the indicator light flashing red and blue. Smartphone screen showing connection to 'JLab JBuds Band'.]

Warnings

• Ensure the USB port cover is closed and secured. This protects the device from sweat and water damage. [Visual: USB port cover shown closed and secure.]
• The JLab JBuds Band headphones must be completely dry before charging. Exposure to moisture can damage internal components. It is best to let the headphones air dry before charging. [Visual: Headphones shown air drying.]

Precautions

• Avoid moisture or liquids from entering the earbud tips or charging port.
• Avoid excessive heat, cold, and humidity.
• Avoid dropping, crushing, or stressing the cable. Do not bend the cable at a sharp angle.
• Earwax may accumulate in the ear tips, which can degrade sound quality. To improve sound quality, gently remove earwax using a cotton swab or other small tool.
• If you experience discomfort or pain, reduce the volume or temporarily discontinue using the headphones.
• If you experience persistent discomfort while using the product, stop using it and consult a doctor.
• We recommend treating your headphones similarly to sunglasses; store them in a safe place between uses.

Find more information and tools at JLab Audio.

[Visual: App Store and Google Play badges, with text "Download on the App Store" and "GET IT ON Google play".]

Visit intl.jlabaudio.com for more.