SÅGMÄSTARE Shelving Unit Assembly Instructions
Important Information & Safety
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.
Wall fastening devices are not included as different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.
Read and follow each step of the instructions carefully. Keep this information for future reference.
Parts Included
- 12x Screws (Part No. 10130087)
- 4x Screws (Part No. 10045513)
- 4x Screws (Part No. 10036516)
- 2x Brackets/Clips (Part No. 10121907)
- 2x Wall mounting plates/brackets (Part No. 114664)
- 1x Adhesive pads/strips (Part No. 10114785)
Assembly Steps
Step 1
Prepare the four vertical support pieces. Screw one type of screw (Part No. 10036516) into one end of each piece. Screw another type of screw (Part No. 10130087) into the other end of each piece.
Step 2
Insert the four prepared vertical support pieces into the designated holes on the base shelf. Screw them securely into place.
Step 3
Place the second shelf onto the tops of the vertical support pieces.
Step 4
Place the third shelf onto the tops of the vertical support pieces.
Step 5
Place the top shelf onto the tops of the vertical support pieces.
Step 6
Insert screws (Part No. 10130087) through the top shelf into the vertical support pieces.
Step 7
Place the second shelf onto the vertical support pieces.
Step 8
Place the third shelf onto the vertical support pieces.
Step 9
Place the top shelf onto the vertical support pieces.
Step 10
Secure the top shelf by inserting screws (Part No. 10045513) from the top into the vertical supports.
Step 11
Attach the wall mounting brackets (Part No. 114664) to the back of the shelving unit. Use the provided clips (Part No. 10121907) and adhesive pads (Part No. 10114785) as shown in the diagrams to secure the brackets to the unit.
Step 12
Adjust the feet of the shelving unit by screwing them in or out to ensure the unit is level on the floor.
Step 13
Position the shelving unit against the wall. Use the attached wall mounting brackets and appropriate wall-fastening devices (not included) to securely fix the unit to the wall. Ensure the fasteners are suitable for your wall type.