eufy 4G LTE Camera S330
What's in the Box
The package includes:
- 4G LTE Camera S330
- Camera Mounting Bracket
- Solar Panel
- Solar Panel Bracket
- Pole Mounting Strap
- Nano SIM Card
- USB-C Charging Cable
- Screw Set
- Quick Start Guide
- Positioning Stickers x2
At a Glance
The eufy 4G LTE Camera S330 has the following components:
- 1. LED Indicator: Indicates the camera's status.
- 2. Speaker: For audio output.
- 3. microSD Card Slot: For local storage.
- 4. Light: Illuminates the area.
- 5. Lens: Captures video footage.
- 6. Microphone: For audio input.
- 7. Light Sensor: Detects ambient light levels.
- 8. Antenna Port: (Optional) For attaching an antenna to boost signal strength.
- 9. SIM Card Slot: For the nano SIM card.
- 10. SYNC Button: Used for synchronization.
- 11. USB-C Charging Port: For charging the camera.
Inserting SIM Card and microSD Card
- Open the waterproof cover of the nano SIM slot on the back of the camera. Insert the provided nano SIM card with the gold contacts facing up.
- Rotate the camera and open the waterproof cover of the SD card slot. Insert a microSD card (not provided) with the chip side facing up.
Ensure the waterproof covers are tightly closed after inserting the cards.
Charging the Camera
Fully charge the camera before its initial use. Charging takes approximately 3 to 5 hours.
The camera can be charged using a 5V/2.5A power source via the USB-C port.
LED Indicator Status
| LED Indicator Status | Charging Status |
|---|---|
| Solid Blue | Charging |
| Light Off | Fully charged |
Setting up the Camera
- Download and install the eufy Security app from the App Store or Google Play. Sign in or create an account.
- Follow the in-app instructions to add the camera to your device list.
Mounting your Camera
Select a Location and a Height
Choose a location that provides the desired view. It is recommended to mount the camera 8-10 ft (2.5-3 m) above the ground.
The camera can be mounted up to 30 ft (9m) away from the solar panel.
To ensure no detection is missed, avoid mounting the camera directly facing the monitoring area. Instead, angle it to prevent blind spots.
Select a Location for the Solar Panel
Choose an optimal location for the solar panel that receives sufficient sunlight and is within a 10 ft (3 m) radius of the camera. Ensure the location has suitable facilities or structures for mounting.
To maximize solar energy absorption, orient the solar panel based on your location:
| Your Location | Highly Recommended Orientation | Recommended Orientation | Not Recommended Orientation |
|---|---|---|---|
| Northern Hemisphere (US, UK, EU) | True South | Southwest or Southeast | North |
| Southern Hemisphere (Australia) | True North | Northwest or Northeast | South |
Mount the Camera
- Drill holes using a 15/64 inch (5.95 mm) drill bit and the provided positioning card. Insert the anchors into the holes.
- Firmly secure the camera onto the mounting bracket.
The camera should be mounted approximately 20 cm away from the wall.
Bundling the Camera on a Post
The camera can also be mounted on a post using the pole mounting strap.
Install the Solar Panel
- Secure the mounting bracket in the selected optimal location. Install the solar panel onto the mounting bracket by turning it.
- Remove the protective film from the solar panel before use.
Connecting the Solar Panel
Connect the solar panel to the camera using the USB-C cable.
