Moen Chateau Posi-Temp Single-Handle Tub/Shower Trim Kit Specifications

Product Overview

This document provides detailed specifications for the Moen Chateau Posi-Temp Single-Handle Tub/Shower Trim Kit.

Description

Metal construction with various finishes identified by suffix.
Includes non-metallic showerhead, arm, flange, and non-metallic diverter tub spout.

Operation

Handle operates counterclockwise through a 270° arc, with the off position at 6 o'clock and maximum hot at the 9 o'clock position. Shut off is in the clockwise direction.
Features an adjustable temperature limit stop to control maximum hot water temperature.
Equipped with a pressure balancing mechanism that maintains selected discharge temperature to ± 3°.

Flow

Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi.
EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi.
NH suffix models do not include a showerhead.

Cartridge

Features a 1222 cartridge design.
Accommodates back-to-back installations.
Constructed from non-metallic/nonferrous and stainless steel materials.

Standards

Third-party certified to meet ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein.
EP suffix models are third-party certified to WaterSense® [WaterSense certified].
✅ for lever handle.

Warranty

Lifetime limited warranty against leaks, drips, and finish defects to the original consumer purchaser.
5-year warranty if used in commercial installations.

Product Models

CHATEAU POSI-TEMP Single-Handle Tub/Shower Trim Kit

Models:

TL5181 series - valve trim only (Bulk Packed 12 per carton)
TL5182 series - shower trim only (Bulk Packed 12 per carton)
TL5182NH series - shower trim only, no head (Bulk Packed 12 per carton)
TL5183 series - tub/shower trim (Bulk Packed 12 per carton)
TL5183NH series - tub/shower trim only, no head (Bulk Packed 12 per carton)

Valves: 62300 series, 2500 series

Installation Diagrams

Thick Wall Application

This diagram illustrates the installation for thick walls. It shows a cross-section of the wall with the valve body positioned behind the finished wall. Key components include the showerhead and arm extending from the wall, the handle and trim plate on the finished wall, the valve body connected to water supply lines, and the tub spout positioned above the tub rim. Dimensions provided include: finished wall line to valve body center: 2" CC (51mm); wall opening diameter: 4-1/2" (114mm); shower height from floor line: 45" (1143mm) to 48" (1219mm); tub/shower height from floor line: 32" (813mm); tub spout height from floor line: approximately 6.5" (165mm) ESC. DIAM. The diagram also indicates the distance from the face of the stud to the finished wall (1/2" MIN. CC / 13mm to 5/8" MIN. IPS / 16mm), a plaster ground, and the direction of handle rotation. The tub rim and floor line are marked.

Thin Wall Application

This diagram illustrates the installation for thin walls, often involving a plastic tub/shower surround. It shows the valve body and trim components, including the showerhead and arm, handle and trim plate, valve body, and tub spout. Dimensions provided include: nominal wall opening diameter: 3-1/2" (89mm) MAX, 2-1/4" (57mm) MIN; distance from wall to showerhead arm: 1-1/2" MAX (38mm); tub spout height from floor line: approximately 1-3/8" (35mm). The plastic tub/shower surround is indicated, and the floor line is marked.

	Moen IVER™ Single-Handle POSI-TEMP® Tub/Shower Trim Kit Specifications Detailed specifications for the Moen IVER™ Single-Handle POSI-TEMP® Tub/Shower Trim Kit, including features, operation, flow, cartridge, standards, warranty, and dimensions.
	Moen Gibson™ Single-Handle Tub/Shower Trim Kit Specifications Detailed specifications for the Moen Gibson Single-Handle Tub/Shower Trim Kit, including model numbers T3002EP and T3003EP, operation, flow rates, standards, warranty, and critical installation dimensions for both thick and thin wall applications.
	Moen Chateau Posi-Temp Single-Handle Tub/Shower Trim Kit Specifications Detailed specifications for the Moen Chateau Posi-TEMP Single-Handle Tub/Shower Trim Kit, including features, operation, flow rate, cartridge details, standards, warranty information, and installation dimensions for thick and thin wall applications. Features chrome-plated finish and WaterSense certification.
	Moen Genta POSI-TEMP Single-Handle Tub/Shower Trim Kit Specifications Detailed specifications for the Moen Genta POSI-TEMP Single-Handle Tub/Shower Trim Kit, including model numbers, operation, flow rate, cartridge type, standards, and warranty information.
	Moen Chateau Posi-Temp Single-Handle Tub/Shower Valve L23553EP Specifications Detailed specifications for the Moen Chateau Posi-Temp Single-Handle Tub/Shower Valve (Model L23553EP), covering its description, operation, flow, cartridge, standards, and warranty. Includes installation diagram descriptions.
	Moen IVER™ POSI-TEMP® 3-Function Transfer Valve Trim Specifications Detailed specifications for the Moen IVER™ POSI-TEMP® Built-In 3 Function Transfer Valve Trim, including operation, standards, warranty, and installation dimensions. Model T2570 Series.
	Moen One Handle Tub/Shower Valve Trim Installation Instructions This document provides installation instructions and troubleshooting guidance for Moen one-handle tub and shower valve trims, including the One Handle Tub/Shower Valve Trim and One Handle Shower Only Valve Trim. It covers various plumbing rough-in types, installation schematics, trim installation, temperature limit stop adjustment, care instructions, and warranty information.
	Moen Glyde Single-Handle Tub/Shower Trim Kit with Rainshower Specifications Detailed specifications for the Moen Glyde Single-Handle Tub/Shower Trim Kit with Rainshower, including features, operation, flow rates, materials, standards, and warranty information. Includes critical dimensions for thick wall applications.