GERSBY Bookcase
Assembly Instructions
Brand: IKEA
Safety First!
WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.
Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.
This important safety warning is provided in multiple languages within the original document.
Parts and Tools
The following components are included in the package:
- 12x Wooden dowels (Part ID: 101350)
- 16x Shelf pins (Part ID: 101532)
- 12x Cam lock screws (Part ID: 109041)
- 2x Screws (Part ID: 100214)
- 4x Brackets (Part ID: 100823)
- 1x U-shaped wall bracket (Part ID: 100001)
- 2x L-shaped wall brackets (Part ID: 100823)
- 2x Wall attachment straps (Part ID: 106989)
Tools required (not included):
- Screwdriver ?
- Hammer ?
- Pencil ✏️
- Measuring tape ?
- Drill (for wall mounting) ड्रिल
Assembly Steps
Step 1: Assemble the main frame. Connect the bottom panel to the two side panels using 12x dowels (101350) and 12x cam lock screws (109041). Secure with cam locks.
Step 2: Attach the fixed middle shelf and the top panel to the side panels using dowels (101350) and cam lock screws (109041). Secure with cam locks.
Step 3: Insert 4x internal brackets (100823) into the pre-drilled holes on the side panels to support the fixed shelves.
Step 4: Attach the bottom panel to the assembled sides. Insert dowels (101350) and cam lock screws (109041). Secure with cam locks.
Step 5: Slide the back panels into the grooves on the back of the unit. Secure them with 2x screws (100214) and 4x brackets (100823).
Step 6: Wall Attachment. To prevent tip-over, secure the bookcase to the wall. Attach the provided L-shaped wall brackets (100823) to the wall using suitable screws and wall plugs (not included). Attach the wall attachment straps (106989) to the top rear of the bookcase. Connect the straps to the wall brackets.
Step 7: Insert the 16x shelf pins (101532) into the desired holes on the side panels. Place the adjustable shelves onto the pins.
