Eufy 4G LTE Camera S330
Setup, Installation, and Usage Guide
What's in the Box
- 4G LTE Camera S330
- Camera Mounting Bracket
- Solar Panel
- Solar Panel Bracket
- Pole Mounting Strap
- Nano SIM Card
- USB-C Charging Cable
- Screw Set
- Quick Start Guide
- Positioning Stickers x2
- microSD Card
At a Glance
The Eufy 4G LTE Camera S330 features the following components:
- 1. LED Indicator: Provides status information.
- 2. Speaker: For audio output.
- 3. microSD Card Slot: For local storage.
- 4. Light: Built-in illumination.
- 5. Lens: Captures video footage.
- 6. Microphone: For audio input.
- 7. Light Sensor: Detects ambient light levels.
- 8. SIM Card Slot: For cellular connectivity.
- 9. SYNC Button: Used for pairing and synchronization.
- 10. USB-C Charging Port: For power input.
Inserting SIM Card and microSD Card
- Open the waterproof cover of the nano SIM slot located on the back of the camera. Insert the provided nano SIM card with the gold contacts facing upwards.
- Rotate the camera and open the waterproof cover of the SD card slot. Insert a microSD card with the chip side facing upwards.
Ensure both waterproof covers are closed tightly after inserting the cards to maintain weather resistance.
Charging the Camera
Fully charge the camera prior to its initial use. Charging typically takes 3 to 5 hours to complete.
The camera charges via USB-C with a 5V/2.5A input.
Charging Indicator Status:
| LED Indicator Status | Charging Status |
|---|---|
| Solid Blue | Charging |
| Light Off | Fully charged |
Setting up the Camera
- Download and install the eufy Security app from the [Download on the App Store] or [Get it on Google Play]. Sign in or create an account.
- Follow the in-app instructions to add the camera to your device list.
Mounting your Camera
Select a Location and a Height
Choose a location that provides the desired view. It is recommended to mount the camera 8–10 ft (2.5–3 m) above the ground.
To ensure optimal detection, avoid installing the camera directly facing the monitoring area. Instead, angle it to prevent potential blind spots. ❌ Direct facing may miss detections, while angling ✔️ improves coverage.
Select a Location for the Solar Panel
Choose an optimal location for the solar panel that receives sufficient sunlight and is within a 10 ft (3 m) radius of the camera. Ensure the location has suitable facilities or structures for mounting.
For maximum solar energy absorption, select the installation orientation based on your geographical location:
| Your Location | Highly Recommended | Recommended | Not Recommended |
|---|---|---|---|
| Northern Hemisphere (US, UK, EU) | True South | Southwest or Southeast | North |
| Southern Hemisphere (Australia) | True North | Northwest or Northeast | South |
Mount the Camera
- Drill holes using a 15/64 inch (5.95 mm) drill bit and the provided positioning card. Insert anchors into the holes.
- Firmly secure the camera onto the mounting bracket.
- Connect the solar panel to the camera using the USB-C cable. The connection provides 5V/0.9A power.
Bundling the Camera on a Post
The camera can also be mounted on a post using the provided pole mounting strap. This involves securing the strap around the post and attaching the camera mount to it.
Install the Solar Panel
- Secure the mounting bracket in the selected optimal location. Then, install the solar panel onto the mounting bracket by turning it until it is firmly attached.
- Remove the protective film from the solar panel surface before use to ensure maximum sunlight absorption.
