JONAXEL Storage System
Safety Information
⚠️ WARNING: Furniture tipover can cause serious injury or death.
- ALWAYS install the anti-tip device provided.
- NEVER place a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instructions carefully.
Parts Included
| Part Identifier | Description | Quantity Included (as per page 4) |
|---|---|---|
| 10003068 | Screw | 4x |
| 10004342 | Bracket | 2x |
| 10004344 | Connector | 2x |
| 124461 | Foot/Caster Part | 2x |
| 10003467 | Swivel Part / Drawer Guide | 1x |
Assembly Steps
Step 1 & 2: Frame Assembly
Attach four brackets (10004342) to the bottom of the two vertical frame pieces, two brackets per piece. Use two screws (10003068) for each bracket, totaling eight screws. The diagram shows a hammer (?) being used to tap the screws into place.
Diagram shows attaching brackets to the base of the vertical supports.
Step 3: Top Support
Attach the top horizontal support bar to the vertical frame pieces using four screws (10003068). The diagram shows a hammer (?) being used to tap the screws into place.
Diagram shows attaching the top crossbar.
Step 4: Attach Feet
Insert two feet/casters (124461) into the bottom brackets. The diagram shows them being pushed in until they click.
Diagram shows inserting feet into the bottom of the frame.
Step 5: Attach Top Connectors
Attach two connectors (10004344) to the top of the frame. The diagram shows them sliding into place and clicking.
Diagram shows attaching connectors to the top of the frame.
Step 6: Wall Mounting Preparation
Attach two wall mounting brackets (124461) to the wall. The diagrams indicate using screws of 3mm (1/8"), 10mm (3/8"), or 15mm (5/8") depth, depending on the wall material and screw type used. This step is crucial for stability and preventing tipover. A warning symbol (⚠️) is shown.
Diagrams show measuring distances from the wall and attaching wall brackets.
Step 7: Connecting Units
If connecting multiple JONAXEL frame units, align them side-by-side. Secure the units together using four screws (10003068) at the connection points. The diagram shows two frame units being joined.
Diagram shows two frame units being connected.
Step 8: Attach Drawer Runners
Attach four drawer runners/guides (10004344) to the inside of the frame. The diagram shows them sliding into place with a "click" sound.
Diagram shows attaching drawer runners to the frame interior.
Step 9: Insert Drawers/Baskets
Insert two drawer baskets/boxes (10003467) into the runners. The diagram shows them sliding in with a "click" sound.
Diagram shows inserting drawer baskets into the runners.
Step 10: Final Wall Securing
Ensure the unit is securely fastened to the wall using the previously installed wall mounting brackets. The diagram shows a person securing the unit to the wall brackets.
Diagram shows final securing of the unit to the wall.
Product Configurations
The JONAXEL system can be configured in various ways, including single units, multiple connected units, and units with different numbers of shelves or drawers, as shown in the diagrams.
Diagrams show different JONAXEL configurations.
