Eufy 4G LTE Camera S330: What's in the Box and Setup

What's in the Box

• 4G LTE Camera S330
• Camera Mounting Bracket
• Solar Panel
• Solar Panel Bracket
• Pole Mounting Strap
• Nano SIM Card
• USB-C Charging Cable
• Screw Set
• Quick Start Guide
• Positioning Stickers x2
• microSD Card

At a Glance

The camera features the following components:

• 1 LED Indicator
• 2 Speaker
• 3 microSD Card Slot
• 4 Light
• 5 Lens
• 6 Microphone
• 7 Light Sensor
• 8 SIM Card Slot
• 9 SYNC Button
• 10 USB-C Charging Port

Diagram showing the front and back of the Eufy 4G LTE Camera S330 with numbered components.

Inserting SIM Card and microSD Card

1. Open the waterproof cover of the nano SIM slot on the back of the camera. Insert the provided nano SIM card with the gold contacts facing up.
2. Rotate the camera and open the waterproof cover of the SD card slot. Insert a microSD card with the chip side facing up.
3. Close the waterproof covers tightly after inserting the cards.

Diagram illustrating the insertion of a nano SIM card into its slot and a microSD card into its slot.

Charging the Camera

Fully charge the camera before initial use. Charging takes approximately 3 to 5 hours.

LED Indicator Status:

• Solid Blue: Charging
• Light Off: Fully charged

Diagram showing the camera connected to a power source via USB-C, indicating a 5V/2.5A input.

Setting up the Camera

1. Download and install the Eufy Security app from the App Store or Google Play. Sign in or create an account.
2. Follow the in-app instructions to add the camera to your device list.

Diagram showing a smartphone with the Eufy Security app open, indicating the process of adding a device.

Mounting your Camera

Select a Location and a Height

Choose a location that provides the desired view. It is recommended to mount the camera 8–10 ft (2.5–3 m) above the ground.

To ensure no detection is missed, avoid installing the camera directly facing the monitoring area. Maintain an angle to prevent potential blind spots.

Diagram illustrating the recommended mounting height and angle for optimal detection.

Select a Location for the Solar Panel

Choose an optimal location for the solar panel that receives sufficient sunlight and is within a 10 ft (3 m) radius of the camera. Ensure the location has suitable facilities or structures for mounting.

To maximize solar energy absorption, select an orientation based on your location:

Mount the Camera

1. Drill holes using a 15/64 inch (5.95 mm) drill bit and the provided positioning card. Insert the anchors into the holes.
2. Firmly secure the camera onto the mounting bracket.
3. Connect the solar panel to the camera using the USB-C cable (5V/0.9A).

Diagrams showing the process of drilling holes, mounting the camera bracket, and connecting the solar panel to the camera.

Bundling the Camera on a Post

The camera can also be mounted on a post using the provided pole mounting strap.

Diagram illustrating how to attach the camera to a post using the pole mounting strap.

Install the Solar Panel

1. Secure the mounting bracket in the selected optimal location. Install the solar panel onto the mounting bracket by turning it.
2. Remove the protective film from the solar panel before use.

Diagrams showing the installation of the solar panel bracket and the solar panel itself.