Moen Gibson™ Single-Handle Tub/Shower Trim Kit Specifications

Description

Metal construction with various finishes identified by suffix.
Includes showerhead, arm, flange, and diverter tub spout.

Operation

Lever style handle with red/blue temperature indicator on the escutcheon.
Handle operates counterclockwise through a 270° arc with off at 6 o'clock and maximum hot at the 9 o'clock position. Shut off in clockwise direction.
Adjustable temperature limit stop to control maximum hot water temperature.
Pressure balancing mechanism maintains selected discharge temperature to ± 3°.

Flow

EP suffix models are limited to 2.0 gpm (7.6 L/min) max for products manufactured prior to June 30, 2018.
EP suffix models manufactured after June 30, 2018 are limited to 1.75 gpm (6.6 L/min) max.

Cartridge

1222 cartridge design.
Accommodates back-to-back installations.
Nonmetallic, nonferrous, and stainless steel material.

Standards

Third party certified to meet ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein.
EP suffix models are third party certified to WaterSense [WaterSense Certified].
ADA [ADA Compliant] for lever handle.

Warranty

Lifetime limited warranty against leaks, drips, and finish defects to the original homeowner.
10-year limited warranty when used in a multifamily installation.
5-year limited warranty when used in a commercial installation.
Visit www.moen.com/support for complete details and limitations.

Models and Valves

Models: T3002EP series - shower trim only, T3003EP series - tub/shower trim

Valves: 62300 series, 2500 series

Critical Dimensions

Thick Wall Application

Diagram shows a showerhead with an 8" (203mm) diameter. Showerhead: 8" (203mm) diameter.

Diagram shows wall opening dimensions for thick wall application. Wall Opening: 4-1/2" (114mm).

Valve Connections:

Center-to-Center (CC) ports: 1-7/8" (48 mm) Max.
Iron Pipe Size (IPS) connections: 1/2" (13 mm) Min.

Diagram shows escutcheon plate and shower arm clearance. Escutcheon Plate: 7" (178mm) diameter. Shower Arm Clearance: 2-5/8" (66mm) from wall.

Diagram shows tub spout clearance and connection. Tub Spout Clearance: 6-1/2" (165mm) from tub rim. Tub Spout Connection: 1-3/8" (35 mm) Max.

Diagram shows handle operation arc and dimensions. Handle Operation: 270° arc. Handle Dimensions: 1-3/8" (35 mm) Max.

Diagram shows maximum and minimum handle depth from wall. Max Handle Depth from Wall: 3-1/2" (89 mm) Max. Min Handle Depth from Wall: 2-1/4" (57 mm) Min.

Diagram shows shower height and tub/shower height from floor. Shower Height from Floor: 45" (1143mm) Min. to 48" (1219mm) Max. Tub/Shower Height from Floor: 32" (813mm).

Diagram indicates M-pact System. M-pact System [M-pact System] is indicated.

Note: Dimensions are not to scale.

Thin Wall Application