JLab JBuds Band Wireless Neckband Headphones

Your Warranty & Support

YOUR WARRANTY
All warranty claims are subject to approval by JLab Audio at its discretion. Keep your proof of purchase to ensure warranty coverage. [Two Year Limited Warranty badge] [U.S. Based Customer Support badge]

CONTACT US
Contact us at support@jlabaudio.com or go to intl.jlabaudio.com/contact

REGISTER TODAY
Visit intl.jlabaudio.com/register for product updates, useful tips, and FAQs.

First-Time Setup: Bluetooth Pairing

1. Turn on Bluetooth
Enable Bluetooth in your device settings. [Illustration: Smartphone screen showing Bluetooth settings with Bluetooth toggled ON.]

2. Enter Pairing Mode
Press and hold the button on the neckband for 10 seconds. Release. The light will flash red and blue to indicate pairing mode. [Illustration: Neckband control unit showing a button being pressed. A light indicator flashes red and blue.]

3. Connect to Device
Select 'JLab JBuds Band' in your device's Bluetooth settings to connect. The light will flash slow blue when Bluetooth is paired. [Illustration: Smartphone screen showing Bluetooth settings, with 'JLab JBuds Band' selected and a connection being established.]

Repeated Use

After the JLab JBuds Band has been paired with your device for the first time, the earbuds will automatically connect to the Bluetooth device when powered on. (Follow instructions under BUTTON FUNCTIONS for specific controls).

Button Functions

• VOLUME UP: Click once
• NEXT TRACK: Click and hold for min. 2 seconds
• POWER ON/OFF: Click and hold for 2 seconds
• PLAY/PAUSE/ANSWER/END CALL: Click once
• REJECT INCOMING CALL: Click and hold for 1 second
• ACTIVATE SIRI (iOS) OR 'OK GOOGLE' (ANDROID): Double-click
• BLUETOOTH PAIRING: (Follow first-time setup: Bluetooth pairing)
• VOLUME DOWN: Click once
• PREVIOUS TRACK: Click and hold for min. 2 seconds

Equalizer Modes

Press both buttons quickly for different EQ settings. The JBuds JBuds Band will cycle through 3 EQ settings:

• JLab Signature (One Pip): JLab C3™ signature sound with boosted vocals and bass
• BALANCED (Two Pip): Even sound without additional audio enhancements
• BASS BOOST (Three Pip): Amplified bass and sub-bass

Audio Cues

• ON: Chime
• BLUETOOTH PAIRED: 2 Pips
• LOW BATTERY: 'Low Battery' (less than 20%)
• OFF: Chime

Charging

1. Connect Cable
Open the USB port and connect the cable to a computer or USB power source to charge. [Illustration: USB port on earbuds being opened and a charging cable being connected.]

2. Charging Indicator
The light will be solid red while charging and blue when fully charged. [Illustration: Earbuds showing a red charging light and a blue fully charged light.]

Fitting

1. Choose Ear Tip Size
Select your preferred ear tip size for a secure fit. [Illustration: Various sizes of ear tips.]

2. Adjust Earbud Position
Adjust the earbud to your preferred position using the adjustable ear tip placement. [Illustration: Earbud being adjusted for fit. Text labels indicate 'POSITION 1: Tighter and deeper fit' and 'POSITION 2: Relaxed and looser fit'.]

3. Wear Neckband
Place the neckband around your neck with the controls on the right side. [Illustration: Person wearing the neckband headphones around their neck, with controls on the right.]

Connection Troubleshooting

I Don't See JLab JBuds Band on My Device

1. Toggle Bluetooth: Turn off Bluetooth, then turn it back on in your device settings. [Illustration: Smartphone screen showing Bluetooth settings being toggled off and on.]

2. Re-pair: If you still do not see JLab JBuds Band, repeat FIRST-TIME SETUP: Instructions for BLUETOOTH PAIRING. [Illustration: Smartphone screen showing Bluetooth settings, indicating the need to re-pair.]

JLab Doesn't Connect to My Device Anymore When Turned On

1. Forget Device: Forget JLab JBuds Band in your device settings. [Illustration: Smartphone Bluetooth settings showing the option to 'Forget' or 'Unpair' the device.]

2. Toggle Bluetooth: Turn off Bluetooth, then turn it back on in your device settings. [Illustration: Smartphone screen showing Bluetooth settings being toggled off and on.]

3. Re-pair: Repeat FIRST-TIME SETUP: Instructions for BLUETOOTH PAIRING. [Illustration: Smartphone screen showing Bluetooth settings, indicating the need to re-pair.]

Bluetooth Connects to an Unwanted Device

Note: JLab JBuds Band can remember up to 8 devices. It will attempt to automatically connect to the last device used.

1. Select Correct Device: If you have more than one device that has been connected to JLab JBuds Band, turn OFF Bluetooth on unwanted devices and turn ON Bluetooth on the desired device. [Illustration: Smartphone screen showing multiple Bluetooth devices listed, with the user selecting the correct one.]

2. Re-pair if Necessary: Press and hold the button for 10 seconds. Release. The light will flash red and blue to indicate pairing mode. Select 'JLab JBuds Band' in your device settings to connect. The light will flash slow blue when Bluetooth is paired. [Illustration: Neckband control unit showing a button being pressed for pairing mode, and a smartphone connecting.]

Warnings & Cautions

WARNING

• Ensure the USB port is closed and secured. This protects against sweat and water damage. [Illustration: USB port on earbuds shown closed and secured.]
• Before charging, the JLab JBuds Band earbuds must be completely dry. Exposure to moisture can damage internal components. It is best to let them air dry before charging. [Illustration: Earbuds shown air drying before charging.]

CAUTION

• Avoid moisture and liquid in the earbud tips and charging port.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds, pulling hard or applying other extreme force to the cable, or bending the cable at sharp angles.
• Earwax can build up in the earbud tips, which can degrade sound quality. Gently remove wax with a cotton swab or other small tool to improve sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use of the product for a period.
• If you experience persistent discomfort while using this product, discontinue use and consult a doctor.
• We recommend treating the earbuds with the same care as expensive sunglasses, and storing them in a safe place when not in use.