TROFAST Storage Unit
Safety Warnings
WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts List
The following parts are included:
- 28x Screws (Part #100229/100232)
- 52x Dowels (Part #101350)
- 24x Screws (Part #100349)
- 1x Allen Key (Part #100006)
- 1x Allen Key (Part #109049)
- 2x Wall Brackets (Part #100823)
- 1x Long Rail (Part #120056)
- 1x Short Rail (Part #130379)
Note: Wall screws and plugs are not included and must be purchased separately, suitable for your wall type.
Assembly Steps
Step 1
Attach 6 wooden planks to two side panels using screws.
Diagram shows two vertical side panels. Six horizontal wooden planks are attached to them using screws.
Step 2
Attach 3 back panels to the structure using 8 dowels (Part #101350) each.
Diagram shows three rectangular back panels being attached to the frame using dowels (Part #101350).
Step 3
Attach a side panel to the main structure using 1 screw and the Allen key (Part #100006).
Diagram shows a side panel being attached to the frame. A close-up shows a screw being inserted and tightened with an Allen key (Part #100006).
Step 4
Insert two horizontal support pieces into the frame, indicated by arrows.
Diagram shows two horizontal support pieces being slid into slots on the main frame, with arrows indicating the direction of insertion.
Step 5
Attach the remaining side panels using 5 screws (Part #100229/100232) each.
Diagram shows two more side panels being attached to the frame. A close-up shows screws (Part #100229/100232) being inserted into pre-drilled holes.
Step 6
Attach another side panel using 1 screw (Part #100229/100232).
Diagram shows another side panel being attached to the frame, secured with a screw (Part #100229/100232).
Step 7
Attach two horizontal support pieces using 2 screws (Part #100229/100232) each.
Diagram shows two horizontal support pieces being attached to the frame, secured with screws (Part #100229/100232).
Step 8
Attach three back panels using 3 screws (Part #100229/100232) each.
Diagram shows three back panels being attached to the frame, secured with screws (Part #100229/100232).
Step 9
Attach a side panel using 1 screw (Part #100229/100232).
Diagram shows a side panel being attached to the frame, secured with a screw (Part #100229/100232).
Step 10
Attach two horizontal support pieces using 2 screws (Part #100229/100232) each.
Diagram shows two horizontal support pieces being attached to the frame, secured with screws (Part #100229/100232).
Step 11
Attach four horizontal support pieces using 4 dowels (Part #101350) each.
Diagram shows four horizontal support pieces being attached to the frame using dowels (Part #101350).
Step 12
Attach a back panel using 4 dowels (Part #101350).
Diagram shows a back panel being attached to the frame using dowels (Part #101350).
Step 13
Slide a back panel into place, indicated by a curved arrow.
Diagram shows a back panel being slid into grooves on the frame.
Step 14
Attach the back panel using 4 screws (Part #100229/100232).
Diagram shows the back panel being secured to the frame with screws (Part #100229/100232).
Step 15
Attach two horizontal planks using 4 dowels (Part #101350) each.
Diagram shows two horizontal planks being attached to the frame using dowels (Part #101350).
Step 16
Insert horizontal support pieces into the frame, indicated by arrows.
Diagram shows horizontal support pieces being slid into place within the frame.
Step 17
Attach the final back panel using 9 screws (Part #100229/100232).
Diagram shows the last back panel being attached to the frame, secured with screws (Part #100229/100232).
Step 18
The assembly is complete. The unit is shown in its final form. Attach the provided wall brackets (Part #100823) to the unit and then to the wall using appropriate screws and plugs (not included). Do not sit on the furniture.
Diagram shows the fully assembled TROFAST unit. A close-up illustrates attaching the wall bracket (Part #100823) to the unit and then to the wall using screws. A prohibition symbol is shown over a person sitting on the unit, indicating this is not allowed.
